Professional Documents
Culture Documents
Problem 1) For an engineering structural member under loading, the strain components
at a point are found to be:
mm
x 500
mm
y 1250 xy 1900 rad
mm mm
Find the strain components n and nt for the n-t axes oriented as shown below.
y
t
x
25
n
Problem 2) The strain rosette shown below was used to measure the following strain
data on the free surface of a stressed body at a point.
mm mm mm
a 750 b 1250 c 50
mm mm mm
Find the strain components x , y , xy at the point
c b
a
Problem 3) Show a Mohr’s Circle plot depicting the principal strains and the maximum
in-plane shear strain for the strain condition below acting at a point in an engineering
structural member.
mm
x 500
mm
mm
y 1250
mm
xy 1900 rad
a)
R=1290
. .C
ε2 = 917 µ mm/mm (C)
.
ε1 = 1670 µ mm/mm (T)
(375, 0)
V .
(-500,-950)