TDI
TURBOTWIN™
Model T25
Model T25
TURBOTWIN™
Engine Air Starters
Suitable for starting diesel models up to 15 liters (900 CID).
Engine applications include MTU BR1600, MAN D26/D28, Scania D16 and Volvo
pie
"Configured with the same rugged turbine motor design used in the complete line of
CONTAMINATED TurBoTWwi starters.
EV any = The TursoTwiv motor is highly resistant to damage caused by wet or hard
contaminated drive air/gas.
= The integrated relay valve eliminates the need for lengthy pre-engagement lines
Seeing simplifying installation and reducing costs.
= Features modular construction with serviceable parts providing users with simple
and low cost overhaul.
SEAN
"
From TECH DEVELOPMENT
6800 Poe Avenue «Dayton, OH 45413
Tel: 937-898-9600 eFax: 937-898-8431eS * Efficient twin turbine motor delivers more torque using less air/gas than previous
CONSUMPTION starter designs.
+ Standard pressure (6 nozzle) and low pressure (12 nozzle) versions available.
ROM wes * Maintenance free design with grease-packed bearings for the life of the starter.
PES + No.extemal lubrication required as there are no rubbing parts.
Ven gy == Eliminates lubricator problems, installation expense, system maintenance, and the
aaa messy/hazardous oil film around the starter exhaust.
Constructed from durable, corrosion resistant, and high quality materials.
Pain
fi it ‘Major components are made from high strength aluminum or steel alloy.
CONSTRUCTION
Lightweight at only 26 Ibs. (12 Kg)...the 725 is capable of delivering over 20 HP (15
CON elas kW) at only 150 psig (10 BAR).
OPERATION = Pressure ranges from 30 psig (2 BAR) to 150 psig (10 BAR).
= Compressed air and natural gas compatible.
The high horsepower of the turbine air motor combined with a planetary gear
speed reducer results in a very efficient and reliable unit.
Powered by a pair of axial flow turbines coupled to a planetary gear reduction set.
Foie ONY elas
Css yuo)
= Tech Development introduced the first turbine technology for starting industrial
engines in 1979.
pe ae + Features an Innovative and more reliable turbine motor than anything on the
market today.
"= The Turso7 WN 725 is the result of TD's continuing turbine starter design
innovations.
Use 1” Min Hose Or pipe
/p Pressure Regulator
2-29384-1x
a4
Lgl
| yy Control Lines
( Main Air Supply
_- Mounting Flange
To Interlock
‘system
From TECH DEVELOPMENTDIMENSIONAL DATA.
TDITursoTwn SRE Se
| T25 —
|
| east
| 1° NPT, 4 1/2"NPT
‘OR
713"
1S0 228 G 1 1/4" (BSPP)
et
—— 928" — =|
~ Relay Valve
sembly
Riva 2649-001
/— Hirschman Type
Connector
12v0C
“= Mounting Surface
o =
SAE 3&2 Flange —/
PIN 229401 8-001 15°
Position indicator Hole
Left Hand-cow
Right Hand-ow
Shaft Rotation <
SAE 3 Flange —/
PIN 2.29401-003,
Position Indicator Hole
From TECH DEVELOPMENT‘TORQUE Model T25 Performance Curve POWER
NM LB-FT lozzi Compressed Air, 10.25:1 Gear Ratio ey
169.8 128 = 5 25 18,
ene fait Flow Fiow |
pressure (SCFM) Nmno/t)
150 Psig 512 870 |
120 Psig = 412 oo |)
138.6100 some 208 HH a sas
0 me |
017 75 1s 112
sone
ore 50 10 78
339 25 537
oo oo
os wo i 2 2% % 3 40 45 90 55
Pinion Speed (RPM /100)
‘TORQUE Model T25 Performance Curves POWER
NM LB-FT 12 Nozzles, C ssed Air 10. ae
200.4 150 = a0 22.4
Flow —Fiow
=a ell
sore ‘Ser 590
eo Psig = 40080
169.8 128 Sores $82 S88 |] 2s 10.7
138.6 100 20 149
wou 75 is 112
wo 28
33.9 25 5 a7
oo
38
From TECH DEVELOPMENT
10
35
Pinion Speed (RPM /100)