You are on page 1of 35

LEARNING PAMANTASAN NG LUNGOD NG MUNTINLUPA

MODULE COLLEGE OF INFORMATION TECHNOLOGY AND


COMPUTER STUDIES
University Road Poblacion Muntinlupa City

QD/CITCS/0__ Course Title: Introduction to Computing / Fundamentals of ICT

Issue No. 0 Revision No. 0 Effectivity Date 07 September 2020 Page No.

Name:
Course and Section:

1|Page
LEARNING PAMANTASAN NG LUNGOD NG MUNTINLUPA
MODULE COLLEGE OF INFORMATION TECHNOLOGY AND
COMPUTER STUDIES
University Road Poblacion Muntinlupa City

QD/CITCS/0__ Course Title: Introduction to Computing / Fundamentals of ICT

Issue No. 0 Revision No. 0 Effectivity Date 07 September 2020 Page No.

I.
I.
W
hat are the uses of these device?

Device Use
Monitor
Mouse
Keyboard
Printer
Scanner
Speaker
System Unit
Barcode Reader
Projector
Web Camera

2|Page
LEARNING PAMANTASAN NG LUNGOD NG MUNTINLUPA
MODULE COLLEGE OF INFORMATION TECHNOLOGY AND
COMPUTER STUDIES
University Road Poblacion Muntinlupa City

QD/CITCS/0__ Course Title: Introduction to Computing / Fundamentals of ICT

Issue No. 0 Revision No. 0 Effectivity Date 07 September 2020 Page No.

II.
Answer the question based on your knowledge and experience.

1. What is software? Can you give five example of software you have already use.

2. What is hardware? Can you give five example of computer hardware you have already
use.

3. What do you think is the difference between input and output devices?

4. In your opinion, why is it important to learn and understand information technology and
the internet?

Quiz #1 A
1. The speaker, mouse monitor keyboard is:
a. Hardware
b. Output device
c. Storage device
d. Software
2. Programs that coordinate computer resources, provide an interface, and run application
are also known as:
a. Application program
b. Operating system
c. Storage system
d. Utility program
3. It is the most important part of the information system
a. Software
b. People
c. Hardware

3|Page
LEARNING PAMANTASAN NG LUNGOD NG MUNTINLUPA
MODULE COLLEGE OF INFORMATION TECHNOLOGY AND
COMPUTER STUDIES
University Road Poblacion Muntinlupa City

QD/CITCS/0__ Course Title: Introduction to Computing / Fundamentals of ICT

Issue No. 0 Revision No. 0 Effectivity Date 07 September 2020 Page No.
d. Laptop
4. It is not as powerful as a supercomputer but this type of computer is capable of great
processing speeds and data storage.
a. Mainframe
b. Midrange
c. Laptop
d. Tablet
5. Smartwatch is what type of computer?
a. Laptop
b. Smartphone
c. Tablet
d. Wearable
6. RAM means:
a. Random Access Memory
b. Random Application Memory
c. Ready Access Memory
d. Ready Application Memory
7. Even after electric power to the computer system has been turned off, this type storage
holds data and programs.
a. RAM
b. Secondary Storage
c. Memory
d. None of the above.
8. This type of file was created using word processors.
a. Database
b. Document
c. Presentation
d. Worksheet
9. The most commonly used personal computer
a. Wearable computer
b. Desktop computer
c. Smartphone
d. Tablet computer
10. The largest network in the world is the:
a. Facebook
b. Internet
c. Supercomputer
d. Web

4|Page
LEARNING PAMANTASAN NG LUNGOD NG MUNTINLUPA
MODULE COLLEGE OF INFORMATION TECHNOLOGY AND
COMPUTER STUDIES
University Road Poblacion Muntinlupa City

QD/CITCS/0__ Course Title: Introduction to Computing / Fundamentals of ICT

Issue No. 0 Revision No. 0 Effectivity Date 07 September 2020 Page No.

Quiz #1 B
1. Program
2. Software
3. Software system
4. Desktop
5. System unit
6. Output
7. Solid state
8. Modem
9. Presentation
10. Network

5|Page
LEARNING PAMANTASAN NG LUNGOD NG MUNTINLUPA
MODULE COLLEGE OF INFORMATION TECHNOLOGY AND
COMPUTER STUDIES
University Road Poblacion Muntinlupa City

QD/CITCS/0__ Course Title: Introduction to Computing / Fundamentals of ICT

Issue No. 0 Revision No. 0 Effectivity Date 07 September 2020 Page No.

Name:
Course and Section:

6|Page
LEARNING PAMANTASAN NG LUNGOD NG MUNTINLUPA
MODULE COLLEGE OF INFORMATION TECHNOLOGY AND
COMPUTER STUDIES
University Road Poblacion Muntinlupa City

QD/CITCS/0__ Course Title: Introduction to Computing / Fundamentals of ICT

Issue No. 0 Revision No. 0 Effectivity Date 07 September 2020 Page No.

7|Page
LEARNING PAMANTASAN NG LUNGOD NG MUNTINLUPA
MODULE COLLEGE OF INFORMATION TECHNOLOGY AND
COMPUTER STUDIES
University Road Poblacion Muntinlupa City

QD/CITCS/0__ Course Title: Introduction to Computing / Fundamentals of ICT

Issue No. 0 Revision No. 0 Effectivity Date 07 September 2020 Page No.
I. Answer the question based on your knowledge and experience.

1. How can you describe the internet?

2. On a day to day basis, how many hours did you spend online your time
online?

3. Commonly, what are you doing when you are using the internet?

4. Do you find using the internet convenient when it comes to communication?

5. What is your best experience while you are online?

6. What are the common problems you are facing when you are online?

8|Page
LEARNING PAMANTASAN NG LUNGOD NG MUNTINLUPA
MODULE COLLEGE OF INFORMATION TECHNOLOGY AND
COMPUTER STUDIES
University Road Poblacion Muntinlupa City

QD/CITCS/0__ Course Title: Introduction to Computing / Fundamentals of ICT

Issue No. 0 Revision No. 0 Effectivity Date 07 September 2020 Page No.
E-Commerce: When given a chance to build a business online, what
business is it and why? On the box below, can you draw a logo of your
business?

I. Multiple choice
1. The collection of networks that links millions of organizations like businesses,
government agencies, educational institutions, and individuals
a. Internet
b. Browser
c. Webpage

9|Page
LEARNING PAMANTASAN NG LUNGOD NG MUNTINLUPA
MODULE COLLEGE OF INFORMATION TECHNOLOGY AND
COMPUTER STUDIES
University Road Poblacion Muntinlupa City

QD/CITCS/0__ Course Title: Introduction to Computing / Fundamentals of ICT

Issue No. 0 Revision No. 0 Effectivity Date 07 September 2020 Page No.
d. Website

2. The first workable prototype of the Internet came in the year

a. Late 1980’s
b. Late 1960’s
c. Late 1970’s
d. Late 2000’s

3. Consist of a worldwide collection of electronic webpages.


a. Monitor
b. Webpage
c. World Wide Web
d. Webinar

4. Which web generation has many users that can view and read information over the web
but a few people can create web content.
a. Web 1.0
b. Web 2.0
c. We3.0
d. Web 4.0

5. It is physical network, composed of wires, cables, and satellites.


a. Web
b. Website
c. Webpage
d. Internet

6. Which of the following Internet activities is the most popular?


a. Searching
b. Education
c. Communication
d. Shopping

7. Is a business that provides individuals and organizations access to the internet free or for
free

10 | P a g e
LEARNING PAMANTASAN NG LUNGOD NG MUNTINLUPA
MODULE COLLEGE OF INFORMATION TECHNOLOGY AND
COMPUTER STUDIES
University Road Poblacion Muntinlupa City

QD/CITCS/0__ Course Title: Introduction to Computing / Fundamentals of ICT

Issue No. 0 Revision No. 0 Effectivity Date 07 September 2020 Page No.
a. ISP
b. Browser
c. Safari
d. WIFI

