Professional Documents
Culture Documents
SPORTSTER
XL
There’s big news in the Sportster family for the 2004 model year, including a complete
redesign and a re-engineered Evolution® engine. But the soul of the Sportster remains
Sportster®
Sportster®
Sportster®
XL 883C
MODELS
XL 1200R
XL 1200C
883 Custom
4
1200 Custom
unchanged, offering raw-boned styling and on-road agility that makes customising easy and
1200 Roadster
Sportster® 883
nearly limitless. Which means this living legend can go wherever your imagination takes you.
49
50 COMFORT
Seats
1
Sit in style with a sleek Badlander ® Seat, move
closer to the controls with a Forward Position
saddle, or opt for more padding and support
with a deep-bucket Sundowner ™ Seat or a seat
with Rider Backrest for long journey pursuits. 2
Add an Upright with Back Rest Pad for style
and extra passenger comfort.
Badlander® Seat 1
Forward Position Seat 2
3
Seat with Rider Backrest 3
FLEXIBILITY
Bags/Storage
Stow your gear for the long haul in 1
PUT IMAGINATION TO THE TEST
STYLE
Back End
Chrome out the rear with Custom Wheels,
Sprockets, Upper and Lower Belt Guards and
Caliper Inserts or a Complete Rear Chrome
Caliper Kit. Chrome Profile® Low Rear Suspension
can drop your back end in style while also
lowering your seat height.
1 2 3
FLEXIBILITY
Windshields
Get radical coverage with a Colour-Matched
Detachable Quarter Fairing, or opt for a
Detachable Super Sport, Compact or Touring
Windshield. Smoked varieties reduce glare
and add an element of style.
1 2
STYLE
STYLE Front End
Details Choose from a variety of custom wheels,
Choose from a wide selection of bolt-on including the Detonator,™ ThunderStar™
Accessory Collections and Air Cleaner Cover and Chrome-Laced styles. Try black-accented
Trim to cover your custom bases. Smaller details versions to complement dark paint or start
like a Chrome Tappet Block Cover can make your a blacked-out theme. Chrome Lower Fork Sliders
Evolution® engine shine even brighter. Polish and Calipers can take you the extra custom mile.
things off with an assortment of chrome hardware.
1 Detonator Three-Spoke Custom Wheel
Colour-Matched Air Cleaner Cover 2 Chrome-Laced Wheel
58 Sportster ®
NEW
Windshields
A. QUICK RELEASE DETACHABLE
COMPACT WINDSHIELD
Combine the classic Harley-Davidson® shape with a
revolutionary new attachment system, and you have the
best of style and function. The windshield mounts to the
fork tubes with elegant die-cast lever-release clamps,
so the windshield does not require any “leave-behind”
docking hardware. You get quick on-and-off
convenience, and a clean, custom look. No tools are
required, and the kit includes everything needed to
install the windshield.
Standard-Height, Clear.
58063-04 Fits ’88-later XL, Dyna
(except FXDWG and FXDXT)
and FXR models. $334.95
Standard-Height, Lightly Smoked. (shown)
58601-04 Fits ’88-later XL, Dyna
(except FXDWG and FXDXT)
and FXR models. $369.95
Low-Profile, Lightly Smoked.
58602-04 Fits ’88-later XL, Dyna
(except FXDWG and FXDXT)
and FXR models. $359.95
NEW NEW
DOCKING HARDWARE
FOR DETACHABLE WINDSHIELDS (not shown)
Each kit includes polished clamps and all required
mounting hardware. Patented.
58164-96A Required for installation of Detachable
Windshields P/Ns 58034-96, 58112-96,
58570-96, 58441-96, 57960-97, 58626-
99. NOTE: XL, FXR and FXD models with
Front Turn Signals originally located on
the upper triple clamp may require the
additional purchase of Turn Signal
Wiring Kit P/N 72389-96. $69.95
F. COLOUR-MATCHED HEADLAMP
VISOR KITS (SPORTSTER ® /DYNA)*
Add an element of racy style to stock headlamps
with these visors, available in prime or high-quality,
colour-matched Harley-Davidson® paint.
Fits ’95-later Sportster models (except XL
Custom), ’95-later Dyna models (except FXDXT,
FXDWG), ’82-’94 FXR and FXRS models.
*NOTE: This product is a “Paint to Order” accessory.
Please allow for an average of 5 weeks delivery for
this item.
NEW
BACKREST BACKREST
HEIGHT ANGLE
Shown with:
A. SEAT WITH ADJUSTABLE RIDER BACKREST FOR SPORTSTER MODELS
TOURING BACKREST PAD
With a larger backrest pad for comfortable two-up
cruising, this pad is designed to complement Sportster
and Dyna Seats.
