Professional Documents
Culture Documents
Literature Survey
Literature Survey
Composite plate with laminates symmetrically stacked with respect to the plate mid-plane
has significant stress distribution under loading. This was investigated by S.J.Guo for composite
panels subjected to shear loading and the buckling behaviour were analysed. This gave a relevant
………………………………………………………………………………………………………………………
………………………………………………………………………………………………………………………
……………………..Beside accentuation on approximate shear loading condition, numerous
references for cut-out shape optimization are cited as follows.
S.Guo analytically optimized the cut-out shape on steel plates under uniaxial tension load.
This work was extended to composite plates by the buckling effect on composite plates with cut-out
under uniaxial tension load was
In the following paper we will present a composite plate with cut-out, subjected to negative
shear load with a standard layup[45,-45,0,90,0]2s .The comparison of different on stress distribution in
the vicinity of free laminate corners
Reference
1. S.Guo, R.Morishima, X.Zhang, A.Mills, “Cut-out Shape and Reinforcement Design for composite C-
section beams under Shear Load”, Elsevier Journal, 2008.
3. M.Jafari, J.Rezaeepazhand, “Stress Concentration in Metallic Plates with Special Shaped Cut-out”,
Ferdowsi University of Mashhad, Elsevier Journal, 2008.
5. S.J.Guo, “Stress Concentration and Buckling Behaviour of Shear Loaded Composite Panels”,
Cranfield University, Elsevier Journal, 2006.
6. K.P.Rao, Ruchin Pandey, Sandeeep Thakur, Ramanath KS, “Stress Concentration and Stability
Studies in Composite Ribs with flanged cutouts”, CAE Group, Infosys Technologies Ltd., 2001.
7. Dinesh Kumar, S.B.Singh, “Postbuckling strength of composite laminates under inplane shear with
various shaped cutouts under inplane shear” , Birla Institute of Technology and Science, Elsevier
Journal, 2010.