Page 1 of 2
CALIBRATION CERTIFICATE
Eas Issued
Sltlas Copco _ tentec Limited Part of the Atias Copco Group
feeritaa rae Ss) Unit F1, innovation drive, Pendeford,
Wolverhampton
West Midlands, WVS 5GA, UK
Certificate No: §-4843 Calibration Date: 30/11/2020 Approved Signatory
Calibration Engineer: lan Watson
igned: “To~ Lugo —— lan Watson
Too! Description
Description: Hydraulic Torque Wrench
Model: RT-25 SQ DR
Serial No: 15/16003.018
Customer
POWER TOOLS DISTRIBUTION N.V (PTD)
INDUSTRIELAAN 40
8.3730 HOESELT
BELGIUM
#32 (0) 88 510 414
Equipment Used
Torque Transducers: TSD 40011 SIN (6722)
Calibrated by Atlas Copco BLM - Accredia
Accreditation - LAT 059
Pressure Transducers: TSD 10KPT RHYD S/N (170393)
Calibrated by CHAMOIS METROLOGY -
UKAS Accreditation - 0822
Display Unit: TSO 6500-2 SIN (20916)
Calibrated by - Atlas Copco BLM - Accredia
Accreditation - LAT 059
Reaction Foot: RA-15/16003-018
Calibration Procedure
Calibration done in accordance with procedure "TCP6 -REVB",
‘Traceability
0 to 40,000 Ib ft Torque transducer
From 10% to 100%: 0.1%
From 0% to 10%: #2 divisions (10 LB-FT)
(0 TO 10000 Psi Pressure transducer
From 10% to 100%: 0.1%
From 0% to 10%: #2 divisions (2 Ps)
‘Max Capacity
Torque - 40,000 Ibf ft
Pressure - 10,000 Psi
jased on standard ISO 6789: 2003
‘All measuring equipment used for calibration purposes is traceable to National or Internationally recognised
standards
‘Test Conditions
‘Temperature: 18.02
Humidity: 48.61
‘The temperature did not fluctuate by more than +/- 1° Celsius during the measurement series
“This cartficate provides traceabiity of mes
urement to the SI system of units andlor to units of measurement realised atthe National
Physical Laboratory or other recognised national metrology institutes. Ths ceriiicate may not be repoduced other than infu, except with
the prior writen eproval of the issuing laboratory.
Intemet wwwtentec.net
Telephone +44 (0)121 624 1980Page 2 0f2
Certificate No: $-4843 Calibration Date: 30/11/2020
Model: RT-25SQ0R
Serial No: 15/16003-018
CALIBRATION CERTIFICATE
2000 | 138 ||1999 |138 |5270.0 |5300.0 (5255.0 [5215.0 |5205.0 [5249.0 | [+/-] 3.00%
16000 | 414 | |5998.8/414 |16000.0 |15990.0 |15960.0 |15935.0 |15840.0 |15945.0| [+/-] 3.00 %
10000) 689 | {9999 (689 |26735.0 |26740.0 |26845.0 |26815.0 |26560.0 |26739.0| [+/-] 3.00 %
2000 | 138 | |1999 138 |7145.2 [7185.8 (7124.8 (7070.6 |7057.0_|7116.7 | [+/-] 3.00%
6000 | 414 | |5998.8/414 |21693.1 |21679.5 |21638.9 |21605.0 |21476.2 |21618.5| [+/-] 3.00%
10000) 689 /9999 |689 (36247. 8 |36254.6 36396.9 |36356.3 [36010.5 |36253.2| [+/-] 3.00%
40,000 =
[as]
ss.000
oe [26739]
«y 25000 ae
g <
z
20,000
&
415,000
10,000
5,000
Internet: wwe tentec.net
aun s000”~~s0o0~”~=~Sooo~”~«OOD*~S~*~«SOO~S*~*«OSS*SC«C S(O
Pressure (PSI)
‘This calibration certitate is valid for 12
‘months from stock despatch date
Stock despatch date
Place of issue.
Signature_
Telephone +44 (0)121 524 1990Tentec Limited
ea unit Ft
Atlas Innovation Drive
Pendeford, Wolverhampton
W9 5GA,
aaa United Kingdom
Telephone +44 (0)121 524 1990
ATLAS COPCO
POWER TOOLS DISTRIBUTION internet: wwww.tentec.net
INDUSTRIELAAN 40 ‘email: bolting@uk.atlascopco.com
B-3730 HOESALT
BELGIUM Customer O/N. 4510427082
‘Our Ret 203101
BE0443676020
Advice Note 30/11/2020
Page 1/1
certificate of conformity & pressure test certificate
Qty Description Part Number
1 Square Drive (9434201025
RT-25
SIN 16/16003-018
EC DECLARATION OF INCORPORATION
Hydraulic Torque Wrench The equipment listed left are intended for assembly with, bolt tensioning hose, bolt tensioners, and
bolt tensioning pumps supplied or approved for use by Tentec Ltd, to constitute machinery covered
by Directive 2006/42/EC. They must not be placed into service until all items have been dectared in
conformity with the provisions of the 2006/42/EC Directive. The following EHSR's sections covered
by annex C of the directive have been complied with, Section 1,3 & 4. Assembly instructions are
provided by Tentec in accordance with Annex VI. A technical document is compiled in accordance
with Annex. VIl of the Directive,
BLOCK NAME DAVID JONES
BLOCK POSITION GENERAL MANAGER i
valor 12 months
sis calraon cei
haat
Tom stock deat awe
gs: Power Toos ostib
pace of sue: Power
socdenaen&ne: A3/o U1 RoRA
swat 3 1g
Feat
We herewith cerity based on pressure testing and dimensional inspection that the items supplied under the above
purchase order are in accorcence with the requirements of the order in particular to
a) The fulfilment of material requirements
5) The fulfiment of the required accuracy to, gauge, tolerances, quelity surface
() The fulfilment of performance
Authorised Signature Honey ch onN Tap. 428382