51667-98 Fits all H-D® Low Medallion NEW
Plate-Style Sissy Bar Uprights. $59.95
Shown with:
SMOOTH BUCKET PASSENGER BACKREST PAD
Features large bucket shape, with a generous radius
and ample padding. This backrest pad offers extra
comfort for your passenger.
51132-98 Fits models equipped with Low
Plate Style Sissy Bar Upright. $79.95
B. SUNDOWNER BUCKET SEAT FOR SPORTSTER MODELS
C. SPORTSTER DELUXE TOURING SEAT*
This pillow-look seat is designed with wider, bucket-
shaped seating areas. The increased filler thickness
adds additional support and long-distance comfort.
Includes passenger grab strap. Backrest Pad NEW
P/N 52545-84 (sold separately). Seat width 12.0";
passenger pillion width 11.5".
52109-04 Fits ’04-later XL883C and
XL1200C models. $199.95
52112-04 Fits ’04-later XL883 STD (with
separate purchase of Passenger
Footpeg Kit P/N 50203-04)
and XL1200R models. $199.95
52105-93C Fits all ’83-’03 XL models.
NOTE: XL1200S, 1200C and
883C requires separate
purchase of Seat Bracket
Kit P/N 52030-98. $195.95
Shown with:
PILLOW-LOOK LOW BACKREST PAD
52545-84 Requires Low Plate-Style Sissy
Bar Upright for installation. $57.95
NEW
NEW
NEW
Shown with:
TOP-STITCHED SMOOTH LOW BACKREST PAD
Matches models with top-stitched seats. Also matches
’99 FXR model stock seat.
52612-95 Fits with H-D® Low Plate-Style
Sissy Bar Uprights.
Shown with:
DIAMOND BACK PILLION*
Adds two-up capability to the Diamond Back Seat. This
custom-look pillion complements the seats in our
Diamond Back Collection and is interchangeable with
Diamond Back Tail Sections. Kit includes pillion and
passenger grab strap. Passenger pillion width 5.5".
1
52069-98 Fits ’83-’03 XL models and ’84-later
2 Softail® models equipped with Diamond Back Seats
(except FLSTS and FXSTD models). (Does not
work with Detachable Pillion Hardware Kits.)
Insets:
DIAMOND BACK CHROME TAIL SECTIONS
A hand-polished chrome-plated steel insert, fitted to a
vinyl covered moulded base, provides long-lasting good
looks. Includes mounting hardware for quick, easy
installation. Can only be installed with appropriate
Diamond Back Seat.
Fits ’83-’03 XL, ’93-’03 FXDWG, ’82-’94 FXR, ’99 FXR
models, and ’84-later Softail (except FLSTS and
FXSTD) models.
1. 52053-96 Diamond Accent.
2. 52620-95 Solid.
D. PILLOW-LOOK SEAT AND BACKREST PADS E. DETACHABLE PILLION PAD HARDWARE KIT
NEW NEW Sportster ®
69
Tank Bras, Seat Covers and Hardware
TANK BRA FOR SPORTSTER FUEL TANKS
This tank bra is made with non-abrasive, fleece-backed
vinyl material and features an embroidered “Bar &
Shield” logo. It protects your fuel tank from scratches
from keys, belt buckle, etc. Designed for easy installation
and a custom fit without disassembly of the tank or seat.
F. 62027-04 Fits ’04-later XL883C
and XL1200C models.
G. 62030-04 Fits ’04-later XL883 STD
and XL1200R models.
61929-98 Fits ’97-’03 3.3 gallon
XL fuel tanks.
61930-98 Fits all 2.25 gallon XL fuel tanks.
Backrest Pads
A. MINI RAIL BACKREST PAD
Innovative Mounting System features a brushed
stainless steel insert framed with chrome plate and
hardware.
52513-94 Fits XL, FXR, FXD, and
Softail® models (except FXSTD)
equipped with Badlander® Seats,
select Exotic Collection seats
and Mini Rail Sissy Bar Upright.
B. SPORTSTER CUSTOM
SHORT RAIL BACKREST PAD
This pad is the perfect match for the stock seat on the
XL1200 Custom.
52992-98 Fits ’96-later XL1200 Custom
models equipped with H-D®
sideplates and Short Rail
Sissy Bar Upright.
