Professional Documents
Culture Documents
ACTIVITY NO 5
Subject: Mechanics of Deformable Bodies Prepared by: Engr. Roner Abanil, REE
Instruction! Get Clean Sheet of Paper answer the following problems. Take A picture of your solution
and sent it to Google Class Room.
Problem no. 1
A steel tire, 10 mm thick, 80 mm wide, and 1500.0 mm inside diameter, is heated and shrunk onto a
steel wheel 1500.5 mm in diameter. If the coefficient of static friction is 0.30, what torque is required to
twist the tire relative to the wheel? Neglect the deformation of the wheel. Use E = 200 GPa.
Problem no. 2
The rigid bar ABC shown in Fig. P-212 is hinged at A and supported by a steel rod at B. Determine the
largest load P that can be applied at C if the stress in the steel rod is limited to 30 ksi and the vertical
movement of end C must not exceed 0.10 in.
Republic of the Philippines
CAMARINES SUR POLYTECHNIC COLLEGES
Nabua, Camarines Sur
Problem no. 3
The rigid bars AB and CD shown in Fig. P-214 are supported by pins at A and C and the two rods.
Determine the maximum force P that can be applied as shown if its vertical movement is limited to 5
mm. Neglect the weights of all members.