Professional Documents
Culture Documents
Dear Firnds
Dear Firnds
There is a substation building over Compacted fill of 13 m.Adjacent to the building there is a
retaining wall at a distance of 1 m from the substation building. The substation building has been
modelled and analysed and the Base pressure contour is plotted using STADD soft ware.The base
pressure at the face closer to the retaining wall is maximum for nearly 0.5 m and gradually decreases
For calculation of the lateral load to the retaining wall (surcharge from the substation building) what
will be correct method of calculation of Base pressure.Is it the average pressure or the maximum
pressure .
Regards
To: general@sefindia.org
Dear Frnds,
Any way I hope that attached stuff may guide for further going....
In india -- Construction/Design Specification for land based Runways /Helipads are generally
followed as of Indian Roads Congress.
Regards