5
6
GENUINE HARLEY-DAVIDSON SISSY BAR UPRIGHTS FOR XL MODELS ’04 XL models with
’82 -’03 XL models, ’04 XL models with Detachable Sideplates,
’91-’01 Dyna models, Rigid Sideplates, ’84-later Softail models
’82-’00 FXR models ’02-later Dyna models (except FXSTD)
1. Chrome Mini Rail Upright 52744-94 51512-02 52738-94A
2. Chrome Mini Rail Upright w/HD Script Logo 52764-90A 51511-02 N/A
3. Chrome Short Rail Upright 52728-95 51513-02 52737-94A
4. Chrome Mid-Low Upright Insert Style N/A N/A 52754-04
5. Chrome Low Upright Insert Style 52654-84 51515-02 52736-85A
6. Chrome Low Upright Medallion Style 52655-84 52909-02 52735-85
7. Chrome Low Upright Bar & Shield 52739-83 51514-02 N/A
8. Chrome Tall Upright Insert Style 52774-82A 51518-02 53552-81A
9. Chrome Tall Upright Medallion Style 52777-85A 51519-02 52749-85A
Wrinkle Black Mini Rail Upright N/A 51500-03 N/A
Wrinkle Black Short Rail Upright N/A N/A 53010-98
10. Wrinkle Black Low Upright Medallion Style 52426-99 51517-02 53007-98
11. Wrinkle Black Tall Upright Medallion Style 52421-99 51516-02 N/A
Gloss Black Mini Rail Upright N/A N/A 52823-95A
Gloss Black Short Rail Upright N/A N/A 52822-95A
Gloss Black Low Upright Medallion Style N/A N/A 52819-95
74 Sportster ®
D. DECORATIVE MEDALLIONS
Display a touch of attitude. Ideal for use on plate-style
Sissy Bar Uprights and Battery Covers, the adhesive
backing on these high-quality Cast Medallions allow
easy installation on most flat surfaces. The medallions
are available in black accented chrome or antique nickel
finishes. The Oval “Bar & Shield” and the “Bar & Shield”
with Wings medallions look great with Chrome Backrest
Mount P/N 52527-01 and 52531-01.
Oval with Bar & Shield – Chrome
91716-02 Size 3 3/8" x 1 1/2".
Skull – Chrome
91718-02 Size 3 5/8" x 3".
Skull – Antique Nickel
91720-02 Size 3 5/8" x 3".
Skull with Wings – Chrome
91723-02 Size 5" x 1 1/2". C. CHROME BACKREST MOUNT – MINI C. CHROME BACKREST MOUNT – SHORT
(SHOWN WITH DECORATIVE MEDALLION
Skull with Wings – Antique Nickel OVAL WITH BAR & SHIELD)
91732-02 Size 5" x 1 1/2".
Bar & Shield with Wings – Chrome
91745-02 Size 4" x 1 1/2".
Luggage Racks
A. TWO-UP SPORT LUGGAGE RACK* – CHROME
A sleek, chrome-plated rack that complements the lines
of your motorcycle. Works with both Detachable and
Rigid Mounted Sideplates.
53713-96 Fits all Softail® models with Detachable
Sideplates or Rigid Mount Sideplates and
’04 XL models equipped with Detachable
Sideplates (except models equipped with
Mini Rail Sissy Bar Upright or Short Rail
Upright). (Does not fit Softail models
equipped with one-piece welded
sissy bar and sideplates.)
53866-00 Fits ’90-’03 XL models with Detachable
Sideplate Kit P/N 53545-95. ’82-’03 XL
models with Rigid-Mount Sideplate Kit
P/Ns 52806-94B or 52782-82B; ’82-’94
FXR models with Rigid Sideplate Kit P/N
52781-82B (except FXRS-CONV and
FXRT). Fits ’96-’01 Dyna models (except
FXDWG). All ’96-’01 Dyna models
equipped with Rigid Mount Sideplates
require the separate purchase of Luggage
Rack Adapter Kit P/N 53828-00. Also fits
’99-’00 FXR models. (Does not fit FXRS-
CONV or FXRT models.)
DETACHABLE DOCKING
HARDWARE KIT (not shown)
Required when installing detachable sideplates P/N
53913-04 with Saddlebag P/N 53050-04 or 53148-04.
53544-04 Fits ’04 XL models. Required
when installing detachable
accessories with Saddlebag
P/N 53050-04 or 53148-04.
B. SPORTSTER ® PREMIUM
HARNESS LEATHER SADDLEBAGS
These saddlebags are constructed from premium
10-oz. leather with thermoformed backs for added
shape retention. Features quick-disconnect buckles.
These easy-to-install bags come complete with all
hardware and reflectors.
