Professional Documents
Culture Documents
Heidenhain
General Information
Machine mode MILL
Machine type 5_axis_dual_table
Controller name Heidenhain
Home position Metric/Inch: X=0/0 Y=0/0 Z=500/19,685
Unit PART
Controller Capabilities
Plane output supported ALL
TCPM output supported ALL
Polar mode supported OFF
Unrestricted
Heidenhain iTNC530 Dualtable AC
Heidenhain
Kinematics Setting
Arc Output Mode QUADRANT
Spindle Axis Vector (0.0,0.0,1.0)
Linear Axis (X, Y, Z)
4th Axis A
5th Axis C
G-Codes
Rapid motion L
Linear motion L
Motion Settings
Circle motion (CLW) DR-
Circle motion (CCLW) DR+
XY plane G17
Plane Setting XZ plane G18
YZ plane G19
Inch G70
Input System
Metric G71
Absolute output code G90
Absolute / Incremental Code
Incremental output code G91
M-Codes
Program stop M0
Optional program stop M1
End of program without reset M2
End of program with reset M30
Spindle direction (CLW) M3
Spindle direction (CCLW) M4
Spindle OFF M5
Toolchange M6
Coolant ON M8
Coolant OFF M9
Postprocessor information
Name Heidenhain iTNC530 Dualtable AC
Version 5.2.0 - Release
Supported NX version NX11 and greater
Unrestricted