Professional Documents
Culture Documents
Readme
Readme
Requirements
======================
======================
Instructions
======================
BEFORE STARTING: Make sure you have the included SCP Driver installed.
1. Make sure your Wii remote is NOT LISTED in the Windows Bluetooth Devices menu
(Wii remotes appear as devices named "Nintendo RVL-CNT-01" or "Nintendo RVL-CNT-01-
TR")
- If your Wii remote IS LISTED, then right click and choose REMOVE DEVICE.
- Close and re-open WiinUSoft if you make any changes here.
2. Press the SYNC button on the top left corner of WiinUSoft.
3. Press the red SYNC button on the inside of the Wii remote's battery cover.
4. BE PATIENT. The drivers may take 1-2 minutes to install. Then the Wii remote
should appear in the list on the left side of the window.
5. Click the CONNECT button on the menu next to the Wii remote you want to use and
then choose Player 1, 2, 3, or 4.
YOU CAN CONNECT UP TO 4 WII REMOTES, FOLLOWING THESE STEPS FOR EACH, EXCEPT
CHOOSING A DIFFERENT PLAYER NUMBER ON STEP 5!
NOTE: You can skip steps 1-4 if you have already connected that particular Wii
remote using the method in steps 1-4 in the past and it shows up in the list on the
left of the window!