90342-04 Fits ’94-later XL models (except
XL1200S, 883R, and models equipped
with rear axle covers, flat lens turn signals,
or accessory bullet style turn signals A. SYNTHETIC LEATHER SADDLEBAGS FOR SPORTSTER MODELS
P/Ns 68005-99 and 68637-99). ’94-’03
models require separate purchase of
Directional Relocation Kit P/N 68485-04.
(Will work with Detachable Sideplates on
’94-’03 models when used with Hardware
Kit P/N 90465-98A or 53532-02.) (Will not
work with Detachable Sideplates
on ’04-later models.)
Not shown:
SPORTSTER DOCKING AND B. SPORTSTER PREMIUM HARNESS LEATHER SADDLEBAGS
DIRECTIONAL RELOCATION KIT
This kit was developed specifically for the rider who
wishes to install Detachables with the popular
saddlebag kit P/Ns 90598-04 and 90342-04, providing
the proper spacing necessary to install these bags with
Detachables.
90465-98A Fits ’94-’01 XL models (except
XL1200S). (Does not fit with
Flat Lens Turn Signal,
P/Ns 68431-95 and 68432-95
or Bullet Style Turn Signals
P/N 68005-99 and 68637-99).
53532-02 Fits ’02-’03 XL models (except
XL1200S and 883R).
THROWOVER SADDLEBAGS
FOR SPORTSTER ® MODELS
Combining the convenience of a throw-over bag with
the look and feel of quality leather or nylon, these
detachable bags are ideal for use on the Sportster Sport
E. LEATHER THROWOVER SADDLEBAGS F. NYLON THROWOVER SADDLEBAGS models, and make a great addition to any XL. A
FOR SPORTSTER MODELS FOR SPORTSTER MODELS polyethylene liner helps prevent water intrusion on long
trips and helps the bag hold its shape when you pack
light.
Leather
E. 91464-00 Fits ’94-’03 XL models with two-up
seats and passenger footpegs. Solo
seats require installation of passenger
pillion and rear footpegs. Does
not fit with detachables.
Nylon
F. 91224-00 Fits ’94-’03 XL models with two-up
seats and passenger footpegs. Solo
seats will require installation of passenger
pillion and rear footpegs. Does
not fit with detachables.
SADDLEBAG LINERS
Water-resistant liners make packing easy. Feature inner
pockets for extra storage and an embroidered “Bar &
Shield” logo.
G. 91957-97 Fits Heritage Softail® Classic
and Heritage Springer® style saddlebags
and Sportster Leather Saddlebags
P/N 90598-04. (Also fits P/Ns 90130-00A,
90835-90C, 90978-97, 90342-04,
91043-97, 90837-87A, 90970-95
and 90300-98.) (pair)
H. 91959-97 Fits saddlebags P/Ns 90307-98,
90680-97, 91010-91A, 91004-94,
90711-97, 90571-94,
90300-98. (pair)
NOTE: Sissy Bar Bag will not work with Mini Rail Sissy
Bar Upright, Short Rail Sissy Bar Upright, VRSC Upright
or FXSTD Upright.
G. SPORTSTER COLOUR-MATCHED
FRONT SPOILER*
This colour-matched spoiler is manufactured from
injection-moulded, high impact composite materials
and styled with a racy, custom appearance. It is finished
with the same high quality paint as all stock Harley-
Davidson® products to match your original factory-
applied colour. The spoiler is also available primed,
ready for your custom paint design. Each spoiler
includes the necessary hardware for quick and easy
installation.
Fits ’84 1/2-’03 XL models. Will fit XL models with
Engine Guard P/N 49018-88B. Will not fit with Voltage
Regulator Cover P/N 74579-97, unless also equipped
with the Sport Front Fender and the additional purchase
of Voltage Regulator Hardware Kit P/N 74568-98.
NEW
Sportster Bobtail Sportster Bobtail Large Fuel Tank Large Fuel Tank
Fender Fender with Decal with Medallion
Fits ’99-’03 XL models Fits ’04 XL models Fits ’04 XL models Fits ’04 XL models
Solid Colour – No Pinstripes
Primed 60025-01 59985-04
Vivid Black 60025-01DH 60052-04DH 62732-04DH
Luxury Blue 60025-01XE 60052-04XE
Brilliant Silver 60052-04BHT 62732-04BHT
Sierra Red 60052-04BHS 62732-04BHS
Luxury Teal 60052-04BHV 62732-04BHV
Smokey Gold 60052-04BJL 62732-04BJL
Lava Red Sunglo 60052-04BJK 62732-04BJK
Real Red 60025-01BBN 60052-04BBN 62732-04BBN
Impact Blue 60052-04BBP 62732-04BBP
Birch White 60052-04AV 62732-04AV
Racing Orange 60052-04NZ 62732-04NZ
Glacier White Pearl 60052-04BHX
White Pearl 60025-01ZB
Sterling Silver 60025-03BDP
Gunmetal Pearl 60025-03BDT
Jade Sunglo 60025-01XF
Luxury Rich Red 60025-01ZQ
Concord Purple 60025-01QH
Nugget Yellow 60025-01DG
Real Teal 60025-01XG
SPORTSTER CHROME
PRIMARY CHAIN COVER KIT 7
Kit includes chrome primary chain cover, chrome derby
cover, chrome primary chain inspection cover, and
gaskets and seals as needed. 5
25461-04 Fits ’04 XL models.
