Professional Documents
Culture Documents
Tools:
88830163 Lifting tool
11668007 Standard Jack Single
11668010 Wheel forklift
Shackle
Sling, 2 m (6.6 ft)
1. Remove the wheel according to Wheel, removing and installing.
2. Drain the oil from the axle.
Capacity, see: Front axle, capacity.
3. Mark the position of the hub reduction gear relative to the axle housing.
Connect the lifting tool to the hub reduction gear. Remove the retaining bolts and the hub reduction gear.
Weight of the hub reduction gear approx.: 190 kg (419 lb)
NOTE! In certain cases, the half shaft and brake disc may remain in the hub reduction gear.
Figure 1
1. 88830163 Lifting tool
Hub reduction, installing
1. Install the O-ring on the axle housing.
Install the brake disc.
Check the springs.
Figure 1
1. Brake disc
2. O-ring
3. Sun gear
4. Spring
2. Install the brake plate and guide pins.
Figure 2
1. Brake plate
2. Guide pins
3. Connect the lifting tool to the hub reduction gear and install it.
Weight of the hub reduction gear approx.: 190 kg (419 lb)
NOTE!
Install according to markings and check that the guide pins in the hub reduction gear engage with the
recesses in the brake piston.
NOTE!
Sun gear, half shaft and brake disc may also be located in the hub reduction gear before installing on the
axle.
Figure 3
Figure 5
Figure 1