8. Which of these is not a browser?


a. Safari
b. Nokia
c. Google Chrome
d. Mozilla Firefox

9. The unique address or location of a webpage is called.


a. URL
b. UMID
c. UBC
d. URLIO

10. Then rules for exchanging data between computers


a. Protocol
b. System
c. Path
d. Hostname

II. Answer the question or statement


1. Discuss the internet and web

2. What is the difference between the internet and web?

11 | P a g e
LEARNING PAMANTASAN NG LUNGOD NG MUNTINLUPA
MODULE COLLEGE OF INFORMATION TECHNOLOGY AND
COMPUTER STUDIES
University Road Poblacion Muntinlupa City

QD/CITCS/0__ Course Title: Introduction to Computing / Fundamentals of ICT

Issue No. 0 Revision No. 0 Effectivity Date 07 September 2020 Page No.

3. What is the difference between the 3 generations of the web?

4. Define the E-Commerce

5. How can you explain the 3 types of E-Commerce?

12 | P a g e
LEARNING PAMANTASAN NG LUNGOD NG MUNTINLUPA
MODULE COLLEGE OF INFORMATION TECHNOLOGY AND
COMPUTER STUDIES
University Road Poblacion Muntinlupa City

QD/CITCS/0__ Course Title: Introduction to Computing / Fundamentals of ICT

Issue No. 0 Revision No. 0 Effectivity Date 07 September 2020 Page No.

Name:
Course and Section:

13 | P a g e
LEARNING PAMANTASAN NG LUNGOD NG MUNTINLUPA
MODULE COLLEGE OF INFORMATION TECHNOLOGY AND
COMPUTER STUDIES
University Road Poblacion Muntinlupa City

QD/CITCS/0__ Course Title: Introduction to Computing / Fundamentals of ICT

Issue No. 0 Revision No. 0 Effectivity Date 07 September 2020 Page No.
I. Answer the question based on your knowledge and experience.

1. Have you tried using Microsoft words keys? Can you list some of those?

2. Do you remember using some application software? What are those?

3. What is your favorite application that is currently installed on your


smartphone?

4. Have you tried creating documents/presentations/ spreadsheets for school


purposes? How was your experience?

5. When given a chance to create your mobile application what would it be and
how can you describe this application?

I. Encircle the correct answer.


1. It consists of program designed to make users more productive to help them
with personal tasks.
a. Application
b. Application software
c. Software
d. Mobile phone

14 | P a g e
LEARNING PAMANTASAN NG LUNGOD NG MUNTINLUPA
MODULE COLLEGE OF INFORMATION TECHNOLOGY AND
COMPUTER STUDIES
University Road Poblacion Muntinlupa City

QD/CITCS/0__ Course Title: Introduction to Computing / Fundamentals of ICT

Issue No. 0 Revision No. 0 Effectivity Date 07 September 2020 Page No.
2. The most widely used software tools that allow users to create and manipulate
documents.
a. Word processor
b. Spreadsheet
c. Presentation
d. Database

3. Allows user to organize data in rows and columns and perform calculations.
a. Word processor
b. Spreadsheet
c. Presentation
d. Database

4. Allows user to create visual aids for presentations to communicate ideas,


messages, and other information to the group.
a. Word processor
b. Spreadsheet
c. Presentation
d. Database

5. Allows user to create, access, and manage a database


a. Word processor
b. Spreadsheet
c. Presentation
d. Database

6. This type of application is used by a specific profession.


a. Specialize application
b. General-purpose application
c. Professional software
d. Mobile application

15 | P a g e
LEARNING PAMANTASAN NG LUNGOD NG MUNTINLUPA
MODULE COLLEGE OF INFORMATION TECHNOLOGY AND
COMPUTER STUDIES
University Road Poblacion Muntinlupa City

QD/CITCS/0__ Course Title: Introduction to Computing / Fundamentals of ICT

Issue No. 0 Revision No. 0 Effectivity Date 07 September 2020 Page No.
7. Designed for creating visual communications such as brochures, business
cards, greeting cards, web pages, posters, textbooks, newsletter, newspaper,
and many more.
a. Image editing program
b. Video editing program
c. Desktop publishing program
d. Illustration program

