Professional Documents
Culture Documents
Fane Colossus 18xb Ds141117
Fane Colossus 18xb Ds141117
COLOSSUS 18XB
SUB BASS DRIVER
mm
5
+ High BL factor, 25.9 T/m.
48
/
”
+ Dual ‘spaced’ suspension system and advanced materials offers ultra-linearity,
.1
19
mechanical stability and superior acoustic performance at high levels of excursion.
18” / 457 mm
9.21” /
+ Ribbed, fibre loaded, UK manufactured cone offers increased strength, durability and
234 mm
resistance to deformation under extreme loads.
+ Designed for optimum use in 100-250 Litre ported enclosure designs.
+ 4-Inch Inside/ outside windings copper voice coil.
GENERAL SPECIFICATIONS TECHNICAL & THIELE SMALL PARAMETERS MOUNTING / SHIPPING INFORMATION
COLOSSUS 18XB | SUB BASS DRIVER
Voice Coil Diameter 4” / 101.6 mm Effective Piston Diameter 15.03” / 381.76 mm Packing Carton
(W) 512 (D) 512 (H) 244
Dimensions (mm)
Straight Poly-cellulose 3.53 - 8.82 ft3 / 125 -
Cone/ Dust Dome Material Rec. Enclosure Volume
Ribbed / Paper 400 Litres
Surround / Edge Polyvinyl Damped Multi
Termination Roll. Poly Cotton
50
+100
+90 20
+80 10
5
+70
+60
2
Hz Hz
+50 1
20 50 100 200 500 1k 2k 5k 10k 20k 20 50 100 200 500 1k 2k 5k 10k 20k
(1) Please enquire about alternative impedances. (3) Half space response measured in a 975 Litre sealed box. Blue line = fundamental 45° off-axis. Please note that
(2) A.E.S. power handling test. Pink noise bandpass filtered at 12 dB per octave with cutoff frequencies of 30 Hz and the frequency response measurements are supplied for comparison only and are not a measure of the low
300 Hz. Driver mounted in free air, test signal applied at rated power for two hours. frequency performance which may be achieved in a fully optimised system.
(4) Positive voltage at red terminal causes forward motion of cone.
© 2017, Fane International Ltd. We operate a policy of continuous research and development and as such published specifications are subject to change without notice. www.fane-international.com 141117