ORI SPSUE Ie Serre tnavage ane show be eon
UDC 621,882.42 DEUTSCHE NORM.
Product grade A washers
with a hardness up to 250 HV
designed for use with hexagon head bolts and nuts
‘Scheiben; Produktklasse A.bis Hérte 260 HV,vor2ugswels This standard,
fr Sechskantschrauben und mutter sogether with DIN 126 Part 2,
March 1990 edition,
supersedes DIN 125,
E May 1968 edition,
Inkeeping with current practice in standards published by the Intemational Orgenization {or Standerdlzatlon (ISO), a comma
thas been used throughout as the decimal marker.
Dimensions In mm
1 Scope and field of application
‘This standard specities requirements for product grade Awashers with a hardness up to 260HV. designed
for use with bolts of property class 8.8 or less. The preferred applicetion of those washers Is in product
‘grades Aand Bhexagon head bolt/hexagon aut assemblies, with widths across flats a8 specified inISO 272,
Note. The washer hardness shall be selected as a function of the assumed bearing pressure In the bolted
assembly.
2 Dimensions
Type A, without chamfer ‘Type B, with ext
Commercial sizes: 1,7mm to 37mm. ‘Commercial sizes: 6,3.nm to 166 mm.
80° to 45°
Continued on pages 2 to 4
‘eu éloger Unterlage von KN DU
[Scavareg Gti Bern nose neve MBM Din 26 Pant Engl Price group 6
neo Sees No. 0108Page 2 DIN 125 Part 1
Table 1.
Nominal
size
Clearance
hole diameter, dy
dy
nominal sia|
‘Outside diameter,
Nominal
sleo
Thickness,
a
Mass
k9skatdm
per
1000 unit,
Inka, =
os
‘oa
0.031
‘0.037,
0,032
0,098.
9,127
0110
0,186
0,308
aa
4,02
4,39.
183.
‘357,
627
202
iis
147
172.
183.
23.
BT
a3
408
556
Tha
753
Bas)
21]
136
133.
430
783
220,
204
266
330,
434
426.
a7
58
492
586
626
748
132,
253,
132
996.
132
108
1250
132
108”
4300.
182
128
1710.
152
128.
170.
152.
128.
1830.
182
728.
2230
20815
172
148
2830
218.15
172
148
3130
218,18
172
[as
"3000,
228,16
172.
148
3310
238.15.
192
168
4080,
49 150
248,18,
192
168
4470
248,55
192
168
4270
248,15
192
168
3910)wd
IN 125 Part 1 Page 3
3. Technical delivery conditions
Table 2.
‘Material ') Stee! Staintess steel
Harcness class. OHV 200 140HV 200HV
Faranessy HV | 14010260 | 20010250 | 14010250 | 20010 250
Mechanical properties 4,
otra
pinnae Z Azangad FY Ch and C4
1s spectod in = (267 Pert 1.
Limit deviations ona Preset rade | a
geomet iera0608 Le peciican niet
Bright
OWN 822 shalt apply with regard to surtace roughness
Surfece finish DIN 267 Part 9 shall apply with regard to electroplating,
‘any other types of finish being subject to agreement.
‘Acceptance inspection ‘DIN 522 shall apply with regard to acceptance inspection.
Is, subject to agreement
1) Washers may be made of non-ferrous metals or other mater
2) For h nol exceeding 0,5 men, the hardness shall be HV2 and for / exceeding 0.5mm, HV10.
4 Designation
Designation of a type A or B washer of nominal size 19 and hardness class 140HV #):
Washer DIN 125 — 13 ~ 140 HV
Whore stainless steel washers are to be supplied, the steal grade as specified in DIN 267 Part 11 or the material number as
‘specified In DIN 17440 shall be included In the designation:
Washer DIN 125 — 13 ~ 140 HV~A2
Washer DIN 125 — 13 - 140 HV— 1.4306
1 particular washer type Is desired (6.0, typ0 A), the type symbol shall be included in the designation,
Washer DIN 125 ~A 13 — 140HV
‘The DIN 4000-8~1 tabular layout of article characteristics shall apply for washers complying with this stendard.
‘Wher
1) This hardness class shall also be used where no material or only symbol St'is specified in existing documentationPage 4 DIN 125 Part 1
Standards referred to
DIN 267 Part 9 Fasteners; technical delivery conditions; electroplated components
DIN 267 Part 11 Fasteners; technical delivery conditions; stainless and acid resistant steel components (with addendato
180 3508)
DIN 522 Metal washers; technical delivery conditions
IN 4000 Part S Tabular layout of article characteristics for washers
IN 17440 Stainless steels; technical delivery conditions for plate and sheet, hot rolled strip, wire rod, drawn wira,
‘steel bars, forgings and somttinished products
180 272 Fasteners; hexagon products; widihs across flats
Previous editions
DINKr961:01.96,10.97; DINKr963:01.96,10.7; DIN134:03.23,10.36; OIN125Part 1:02.21,12.21,0828; OIN126:10.96,
05.43, 05.68. Fe
Amendments
‘The following amendments have been made to the May 1968 edition.
{) DIN 125 has been split up into two standards, Part 1 and Part 2, he reasons belng given in the Explanatory notes.
’b) Tho fille of tho standard has been amended,
¢) The outside diameters for nominal sizes 2,
{6} Nominat size 165 has been included.
€) Limits of size have been given on the basis of the (olerances specified.
) Hardness classes have been introduced.
9) The technical delivery conditions have been revised.
h) The standard has been ealtorally revised.
64,84 and 10.5 have been changed.
Explanatory notes
In the case of hexagon head bolts and hexagon socket head cap sorews, the design of the underhead fillet within the area
defined by the minimum bearing face diameter.d,,is at the manufacturer's discretion. This may occasionally result in an inter=—.
ference between boltiscrew and washer where tho lattor has a clearance hole made to the fine series as specified in ISO 273.
Normally.such interference will pose no problems since, when the assembly s tightened, the washer undergoes deformation
tesulting in the washer being moulded to fit he shape of the underhead filet. t washers of greater hardness are used, there Is
the risk that the edge of tho washer will cut into the fillet and thus damage it
Taking this into account, the responsible ISO Committee, TC 2, decided that the clearance hole adge should be provided witha
chamfer or a radius to minimize the risk of such a damage. n ine with thie decision, the responsible technical committee in
Germany deals with ‘sot’ and hard’ washers in separate Parts ofthis standard to allow for the difference in performance of
‘both washer types,
For washer sizes up to 37, the clearance hole diameter, outside dlameter and washer thicknoss havo been hermonized with the
specifications given in the 1983 editions of ISO 7088") and ISO 7090*) where such were avaliable. At present, these ISO Stand
ards of their revised versions (currently being prepared) cannot be adopted as DIN Standards since, in Germany, @ consider.
ably greater number of sizes is required than specified in the ISO Standards,
International Patent Classification
F168 43/00
*) Obiainable trom Bouth Verlag GmbH (Auslandsnormenverkaut), BurggratenstraBo 6, D-1000 Berlin 30,