Professional Documents
Culture Documents
5F2 ALPHA
=============================
www.liveforspeed.net - www.liveforspeed.com
Important :
-----------
This is Live for Speed S2 ALPHA.
By installing this software you agree that you do so at at your own risk
and you accept full responsibility for any damage caused by the use or
installation of the software.
The producers of the Live for Speed racing simulator make every effort
to ensure the program is safe but can not accept any responsibility
whatsoever for personal injury or death that may arise during the use
of the software, or any damage of any kind to your system including
corrupted files, lost data or damage to hardware.
Installation :
--------------
To install LFS S2, unzip the file into a suitable folder on your
hard drive. You must ensure that the directory structure is preserved
by using the appropriate option in your unzip utility. You will know
that it has been correctly unzipped if you see a data folder beside the
LFS.exe program and some more folders inside the data folder.
To run LFS S2 :
---------------
Double-click the program file LFS.exe
Force Feedback :
1) You can turn on or off Force Feedback with the on-screen switch
2) If you have more than one FF device you can select the required one
1) Host options :
Example :
2) Guest options :
lfs=0.5F :version
status=ingame :offline / online / ingame
guests=4 :current number of guests
maxguests=4 :maximum guests allowed
host=Host Name :game name as listed on master server
pass=Optional Pass :host password
usemaster=yes :no / yes / hidden
trackcfg=BL1 :short name for track and config
cars=[18x"0"or"1"] :cars allowed on host (0=no / 1=yes)
qual=0 :qualifying minutes
laps=5 :number of laps
conn=Host :player name
conn=Guest 1 :player name
conn=Guest 2 :player name
...
Host commands :
---------------
You can use text commands to control normal or nogfx dedicated hosts.
These commands are also available to any user who has connected to the
host using the admin password if one was specified when the host was
started.
Any time :
Car Strings :
-------------
The /cars command for the startup command line or for hosts / admins
now uses the three-letter car codes introduced for S2.
Example :
The plus and minus symbols can be used in conjuction with these :
- USER information :
Press ESC while viewing the car in a replay, on the lap BEFORE the
lap you wish to analyse. Click on "Output lap data" and enter the
name of the output file. This file will be saved in a "raf" folder.
Use an external application to open the .raf files (not supplied).
The file will be created when the car crosses the start line and
will be closed when the car crosses it again 1 lap later.
Translation :
-------------
To create a language pack :
- Reload the language file any time with SHIFT+F5, for convenience.
- The help.txt file can also be edited, in the data\misc folder, copy
the file help.txt to a new file help_XXX.txt (where XXX.txt is the
name of your language file).
Thanks :
--------
Thanks to all hosts and racers for your support.
Copyright :
-----------
(c) 2002-2005 Scawen Roberts - Eric Bailey - Victor van Vlaardingen