8. Also known as a drawing program


a. Image editing program
b. Video editing program
c. Desktop publishing program
d. Illustration program

9. A program capable of editing, modifying, generating, or manipulating a video


or a movie file.
a. Image editing program
b. Video editing program
c. Desktop publishing program
d. Illustration program

10. Used to manipulate or to enhance digital images.


a. Image editing program
b. Video editing program
c. Desktop publishing program
Illustration program

I. Write DPP If a program is a Desktop Publishing Program, write IE If


it is an image editor, IP if it is an Illustration Program, VE If it is a

16 | P a g e
LEARNING PAMANTASAN NG LUNGOD NG MUNTINLUPA
MODULE COLLEGE OF INFORMATION TECHNOLOGY AND
COMPUTER STUDIES
University Road Poblacion Muntinlupa City

QD/CITCS/0__ Course Title: Introduction to Computing / Fundamentals of ICT

Issue No. 0 Revision No. 0 Effectivity Date 07 September 2020 Page No.
Video Editing Program or VG if the program is for video game
designing.

1. Unreal game engine


2. Adobe Premiere
3. Cry Engine SDK
4. Unity development kit
5. Corel DRAW
6. Apple iMovie
7. Ink scape
8. Fireworks
9. Adobe Photoshop
10. Microsoft’s Story remix
11. Microsoft’s Publisher
12. Pixelmator
13. Quark Express
14. GIMP
15. Adobe Photoshop

Name:

17 | P a g e
LEARNING PAMANTASAN NG LUNGOD NG MUNTINLUPA
MODULE COLLEGE OF INFORMATION TECHNOLOGY AND
COMPUTER STUDIES
University Road Poblacion Muntinlupa City

QD/CITCS/0__ Course Title: Introduction to Computing / Fundamentals of ICT

Issue No. 0 Revision No. 0 Effectivity Date 07 September 2020 Page No.
Course and Section:

18 | P a g e
LEARNING PAMANTASAN NG LUNGOD NG MUNTINLUPA
MODULE COLLEGE OF INFORMATION TECHNOLOGY AND
COMPUTER STUDIES
University Road Poblacion Muntinlupa City

QD/CITCS/0__ Course Title: Introduction to Computing / Fundamentals of ICT

Issue No. 0 Revision No. 0 Effectivity Date 07 September 2020 Page No.

19 | P a g e
LEARNING PAMANTASAN NG LUNGOD NG MUNTINLUPA
MODULE COLLEGE OF INFORMATION TECHNOLOGY AND
COMPUTER STUDIES
University Road Poblacion Muntinlupa City

QD/CITCS/0__ Course Title: Introduction to Computing / Fundamentals of ICT

Issue No. 0 Revision No. 0 Effectivity Date 07 September 2020 Page No.

1. Have you been in a situation where you have inserted your flash drive in another
person’s computer and once you have inserted it back to your computer, your flash
drive created shortcut?

2. What do you think will happen if your computer has no antivirus program installed?

3. Do you back up your files especially the most important one?


.

4. Do you personally think you have to install an antivirus on your computer?

5. Do you find virtual assistants helpful?

20 | P a g e
LEARNING PAMANTASAN NG LUNGOD NG MUNTINLUPA
MODULE COLLEGE OF INFORMATION TECHNOLOGY AND
COMPUTER STUDIES
University Road Poblacion Muntinlupa City

QD/CITCS/0__ Course Title: Introduction to Computing / Fundamentals of ICT

Issue No. 0 Revision No. 0 Effectivity Date 07 September 2020 Page No.

