Dake: 23-Ap- 7
THE AGA KHAN UNIVERSITY HOSPITAL
BIO-MEDICAL ‘WORK INSTRUCTION
APPROVED BY;
Sr. Manager, Bi
ISSUEDBY : Ahmed Amirali
‘Team Leader BME-2
1
Equipment : — CO2LASER
WORK INSTRCUTION # BME:2-035
ISSUE DATE: wold
REVISION DATE: 98/08/2020. Rev. No. 02
PAGE: OLof 02
rage, C2qioo
Bertordeaw 249 6ak6
Manufacturer : LUMENIS,
UT qa
Model : ACUPULSE 40
‘SINO. TASK STATUS (PASS/FAIL)
Ex Visual Inspection
1 Inspect the system's exterior surfaces for week)
| damage. oe
Scanned with CamScannerDate and time —
| __Laser emission indicator Hash Tn
when lasing,
Max. Power in CW (service mods)
Alignment check “CW Gian power (ass?
| mode) ete
9 ‘Calibrations, Alignments and Tests
[10 | Alignment check - Pulssr @ max power
(laser mode)
2 Remote interlock
i Coolant flow
| Coolant leakage ion
ig Slop switch
Delivery Arm transmission
Far & Near check (lasing)
Touch-Sereen calibration:
t
ment check - SP @ max power (laser
Scanned with CamScannerDate wnd time”
Laser emission indicator Hashim Ready, on
fo when lasing, oie
Max, Power in CW (service mode)
Max. Power in SP mode
Internal Power Meter Calibration verified
& Alignment check - CW @ max power (laser
L mode) iia
{ 9. Calibrations, Alignments and Tests
10. ‘Alignment check - Pulser @ max power
(laser mode)
‘Alighment check - SP /@ max power (laser
moxle)
Remote interlock
‘Coolant flow
i Coolant Leakage inspection
1s Emergency lasing stop switch
16) Delivery Arm transmission
f iz Par & Near check (lasing)
8, Touch-Sereen calibration
Reference: Service manual ACUPULSE 40
Scanned with CamScanner