1015721, 249 Pa
AFFILIATED PROGRAMMES DOWNLOAD.
‘Viewing Module EPOS40 - ELECTRICAL MACHINES.
EXPORT SLT
Course Code
Course Name
(English)
Course Name (Malay)
Course Level
sur
Pre-Requisite Courses
Co-requisite Courses
Equivalent Courses
Teaching Period
Duration
Resource Person
National Education
code
Delivery Period
Duration
PAGE BREAK
Course Learning Outcomes
-_
UNIVERSITITEKNOLOGI MARA,
‘COURSE INFORMATION
Confidential
EPos4a
ELECTRICAL MACHINES
MESIN ELEKTRIK
6 ~ Bachelors Degree
120 Hours
Equivalent to 3 Credits
Face to Face: 56 Hours
Non Face to Face: 0 Hours
Student Preparation Time: 64 Hours
No course recommendations
No co-requisite Courses listed
ELECTRICAL MACHINES (P0541)
17 Weeks
MOHAMAD FAUZI 8 OMAR
(S)Engineering, Manufacturing and Construction
1 Semester
[At the end of the course, students should be able to:
1. Discuss the principle of operation of electrical machines. ( C2 )
2. Solve problems related to electrical machines. ( C3.)
3, Evaluate the performance of electrical machines. ( C5 )
tps aims. ut. edu mylcuriculum/index cfm ?action=viewmodule&retumto=allmoculess.moduleld=79143
181015721, 249 Pa ‘Viewing Module EPOS40 - ELECTRICAL MACHINES.
Course Deseri
This course examines the operating principles, the construction and performance of AC electromechanical
machinery. It covers all essential fundamentals but concentrated on the use of appropriate equivalent
circults in the study of the steady state and quasi-steady state characteristics of AC machines.
Syllabus Content
1. Topic 1 : Review on Basic Power Engineering Concept/Magnetic Circuit
+ Review of basic network, single-phase and 3-phase ac systems, Complex power concept
+ Fundamental principles, Force and torque developed
2. Topic 2 : Single-phase transformer and Three-Phase Transformer
+ Review on operating principles and equivalent circuits of Single-phase transformer; Transformer
testing - short circuit test, open-circut test, equivalent circus, performance analysis.
+ Three-phase transformer operation, construction, connection, single-phase equivalent circuit and
performance analysis,
+ High frequency transformer, voltage and current transformer
‘Auto-transformer; principle and KVA capability
+ Test t
+ Review on Basic Power Engineering Concept
+ Magnetic Circuits
+ Single-phase transformer
+ Three-phase transformer
3, Topic 3 : Three-phase Induction Motor
+ General construction, Principle of operation, power flow diagram, performance analysis, Torque
Slip/speed character'stcs, Torque production, equivalent circuit, power and efficiency
+ Speed control: voltage control, V/f control, influence of rotor resistance on Torque Slip characteristics
+ Single Phase Induction Motor
4, Topic 4 : Synchronous machines
+ Construction, Principle of operation, Induced emf, Distributed winding and torque effects,
+ Gylindrical rotor generator, equivalent circult, phasor diagram, effects of varying excitation, power
angle, synchronization, Parallel operation of AC generators
+ Generators stability, Control of voltage and frequency.
+ Motor operation; equivalent circuit, phasor diagram, V-curve, motor as source of reactive power for
power factor correction
+ Stepper Motor
+ Test 2
+ Three-phase Induction Motor
+ Synchronous machines
Teaching Methodologies
‘+ Blended Learning
Lectures
2 Simulation Activity
2 Tutorial
Proposed % Marks Approved by KPP.
Question Difficulty Levels Range
ca-c2 15-30
c3-c8 35-70
5-6 10-20
Assessment
Continuous Assessment: 40.00%
‘Assignment - 5% out of S on Week 8, Passing Mark(s): 2.
Assignment
clo: 3
‘Quiz - 5% out of 5 on Week 3, Passing Marks): 2
-ntos:/faimsutm edu mylcurreulunindex.cm?action=viewmeduleSreturnto=allmodules&moduleld=791431015721, 249 Pa ‘Viewing Module EPOS40 - ELECTRICAL MACHINES.
Quiz
clo: 2
‘Test 15% out of 15 on Week 6, Passing Marks) 7.
Test 1
clo: 2
Test - 15% out of 15 on Week 12, Passing Mark(s): 7
Test 2
clo: 3
Final Assessment 60.00%
Final Examination - 60% out of 100 on End of Semester, Passing Mark(s): 0.
n/a
clo: 1,2,3
Duration : 180 minutes
Transferable Skills
‘Able to discuss, solve problems and analyse the performance of electrical machines.
Special Regulation
This Module has no special regulation
Reassessment Requirement
Repeat the Course
Reassessment Description
‘The assessment of this Course is inextricably linked to the delivery. The student must reattend the Course
in its entirety in order to be reassessed,
Recommended Text
1. A.E. Fitzgerald, Charles Kingsley Jr, Stephen Umans, Electric machines: Analysis and Design
‘Applying MATLAB, McGraw-Fiil, 2000., 6, McGraw Hill, 2002, ISBN: n/a
2, Chapman, Stephen 1, Electric Machinery Fundamental, McGraw-Hill Series in Electrical Engineering,
2003, 4, McGraw Hill, 2010, ISBN: n/a
3. Theodore Wildi,, Electrical Machines, Drives and Power System, 6, Pearson Prentice Hall, 2013,
ISBN: n/a
References
1. P.C-Sen, Principles of Electric Machines and Power Electronics, 3, John Wiley & Sons, 2014, SBN
978-1-118-078,
Other References
‘This module does nat have other references
Course Extra Information
This Module has no extra information
PAGE BREAK
-ntos:/faims.utm edu mylcurreulunvindex.cm?action=viewnedulesreturnto=allmodules&moduleld=79143