Professional Documents
Culture Documents
SYNOPSIS
The Fuel level indicator shows the liter of the fuel far away from the location of
the fuel tank or in the dash pad. Float sensor is fixed in to the fuel tank. The digital
display is used to indicate the full levels are 1, 2, 3, 4 and 5 liter respectively.
INTRODUCTION
The main purpose of this project is to indicate the fuel level in the fuel tanks. The
main purpose behind adding the level scanning section is to avoid malfunctioning of the
receiver section due to battery failure (as no battery is added to the receiver to latch the
present level of the water). When power resumes, the level-scanning section scans and
checks all the levels one by one (from empty to full) and transmits the corresponding
codes to the receiver to show the fuel level in the fuel tank.
BLOCK DIAGRAM
Up to five liter of the fuel are indicated on LCD display along with beep
sound
Receiver section controls the on/off function of the alarm.
The fuel level scanning section scans the fuel level with beep sound after
power resumes.
When fuel reaches the full level, the beep sound for about a minute.
When fuel goes below the empty level, the beep sound is occurring.
APPLICATION