Professional Documents
Culture Documents
I
A O Q
B
D
H
C
S T
N J
M
R L P
E
F
Line drawings are for illustrative purpose only and may not be exact representation of unit.
DIMENSIONS
A. Overall operating height:
with foundry/excavating bucket 150.4 in (3.82 m)
with low profile bucket 154.6 in (3.93 m)
with low profile extended bucket 159.6 in (4.06 m)
Height to:
B. Bucket hinge pin 120.0 in (3.05 m)
C. Top of ROPS 77.7 in (1.97 m)
D. Bottom of level bucket, fully raised 113.2 in (2.88 m)
Overall length:
E. without attachment with coupler 105.7 in (2.69 m)
F. with foundry/excavating bucket on ground 131.7 in (3.34 m)
with low profile bucket 135.8 in (3.45 m)
with low profile extended bucket 140.9 in (3.58 m)
G. Maximum dump angle 51.9°
H. Dump height:
with foundry/excavating bucket 93.7 in (2.38 m) @ 45°
with low profile bucket 90.7 in (2.31 m) @ 45°
I. Dump reach at maximum height with low profile bucket 33.7 in (0.86 m) @ 45°
Maximum attachment rollback:
J. Bucket on ground 35°
K. Bucket at full height 87.6°
L. Wheelbase 44.4 in (1.13 m)
M. Ground clearance – bottom of belly pan 7.0 in (0.18 m)
N. Angle of departure 23.0°
Clearance circle:
O. without bucket 50.7 in (1.29 m)
P. with 66 in (1.68 m) foundry/excavating bucket in carry position 79.6 in (2.02 m)
with 66 in (1.68 m) low profile bucket on ground 83.9 in (2.13 m)
with 66 in (1.68 m) extended low profile on ground 88.6 in (2.25 m)
Q. Clearance circle rear 62.9 in (1.60 m)
R. Rear axle to bumper 36.4 in (0.92 m)
S. Tread over gauge with spec lines 53.9 in (1.37 m)
T. Over the tire width spec tires 64.0 in (1.63 m)
SV185 2 of 4
TIRE SELECTION
Tread Over Tires Each Tire
Type Size Gauge Width Weight*
Heavy-Duty 10 L x 16.5 53.9 in (1.37 m) 64.0 in (1.63 m) 87 lb (39.5 kg)
Premium 10 L x 16.5 53.9 in (1.37 m) 64.0 in (1.63 m) 96 lb (44.0 kg)
Premium-Lined 10 L x 16.5 53.9 in (1.37 m) 64.0 in (1.63 m) 63 lb (28.5 kg)
Severe-Duty 10 L x 16.5 53.9 in (1.37 m) 64.0 in (1.63 m) 115 lb (52.5 kg)
Non-Pneumatic – Solid 10 L x 16.5 53.9 in (1.37 m) 64.0 in (1.63 m) 229 lb (104.0 kg)
Heavy-Duty 12 L x 16.5 — 70.0 in (1.78 m) 110 lb (50.0 kg)
Premium 12 L x 16.5 — 70.0 in (1.78 m) 120 lb (54.5 kg)
Premium-Lined 12 L x 16.5 — 70.0 in (1.78 m) 120 lb (54.5 kg)
NOTE: *Tire weight does not include the wheel weight.
OPTIONAL BUCKETS
Type Width Weight Heaped Capacity
Dirt & Foundry 66 in (1.68 m) 385 lb (175 kg) 14.8 ft3 (0.42 m3)
72 in (1.83 m) 420 lb (190 kg) 16.2 ft3 (0.46 m3)
78 in (1.98 m) 440 lb (200 kg) 17.7 ft3 (0.50 m3)
Low Profile 66 in (1.68 m) 440 lb (200 kg) 13.4 ft3 (0.38 m3)
72 in (1.83 m) 480 lb (218 kg) 14.8 ft3 (0.42 m3)
Low Profile Extended 66 in (1.68 m) 470 lb (214 kg) 15.9 ft3 (0.45 m3)
72 in (1.83 m) 510 lb (232 kg) 17.7 ft3 (0.50 m3)
78 in (1.98 m) 540 lb (245 kg) 19.1 ft3 (0.54 m3)
84 in (2.13 m) 575 lb (262 kg) 20.5 ft3 (0.58 m3)
Light Material 72 in (1.83 m) 475 lb (216 kg) 23.3 ft3 (0.66 m3)
84 in (2.13 m) 540 lb (245 kg) 27.5 ft3 (0.78 m3)
Manure & Slurry 72 in (1.83 m) 480 lb (218 kg) 19.1 ft3 (0.54 m3)
84 in (2.13 m) 545 lb (248 kg) 22.6 ft3 (0.64 m3)
Heavy-Duty 66 in (1.68 m) 450 lb (205 kg) 13.1 ft3 (0.37 m3)
72 in (1.83 m) 510 lb (230 kg) 14.1 ft3 (0.40 m3)
78 in (1.98 m) 530 lb (240 kg) 15.5 ft3 (0.44 m3)
84 in (2.13 m) 550 lb (250 kg) 17.0 ft3 (0.48 m3)
Heavy-Duty with spillguard 66 in (1.68 m) 520 lb (235 kg) 16.6 ft3 (0.47 m3)
72 in (1.83 m) 585 lb (265 kg) 18.4 ft3 (0.52 m3)
78 in (1.98 m) 605 lb (275 kg) 19.8 ft3 (0.56 m3)
84 in (2.13 m) 640 lb (290 kg) 21.5 ft3 (0.61 m3)
SV185 3 of 4
STANDARD EQUIPMENT
OPERATOR ENVIRONMENT Integral engine oil cooler LOADER
Fuel filter with water trap
See page 1 Manual attachment coupler
925 CCA 12V battery
Vertical lift geometry
Master electrical disconnect
ENGINE Loader lift arm support strut
SAE operating load: 1,850 lbs
ISM N844LTA-DI-F-45 diesel DRIVETRAIN Tipping load: 3,700 lbs
135.2 CID (2.2 L) Turbo
2-speed hydrostatic four wheel drive In-cab loader lock
Tier 4 Final Certified
ASA #80 drive chain
Spark Arresting Diesel Oxidation Catalyst
(DOC) muffler SAHR disc parking brake TIRES