I. Circle the correct answer.

1. Type of computer program that is designed to run a computer’s hardware and


application programs.
a. Application Software
b. System Software
c. General Purpose Application
d. Specialized application

2. There are 3 main functions of the operating system. Which is not included?
a. Managing resources
b. Running application
c. Booting
d. Providing user interface

3. Graphic representation for a program, file, or function.


a. Icon
b. Windows
c. Help
d. Pointer

4. A list of option or commands presented to the user of a computer or


communication system.
a. Icon
b. Menu
c. Help
d. Pointer

21 | P a g e
LEARNING PAMANTASAN NG LUNGOD NG MUNTINLUPA
MODULE COLLEGE OF INFORMATION TECHNOLOGY AND
COMPUTER STUDIES
University Road Poblacion Muntinlupa City

QD/CITCS/0__ Course Title: Introduction to Computing / Fundamentals of ICT

Issue No. 0 Revision No. 0 Effectivity Date 07 September 2020 Page No.
5. Provides assistance for application functions and procedures
a. Icon
b. Menu
c. Help
d. Pointer

6. An operating system typically designed for a specific application. It is usually


used for hardware that has very little computing power.
a. Embedded operating system
b. Stand-alone operating system
c. Network operating system
d. Desktop operating system

7. Also called a desktop operating system


a. Embedded operating system
b. Stand-alone operating system
c. Network operating system
d. Desktop operating system

8. Specialized programs designed to make computing easier and safe.


a. Utility programs
b. Operating system
c. Desktop operating system
d. Mobile operating system

9. It recognizes and corrects problems faced while using the computer


a. Back up programs
b. File compression program
c. Antivirus
d. Troubleshooting or diagnostic programs

22 | P a g e
LEARNING PAMANTASAN NG LUNGOD NG MUNTINLUPA
MODULE COLLEGE OF INFORMATION TECHNOLOGY AND
COMPUTER STUDIES
University Road Poblacion Muntinlupa City

QD/CITCS/0__ Course Title: Introduction to Computing / Fundamentals of ICT

Issue No. 0 Revision No. 0 Effectivity Date 07 September 2020 Page No.
10. Allow you to take many files and compress them into one file to use less disk
space
a. Back up programs
b. File compression program
c. Antivirus
d. Troubleshooting or diagnostic programs

23 | P a g e
LEARNING PAMANTASAN NG LUNGOD NG MUNTINLUPA
MODULE COLLEGE OF INFORMATION TECHNOLOGY AND
COMPUTER STUDIES
University Road Poblacion Muntinlupa City

QD/CITCS/0__ Course Title: Introduction to Computing / Fundamentals of ICT

Issue No. 0 Revision No. 0 Effectivity Date 07 September 2020 Page No.

II. Name each part and explains it functions. Put your answer in the table located on the next
page.

24 | P a g e
LEARNING PAMANTASAN NG LUNGOD NG MUNTINLUPA
MODULE COLLEGE OF INFORMATION TECHNOLOGY AND
COMPUTER STUDIES
University Road Poblacion Muntinlupa City

QD/CITCS/0__ Course Title: Introduction to Computing / Fundamentals of ICT

Issue No. 0 Revision No. 0 Effectivity Date 07 September 2020 Page No.

Name Function
1. 

2.  .

3.  .

4. 

5. 

6. 

7. 

25 | P a g e
LEARNING PAMANTASAN NG LUNGOD NG MUNTINLUPA
MODULE COLLEGE OF INFORMATION TECHNOLOGY AND
COMPUTER STUDIES
University Road Poblacion Muntinlupa City

QD/CITCS/0__ Course Title: Introduction to Computing / Fundamentals of ICT

Issue No. 0 Revision No. 0 Effectivity Date 07 September 2020 Page No.

Name:
Course and Section:

26 | P a g e
LEARNING PAMANTASAN NG LUNGOD NG MUNTINLUPA
MODULE COLLEGE OF INFORMATION TECHNOLOGY AND
COMPUTER STUDIES
University Road Poblacion Muntinlupa City

QD/CITCS/0__ Course Title: Introduction to Computing / Fundamentals of ICT

Issue No. 0 Revision No. 0 Effectivity Date 07 September 2020 Page No.
I. Answer the following questions

1. Have you ever been in a situation when you are using a computer but it suddenly
turns off? What do you thin happen? And how did you solve it?

