Professional Documents
Culture Documents
Gas Detector / Indicator (USB Powered) With Arduino
Gas Detector / Indicator (USB Powered) With Arduino
This Arduino project is of home automation and safety. In this project we design an
instrument to detect the presence of gas by using a sensor and we indicate it by using a 7
segment LCD display. The gas detection and indication operation is achieved by an
Arduino.
Arduino based tilt detector is used to detect the tilt of the objects. It uses the
accelerometer and LED to detector the tilt in the objects at the time of earth quakes and
motion detection etc.
Part fill vales are mostly used in rain water tanks. Arduino is used to control the water
valve as the water level reaches the minimum level, so that a constant minimum water
level is maintained in the tank.
We can locate the vehicle or human by tracking them using Arduino. The Arduino based
gps tracking system uses GPS module for locating the vehicle on maps. It requires simple
elements like battery and antennas, but with very low cost we can design a tracking
system by using Arduino.
Using Arduino, we can monitor the power (energy) used by a system and alert the user
by sending him text messages. The energy level or the current and voltage ranges are
observed by using an LCD display.
This project explains us the automated parking system of vehicles. It uses the Arduino controller
and IR sensors to locate the surrounded obstacles (vehicles). This is one of the most used real time
objectives in p