Charged Air Cooler (CAC) 10 X 16.5 Heavy duty
High Pressure Common Rail (HPCR) HYDRAULICS
fuel injection
Auxiliary hydraulics: OTHER STANDARD FEATURES
Horsepower: @ 3,050 psi (210 bar) – 24.2 gpm
Gross: 60 hp (44.7 kW) (91.5 L/min) Halogen lights - 2 front, 2 side, 2 rear flood
Net: 57 hp (42.4 kW) Heavy duty front lights
6 micron oil filtration system
Peak torque: 135 lb·ft (183 N·m) Pre-wired for rotating beacon
3-spool loader control valve
120 amp alternator Lockable service access hood
Auxiliary hydraulic disconnects, ISO
Dual element air cleaner Single-point daily service
flat-face – connect-under-pressure
Organic Acid Technology (OAT) with case drain Rear tail lights
Anti-freeze solution to -34º F Hydraulic circuit pedal lock Remote oil drain
Fuel tank - 20 gal (U.S.) Auxiliary function lockout override Remote oil and fuel filters
Over and under radiator and oil cooler Loader lift lockout override Block heater
3-stack after cooler/radiator/oil Heavy-duty hydraulic oil cooler Debris ingression sealing
cooler configuration
Loader arm float position Mounting points for add-on counterweights
Glow plugs
Loader function lockout system Heavy duty rear door
Hydraulic one-way self-leveling
Ride control
OPTIONAL EQUIPMENT
OPERATOR ENVIRONMENT HYDRAULICS OTHER
Enclosed cab: High-flow auxiliary hydraulics – combined: Language decals
Fully sealed and pressurized – FSP @ 3,050 psi (210 bar) – 30.7 gpm Factory-installed tires – see page 3
Glass door with wiper and washer (116.2 L/min) Buckets – see page 3
Sliding side windows – removable Second auxiliary hydraulics Bolt-on bucket cutting edges
Ventilation system with integrated heater
Heater and air conditioner Bolt-on heavy-duty bucket spill guard
LOADER Special paint
AM/FM radio with 2 speakers
Keyless start ignition Auxiliary front electric control Offsite service arrangement
Electro-hydraulic controls: Hydraulic attachment coupler Telematics
For drive/steering, loader functions
Switchable between H and ISO patterns
DRIVETRAIN FACTORY SUPPLIED ATTACHMENTS
Adjustable sensitivity of controls
Mechanical hand controls 1-speed hydrostatic four wheel drive Interior mirror
Hand and foot controls: Add-on counterweights
Hand controls the loader drive function Road lights
and foot controls the bucket and boom Rotating beacon
Non suspension seat Four-corner LED strobe
Deluxe cloth, air suspension seat, with heater Bolt-on heavy-duty bucket teeth
and lumbar support
48 in (1.22 m) pallet forks
Open cab interior trim package
Demolition cab door with polycarbonate
SERVICE PARTS
FOPS level 2
Heavy duty rear door 3 inch (76.2 mm) retractable seat belt
CaseCE.com
©2016 CNH Industrial America LLC. All rights reserved. CASE is a IMPORTANT: CASE Construction Equipment Inc. reserves the right CASE Construction Equipment is biodiesel-
trademark registered in the United States and many other countries, to change these specifications without notice and without incurring friendly. NOTE: All engines meet current EPA
owned by or licensed to CNH Industrial N.V., its subsidiaries or any obligation relating to such change. Availability of some models emissions regulations. All specifications are
affiliates. CNH Industrial Capital is a trademark in the United States and equipment builds vary according to the country in which the stated in accordance with SAE Standards or
and many other countries, owned by or licensed to CNH Industrial equipment is used. The illustrations and text may include optional Recommended Practices, where applicable.
N.V., its subsidiaries or affiliates. Printed in U.S.A. Contains 10% equipment and accessories and may not include all standard
Always read the Operator’s Manual before
post-consumer fiber. equipment.Your CASE dealer/distributor will be able to give you
operating any equipment. Inspect equipment
details of the products and their specifications available in your area.
before using it, and be sure it is operating
properly. Follow the product safety signs and
Form No. CCE201608SV185T4 use any safety features provided.
Replaces Form No. CCE201603SR175T4
SV185 4 of 4