2. Have you ever experience playing on your computer but it is responding very
slow? What do you think is the problem?

3. Have you seen a smartphone charging in a wireless platform? If yes, how does it
look like?

4. Have you seen the components inside a system unit?

5. Are you familiar with the cables inside a computer’s system unit?

I.
Circle the correct answer.

1. A system unit is also called or known as


a. System Chassis
b. System Oasis
c. System Cheers

27 | P a g e
LEARNING PAMANTASAN NG LUNGOD NG MUNTINLUPA
MODULE COLLEGE OF INFORMATION TECHNOLOGY AND
COMPUTER STUDIES
University Road Poblacion Muntinlupa City

QD/CITCS/0__ Course Title: Introduction to Computing / Fundamentals of ICT

Issue No. 0 Revision No. 0 Effectivity Date 07 September 2020 Page No.
d. Sytem Building

2. Where’s the desktop computer’s system unit is typically located?


a. Separate tower
b. Inside the mouse
c. Back of the screen
d. Under its keyboard

3. Another name for the motherboard


a. Blackboard
b. System board
c. Green Board
d. Laptop Board

4. Provide pathways to support communication among the various electronic


components
a. Bus line
b. Slots
c. Expansion card
d. Sockets

5. Known as the brain of the computer


a. Slot
b. Sockets
c. Microprocessor
d. Bus line

6. Used to connect a computer to a network


a. Graphic card
b. Network Interface card
c. RAM
d. ROM
7. It tells the computer’s memory, arithmetic\logic unit, and input and output
devices on how to respond to a program’s instructions.
a. Control Unit
b. HDMI
c. USB
d. Arithmetic- Logic Unit

28 | P a g e
LEARNING PAMANTASAN NG LUNGOD NG MUNTINLUPA
MODULE COLLEGE OF INFORMATION TECHNOLOGY AND
COMPUTER STUDIES
University Road Poblacion Muntinlupa City

QD/CITCS/0__ Course Title: Introduction to Computing / Fundamentals of ICT

Issue No. 0 Revision No. 0 Effectivity Date 07 September 2020 Page No.
8. A component of a computer’s central processing unit (CPU) that directs the
operation of the processor
a. Control Unit
b. HDMI
c. USB
d. Arithmetic- Logic Unit
9. It is a device capable of a storing information, data, and instructions
a. memory
b. ports
c. system board
d. expansion card
10. Is a type of display adapter or video card installed in a computer to display
graphical data with high clarity, color, definition and overall appearance?
a. Graphic card
b. Network Interface card
c. Wireless Network card
d. Memory card

II. Choose the answer from the box below

VGA Virtual Memory Flash Memory


PCI Express Universal Series Bus MiniDP
MIDI Fire wire bus ROM
Cache Memory Power Supply System Unit

29 | P a g e
LEARNING PAMANTASAN NG LUNGOD NG MUNTINLUPA
MODULE COLLEGE OF INFORMATION TECHNOLOGY AND
COMPUTER STUDIES
University Road Poblacion Muntinlupa City

QD/CITCS/0__ Course Title: Introduction to Computing / Fundamentals of ICT

Issue No. 0 Revision No. 0 Effectivity Date 07 September 2020 Page No.
1. Used for connecting analog and digital monitors
2. A port that an audio-visual device typically used to connect large monitors.
3. Used for digital music
4. Provides a single dedicated path for each connected device
5. It is a combination of RAM and ROM
6. Refers to computer memory chips containing permanent or semi-permanent data
7. Large programs are divided into parts and the parts are stored in a secondary device; each part
is then read in RAM only when needed
8. Improves processing by acting as temporary high-speed holding area between the memory and
the CPU
9. Used to connect one USB device to another or a common point and then onto the system
board
10. Like USB but more specialized, used primarily to connect audio and video equipment to the
system board

Name:

30 | P a g e
LEARNING PAMANTASAN NG LUNGOD NG MUNTINLUPA
MODULE COLLEGE OF INFORMATION TECHNOLOGY AND
COMPUTER STUDIES
University Road Poblacion Muntinlupa City

