120(60Hz) or 230VAC(±10%) (50 or 60Hz)/switchable 1 Mains and Line Frequency See the label on rear side for correct information
Two of F5.0A, 250V for 230VAC
2 Fuses Two of F10.0A, 250V for 115 VAC
3 Power Consumption 950VA ±10%
4 Protection Class Class 1, Type CF 5 IPX Foot Switch: IPx6 6 Carrier Frequency 400, 482KHz 7 Repeat Frequency 33KHz 8 Low Freq. Leakage Current EN60601-1 [2012] Requirement 9 High Freq. Leakage Current Less than 150mA 10 Operation Conditions 10℃~40℃, 30%~ 85% noncondensing, 700mbar~1060mbar 11 Storage Conditions -10℃~60℃, 30%~ 95% noncondensing, 700mbar~1060mbar -10℃~60℃, 30%~ 95% noncondensing, 700mbar~1060mbar 12 Transportation Conditions Do not drop the unit from higher than 50cm Do not use the hook 13 Installation Conditions 5cm clearance required on each side unit for cooling 14 Cooling 1 fan mounted 15 Recommended Duty Cycle 10 sec ON, 30 sec, OFF(Output for 10 seconds, pause for 30 seconds ) 16 Size (H, W, D) 147mm x 330mm x 417mm 17 Weight About 16Kg Not AP/APG device 18 APG Equipment not suitable for use in the presence of a flammable anesthetic mixture with or with oxygen or nitro oxide 19 Operation Sound Difference in operation sounds between cutting and coagulation. 20 Operation Display Visible difference in operations between cutting and coagulation. 21 Output Setting Displayed in [W] unit from Seven Segment (LED number displayer)
IP Code Operating Torque Number of Contacts Capacity of Contacts Operating Angle Cable Size Mechanical Life Electrical Life Working Temp. Working Humidity Material N.W