Professional Documents
Culture Documents
Question
All routers are running IPv6 OSPF with process ID 100. The loopback0 IPv4 address is
the OSPF router ID of each router.
On HQ router, a provider link is provided and you have to configure an IPv6 default
route on HQ and make sure this route is advertised in IPv6 OSPF process. Also
troubleshoot why HQ is not forming IPv6 OSPF neighbor with BR.
Requirements:
2001:DB8:B:B1B2::1
default route on HQ
3. Make sure that the default route is advertised in IPv6 OSPF router HQ. This default
route should be advertised only when HQ has a default route in its routing table 4.
Router HQ is not forming IPv6 OSPF neighbor with BR. Troubleshoot and solve the
problem
3. Make sure that the default route is advertised in IPv6 OSPF router HQ. This default
route should be advertised only when HQ has a default route in its routing table:
4. Router HQ is not forming IPv6 OSPF neighbor with BR. Troubleshoot and solve the
problem