QD/CITCS/0__ Course Title: Introduction to Computing / Fundamentals of ICT

Issue No. 0 Revision No. 0 Effectivity Date 07 September 2020 Page No.
Course and Section:

31 | P a g e
LEARNING PAMANTASAN NG LUNGOD NG MUNTINLUPA
MODULE COLLEGE OF INFORMATION TECHNOLOGY AND
COMPUTER STUDIES
University Road Poblacion Muntinlupa City

QD/CITCS/0__ Course Title: Introduction to Computing / Fundamentals of ICT

Issue No. 0 Revision No. 0 Effectivity Date 07 September 2020 Page No.
I. Answer the question based on your knowledge

1. What is an input device?

2. What is an output device?

3. Commonly, what input device have you used?

4. What output device have you used?

5. Are you familiar with Virtual Reality? How would you explain this?

I.

Circle the correct answer.

32 | P a g e
LEARNING PAMANTASAN NG LUNGOD NG MUNTINLUPA
MODULE COLLEGE OF INFORMATION TECHNOLOGY AND
COMPUTER STUDIES
University Road Poblacion Muntinlupa City

QD/CITCS/0__ Course Title: Introduction to Computing / Fundamentals of ICT

Issue No. 0 Revision No. 0 Effectivity Date 07 September 2020 Page No.

1. Converts what understand into what the system unit can process
a. Input
b. Output
c. Input and output
d. None of the above
2. You can point at manipulate any object or text on the screen
a. Monitor
b. Pointing device
c. Printer
d. Scanning device
3. A device that captures images and text (photographic, prints posters, magazine pages) to
convert into form that the system can process
a. Monitor
b. Pointing device
c. Printer
d. Scanning device
4. A device used to gather information and RFID tags
a. Optical scanner
b. RFID
c. Card reader
d. Bar code reader
5. A reader device that interprets encoded information of variety of card
a. Optical scanner
b. RFID
c. Card reader
d. Bar code reader
6. A reader that recognizes special character and marks
a. Character and mark recognition devices
b. Optical scanner
c. Card reader
d. Barcode reader
7. That process the capturing of images and storming them on a computer or mobile
device’s storage medium.
a. Image capturing device
b. Pointing device
c. Audio-input device
d. Scanning device

33 | P a g e
LEARNING PAMANTASAN NG LUNGOD NG MUNTINLUPA
MODULE COLLEGE OF INFORMATION TECHNOLOGY AND
COMPUTER STUDIES
University Road Poblacion Muntinlupa City

QD/CITCS/0__ Course Title: Introduction to Computing / Fundamentals of ICT

Issue No. 0 Revision No. 0 Effectivity Date 07 September 2020 Page No.
8. Is the device that processes the entering of any sound into the computer such as speech,
music, and sound effects.
a. Image capturing device
b. Pointing device
c. Audio-input device
d. Scanning device
9. Produces text and graphics on a physical medium (paper)
a. Earphones
b. Scanner
c. Mouse
d. Printer
10. Translates audio information from the computer into sounds that people can understand
a. Audio-output device
b. Audio-input device
c. Scanning device
d. Image capturing device

34 | P a g e
LEARNING PAMANTASAN NG LUNGOD NG MUNTINLUPA
MODULE COLLEGE OF INFORMATION TECHNOLOGY AND
COMPUTER STUDIES
University Road Poblacion Muntinlupa City

QD/CITCS/0__ Course Title: Introduction to Computing / Fundamentals of ICT

Issue No. 0 Revision No. 0 Effectivity Date 07 September 2020 Page No.
II. Write I if it is an input device, write O if it is an output device and write C if it is
combination of input and output device.

1. Printer
2. Scanner
3. Microphone
4. Speaker
5. VR
6. Keyboard
7. Touchpad
8. Web camera
9. Barcode scanner
10. Multifunctional device
11. Mouse
12. Headphone with microphone
13. E-book reader
14. Joysticks
15. Monitor

35 | P a g e

You might also like