R310~ 13/06/07
Page 1/2
TECHNICAL DATA SHEET
rms to cur jons of :
‘+ 180 11607 Part 1: 2008 and EN 868 Part 2:09
‘= USA Code of federal regulations food and drug (FDA) TITTLE 31 Part 176-170
* EUROPEAN GUIDELINE 94/62 (heavy metals in packaging)
+ MEDICAL DEVICE DIRECTIVE (MDD) 99/42/EEC
Inaceor EN 868-part2: REQUIREMENTS AND TEST METHODS
‘Chapter | Characteristics Test Unit Requirement “Average
|__ method Value
a2 Materials
Virgin raw materials = = - ‘Conform
4444 |General Visual ~ No tears, creases or localised thickening | Conform
observation sufficient to impair its functioning
|
4442 | Colour Visual = |= | Visual examination of a hot extract method | No leaching
observation | ISO 6588
4aI3 | Toxicity National | - | No health hazard Conform
regulation |
[441.4 | Average mass of 1m? | ISO538 | gin? |The average mass shall be within = 6 % of @
the nominal value stated by the
manufacturer
[444.5 |pH-value 180 6588 ‘S 1 mm / 0,01 m?B10 par Ahlstrom se
Inaccordance with EN 868-part2 : 99
Chapter ] Characteristics Test] Unit Requirement
method,
‘Speciic requirements for creped paper
Elongation ENISO TOinmachine direction —— 115
1924.2 22 in cross direction 4
Water repeliency ‘nnexB | 8 220 for panetration time 2B
Pore size diameter “AnnexG | ym | ='60 (maximum equivalent pore size 20
diameter) (average)
Drape of the wrap ‘AnnexD | -mm |< 125i the machine direction 423
<< 160 inthe cross direction 148
Tensile strenath ENISO | kW [2 1,33n machine direction 2,08
1924-2 | 20187 in cress direction 1133
Wat tensie 180.3781 | ikNim |= 0,33 in machine direction O53
2.0.27 in eross direction 04
In accordan Is04 4s
‘Chapter | _ Characteristics Test] unt Requirement ‘Average
method Value,
‘Germ prooinessin ] DIN 560586 ] NII] No growth on agar plates ‘Conform
523 | moisture 1087 ~
Chap. 2.14
Germ prootness with | DIN 58953-6 | Nil_| No colonies detected Conform
passage of air 1987
Chap. 2.15
| AHLTROM SPECIALTIES : Pont-Audem:
Name : HOUTE Hen
Postion: Queliy Manager liance’
Date : 13" Of June 2007
Signature: