CROSBY? FIST GRIP® CLIPS
WARNINGS AND APPLICATION
INSTRUCTIONS.
Instructions may eause death or serious Injury.
Read and understand these Instructions before
using clips.
Match the same size clip to the same slze wire rope.
Donat mismatch Cresby eps with othor
manufacturer's clips.
Prepare wire rope and termination only as Instructed.
Do not use with plastic coated wire rope.
Apply first load to test the assembly. This load,
‘should be of equal or greater weight than loads
CROSBY® CLIPS
WARNINGS AND APPLICATION
INSTRUCTIONS
awh
wae
-190 ss-450
(Rec-U-Bolt) ——18 Stallone Sto!)
Fallure 10 read, understand, and follow these
Instructions may cause death or serious Injury.
Read and understand these instructions before
using ellps.
Match the same size clip to the same size wire rope.
Prepare wie rope en temination only as instructed,
Do not use with plate costed wie rope.
Apply frstload totes the assembly. This load
shouldbe of equal or greater weigh than loads
expected in use. Next check and reighten nuts fo
retommended torque (See Tato 1, ts page).