Professional Documents
Culture Documents
Cấu hình và vận hành Switch Core 6500
Cấu hình và vận hành Switch Core 6500
Cấu hình VSS Theo mặc định, các switch 6500 hoạt độ ng ở chế độ standalone mode. Ta thực hiện các
bước sau đây để chuyển hai 6500 chassis sang chế độ virtual stack.
Bước 1: Đảm bảo SSO và NSF được cấu hình và kích hoạt.
Bước 3: Cấu hình VSL Port Channel, PO# giúp định danh Port Channel duy nhất trên mỗi chassis.
Bước 4: Chuyển chế độ Standalone Chassis sang chế độ Virtual Switch mode.
Bước 1:
6500A(config)#redundancy
6500A(config-red)#mode sso
!
Bước 2:
6500B(config-vs-domain)#switch 2
6500B(config-vs-domain)#exit
Bước 3:
Bước 4:
6500A#switch convert ?
check check if this switch and its modules are VSS capable or not mode mode keyword virtual or
standalone
This command will convert all interface names to naming convention "interface-type switch-
number/slot/port", save the running config to startupconfig and reload the switch.
NOTE: Make sure to configure one or more dual-active detection methods once the conversion is
complete and the switches have come up in VSS mode.