CALIBRATION CERTIFICATE i
Beas ERS od
Sitlas Copco tentec Limited Part of the Atlas Copco Group
pee Unit F1, innovation drive, Pendeford,
Wolverhampton
West Midlands, WV9 5GA, UK
CertificateNo: T-5147 Calibration Date: 24/03/2021 Approved Signatory
ieecion togieoer an Wien signed: —Te~ Luehert——_ an Watson
Tool De jon Customer
Description: Hydraulic Torque Wrench “POWER TOOLS DISTRIBUTION N.V (PTD) |
INDUSTRIELAAN 40,
RT-3SQ0R B-3730 HOESELT
tes12416-062 BELGIUM
32 (0) 89510411
Equipment Used
Torque Transducers: TSD 4011 SIN (6562
Calibrated by Attas Copco BLM - Accredia
Accreditation - LAT 059
Pressure Transducers: TSD 10KPT RHYD SIN (196112)
Calibrated by CHAMOIS METROLOGY -
UKAS Accreditation - 0822
Display Unit: TSD 6500-2 S/N (20845)
Calibrated by - Atlas Copco BLM - Accredia
Accreditation - LAT 059
Reaction Foot: RA-193124/16.062
Calibration Procedure
0 to 4,000 Ibf ft Torque transducer
From 10% to 100%: 0.1%
From 0% to 10%: #2 divisions (10 LB-FT)
(0 TO 10000 Psi Pressure transducer
From 10% to 100%: 0.1%
From 0% to 10%: 42 divisions (2 Psi)
Max Capacity
Torque - 40,000 Ibt ft
Pressure - 10,000 Psi
Calibration done in accordance with procedure "TCP6 -REVB" based on standard ISO 6789: 2003
‘Traceability
‘All measuring equipment used for calibration purposes is traceable to National or Internationally recognised
standards
Test Conditions
‘Temperature: 20.09
Humidity: 40.60
‘The temperature did not fluctuate by more than +/- 1° Celsius during the measurement series
This cerlfcate provides traceabilty of measurement to the SI system of units andlor to units of measurement realised atthe National
Physical Laboratory or other recognised national metrology institutes. Ths certificate may not be repoduced other than in ful, except with
‘he prior written aproval ofthe issuing laboratory.
Intemet wor tentecnet
Telephone +44 (0)121 624 1990Page 2 of 2
CALIBRATION CERTIFICATE
Cortificate No: 17-5147 Callbration Date: 24/03/2021
Model: RT-3SQDR
Serial No: 193124/16-062
2000 | 138 |/1999.2/138 639.5 [655.5 657.0 |656.0 658.0 [653.2 _| [+/-] 3.00%
[e000 | 414 | /5998.8)474 1969.0 |1976.5 1976.0 _|1978.5 _|1981.5 1976.3 | [+/-] 3.00%
(10000) 689 | 9998.2/689 3286.0 3284.5 (3276.5 [3278.0 (3277.5 |32805 | [+] 300%
2000 | 138 ||1999.2/138 [867.0 [8887 [890.8 [889.4 (892.1 (885.6 _| [+/-] 3.00 %
6000 | 414 | /5998.8/414 [2669.6 [2679.8 |2679.1 |2682.5 (2686.6 [2679.5 | [+/-] 3.00 %
10000] 689 | 998.2689 /4455.2 (4453.2 4442.3 |44aa.4 [4443.7 [4447.8 | [+7] 3.00%
cen: nd IbFft
nooo 2000 3000 ~~ 4000 ~~«s0o~~—«6000 «7000 «000 | 00010000
Pressure (PSI)
Iscton cathe ns
“Thi Phos se: Powe Tos tution
BE sercenensue (ol | 2.4
At seme: Ue ya
si
Intemet: www tentec.net Telephone +44 (0)121 524 1990Tentec Limited
Rees Unie Ft
Innovation Drive
Pendeford, Wolverhampton
\W9 5GA
eS Unites Kingdom
Telephone +44 (0)121 524 1990
ATLAS COPCO
POWER TOOLS DISTRIBUTION internet: www.tentec.net
INDUSTRIELAAN 40 ‘email: bolting@uk.atlascopco.com
B-3730 HOESALT
BELGIUM Customer O/N. 4510613089
2
eouiserendo Our Ref 10814
Advice Note 23/03/2021
Page 1/1
certificate of conformity & pressure test certificate
Qty Description Part Number
1 RT-08 Square Drive Wrench 18434201005
Test Pressure 700 BAR
‘Max Working Pressure 700 BAR
SIN 193124/16-062
EC DECLARATION OF INCORPORATION
Hydraulic Torque Wrench The equipment listed left are intended for assembly with, bol tensioning hose, bolt tensioners, and
bolt tensioning pumps supplied or approved for use by Tentec Lid, to constitute machinery covered
by Directive 2006/42/EC. They must not be placed into service until all tems have been declared in
‘conformity with the provisions of the 2006/42/EC Directive. The following EHSR's sections covered
by annex C of the directive have been complied with. Section 1,3 & 4. Assembly instructions are
provided by Tentec in accordance with Annex VI. A technical document is compiled in accordance
with Annex VII of the Directive.
BLOCK NAME DAVID JONES
BLOCK POSITION GENERAL MANAGER
UKCA DECLARATION OF CONFORMITY
Hydraulic Torque Wrench This document confirms that the products listed above conform fo UKGA requirements. Tentec
Ld take full responsiblity for the compliance with UKCA requirements.
We herewith certty based on pressure testing and dimensional inspection thatthe items supplied under the above
purchase order ara in accordance with the requirements ofthe order in particular to
fa) The fulfilment of material requirements.
5} The fulfilment of the required accuracy to, gauge, tolerances, quality surface
(o) The fullment of performance
Authorised Signature oowiap ante TOP. 436317