INITIAL RELEASE
STUB COLUMN (REF)
my
-—TELESCOPING COLUMN (REF)
7
LOWER KEY SLOT (REF)
B)h4X5
Hes
2 42 WITH LIFT IN LOWERED POSITION
a
SHOP LOCATE IN ALIGNMENT
WITH EYE BOLTG)ANO WELD
ITEM@AS SHOWN.
NOTES:
LOCATE TRANSDUCER ASSEMBLY 90° CCW
FROM VEE NOTCH ON COLUMN FLANGES
FOR IDENTIFICATION OF BUBBLED ITEMS
SEE PARTS LIST FOR THIS ORDER
This drawing and all information thereon is the property of
Baker Process and is confidential and must no! be mace
public or copied. This drawing is loaned subject to relurn
pon demand and ie nat to be used drectly or indirectly
in ony way detrimental to our interests. Rev € 19/00
(DO NOT SCALE PRINTS [FILE SPEC. 1083476, REF. FROM
3/21/01
LIFT POISTION
ASSEMBLY, CLD120 10834782562 Row 1082
NOTE:
|. AFTER ASSEMBLY, ALL SURFACES TO HAVE
SURFACE. PREPARATION & PAINT IN ACCORD~
ANCE WITH VARIABLE COMPONENT PARTS
LIST.
PARTS LUSTS:
L48a5cG-1
L4885G-2
NET WEIGHT: 103 LB
This drawing and ail information thereon ie the propery of => PE HOLD FRACTIONAL
a crag atarund au hel be made publ or copied. This drawing | MACHINED
fiomed subject to return upon demand end le not to be used directly | DIMENSIONS
or Inaivocty tony wey dettimental to our interests. To + 1/64"
Aer ea]
[Aone To
em
HAR 29 B84NOTE:
I. AFTER ASSEMBLY, ALL SURFACES TO HAVE
SURFACE PREPARATION € PAINT IN ACCORD-
ANCE WITH VARIABLE COMPONENT PARTS
LIST.
PARTS Lists:
L48857-1
L48897-2
NET WEIGHT: 103 LB
This drawing and ail information thereon Is the property of Eimco PEC
‘and ts confidential and must not be made public or copled. This drawing
Is loaned subject to return upon demand and Is not to be used directly | DIMENSIONS
or Indirectly In any way detrimental to our interests. To = 1/64"
2062 Rov 19182NOTE:
|. AFTER ASSEMBLY, ALL SURFACES TO HAVE
SURFACE PREPARATION & PAINT IN ACCORD-
ANCE WITH VARIABLE COMPONENT PARTS
LIST.
PARTS LIST:
L48856-!
NET WEIGHT: 103 LB
This ‘and ail Information thereon Is the property of Elmco a FEC
tnd a conidential and must not made public or copled. This
(ouned subject to return upon demand and fe not to be uned directy
x inaivoetly i any way detrimental to our interests,
PPE Beret se a]
(2 PLACES) OE EISHEAVE BRACKET AssEmBLy
Afown Tw |
Aleasco] 277]
REVISION fern GEN]NOTE:
I. AFTER ASSEMBLY, ALL SURFACES TO HAVE
SURFACE PREPARATION & PAINT IN ACCORD-
ANCE WITH VARIABLE COMPONENT PARTS
LIST.
PARTS List:
L48859-1
NET WEIGHT: 103 LB
‘This drawing and all Information thereon Is the property of Elmco PEC
‘and is confidential and must not be made public or copied. This drawing
Is loaned subject to return upon demand and is not to be used directly
NMIEW A-A
or indirectly in any way to our interests.
(2 PLACES)
REVISION
2802 fev. 102wew A-A
(ENLARGED)
FARTS L/ST:L489/0-/
NET WT: 25 LB
This drawing and all Information thereon Is the property of Elmco PEC.
and isc ial and must not be made public or copied. This drawing
{s loaned subject to return upon demand and is not to be used directly
oF Indirectly In any way detrimental to our Interests,
[AAI nor sate panrs I
plone 3-5:24| SWITCH € MOUNTING
' BRACKET ASSEMBLY
REVISION ‘By [onecxen] vate | 7}
2062 Rev 10
WAR 29 1984NOTE:
1, AFTER ASSEMBLY, ALL SURFACES TO
HAVE SURFACE PREPARATION AND PAINT
IN ACCOR.DANCE WITH VARIABLE
COMPONENT PARTS LIST.
PARTS LISTS:
L4eol2-1 (WITH BEARING)
L48912-2 (WITH BUSHING)
NET WEIGHT: 70 LB
This drawing and ail information thereon le the property ot Eimco PEC | HOLD FRACTIONAL
and is confidential and must not be made public or copied. This drawing | MACHINED
{Piotned subject to Telurn upon demandand Te nol to be used directly | DIMENSIONS
oF Indirectly in any way detrimental to our interest Fontes"
2002 Rev Tome
REVISIONIT WILL BE NECESSARY TO HOLD BACK
PAINT FOR FIELD WELDING ON ALL STEEL.
STUDY ERECTION DRAWINGS CAREFULLY AND
DETERMINE FIELD WELD AREAS IN QUESTION.
PAINT MUST BE HELD BACK 3° FROM WELDS.
43
onan
s
EXAMPLE
EIMCO PROCESS EQUIPMENT COMPANY — Salt Lake City, Utah
Ths drawing and all information thereon is the property of Eimco PEC Bmensths TO eva
and is confidential and must not be made public or copied Ths drawing |— @coryacer 99 ar
'S loaned subject fo retum upon demand and is not lo be used drectly ~ |ewwesteceamaeran on
or_ndrectly many way delrmental to our interests, Ta Reser eee
DATE
*HOLD BACK PAINT’ INSTRUCTIONS,
FOR FIELD WELDS
76470A91
CAD-£267 Rev. 6/93INITIAL RELEASE
REVISON EN By [appr | _OATe,
ADDED PART ‘D"
73697 | Ros [| BH | 3-1-01
ONE CLIP_ ASSEMBLY
2 1/2" LONG @ PART ‘A’
3° LONG @
474" MACHINE SCREW
GRATING
—_ fen
|
Geeesewe| psaectaes|
‘If
4" NUT 1
[| 7 support MEMBER
if (REF)
|
PART ‘C* |
3 1/2" LONG @ PART ‘D" I
GRATING CLIP_ASSEMBLY
% CLIPS (MIN) REQUIRED AT EACH GRATING PANEL
GRATING CLIP_ASSEMBLY
PART_NO: 906204A (1° TO 1 1/2’ GRT'G)
PART_NO: 906204C (2° GRT'G)
PART_NO: 906204D (2" + THICK FLANGE)
MATERIAL: 304 SS
SUPPLIER: UINTAH FASTENERS
53 W. GUEST AVE.
SALT LAKE CITY, UTAH
(801) 293-1070
C\ This drawing and all information thereon is the property of
BAKER Baker Process and is confidential and must not be mace
HUGHES | 2c 2 copied. ‘This crowing is loaned subject to return | ay GOB Mr rcaar
Upon demand and is nol fo be used drectly or indrectly rie
Baker Process in ony way detrimental to aur interests Rev € 8700
DO NOT SCALE PRINTS | FILE SPEC. 906204 REF. FROM ORG. S.0.
pate | 8-17-99
oRAWN | _BS
cHecko| BH
APPR. BS
ADN.
GRATING CLIP ASSEMBLY
te 906204