Stock on ’04 XL1200C.
NEW
NEW
B. FLAMES COLLECTION
Ever since they began emerging on fuel tanks a few
decades ago, flames have been a symbol of custom
styling. Now, Harley-Davidson continues the tradition 2
with the Flames Collection. See Multi-Fit section for 3
additional collection options.
1. 29824-04 Air Cleaner Trim.
Fits ’04 XL models.
2. 25125-04 Derby Cover.
Fits ’04 XL models. A. H-D MOTOR COMPANY COLLECTION
3. 32571-98 Timer Cover.
Fits models with horizontal
holes on timer cover.
4. 99668-04 Fuel Cap Medallion.
Fits ’04 XL models. NEW NEW
5. 44623-04 Brake Caliper Insert. 2
Fits front and rear calipers
on ’04 XL models.
B. FLAMES COLLECTION
NEW NEW
1
NEW NEW
Cooling Fins
Turbulators
(Inside cooler)
Turbulators disperse and mix Coolers without the Turbulator
oil inside cooler to provide system allow oil to flow only in
more efficient cooling a straight path. Oil does not
capabilities. The cooler oil is mix and the cooler oil remains
not allowed to remain along along the outer boundaries,
the boundaries of the flow while the hotter oil remains
tube as in conventional along the centre path of flow.
coolers. Without the mixing effects of
the Turbulators, the
conventional oil cooler
provides less efficient cooling
capabilities.
B. SPORTSTER CHROME OIL COOLER COVER
Add a beautiful accent to your Sportster Premium Oil
Cooler. This chrome cover is designed to allow proper air
flow through the integrated duct work. Requires
Permatex® clear silicon RTV adhesive for installation. A. SPORTSTER PREMIUM OIL COOLER
74627-01 Fits ’82-later Sportster models
equipped with Premium
Oil Cooler P/N 62996-04.
D. THERMOSTAT KIT
Thermostat features an advanced design that makes it
smaller so that it can be hidden after installation. A. SPORTSTER PREMIUM OIL COOLER B. SPORTSTER CHROME OIL COOLER COVER
Thermostat is designed to allow oil flow to the cooler
starting at 180O Fahrenheit, while restricting oil flow to
the cooler when oil temperature falls below 180O
Fahrenheit. Reliable function provides additional
confidence to the rider who adds an oil cooler to their
riding application.
62878-99 Fits all models with oil coolers.
NEW NEW
Inset:
CHROME IGNITION MODULE
COVER SCREW KIT
94550-98 Fits ’98-’03 XL models.
94523-95 Fits ’82-’97 XL models.
NEW
NEW
D. SPORTSTER ® HORN COVER A. CHROME IGNITION SWITCH COVER B. CHROME IGNITION SWITCH COVER
Chrome-plated ABS cover with “Bar & Shield” logo
simply snaps onto existing horn. Looks great.
69038-88TA Fits ’86-’93 XL883 and
’83-’84 XR 1000 models.
G. XL883R STYLED AIR CLEANER KIT C. AIR WING HORN COVER D. SPORTSTER HORN COVER
Add race-track looks to your Sportster®. This black air
cleaner is stock on the XL883R, and features a race-
inspired insert to show you’re serious about performance.
29500-02 Fits ’96-’03 XL models.
Stock on 883R models. NEW
H. OVAL AIR CLEANER TRIM
Aluminium trim plate available in subtle grid pattern on
black background with “Sportster” logo.
1. 29102-86 ”Sportster” script.
Fits ’66-’03 XL models.
2. 29103-83 ”H-D Motor Co”. logo.
Fits ’66-’03 XL models.
E. HIGH OUTPUT HORN FOR SPORTSTER MODELS F. 883 SPORTSTER CHROME HORN KIT
J. CHROME FORK AXLE RETAINER NUT KIT K. CHROME FORK SLIDER DRAIN SCREW KIT
98 Sportster ®
E. CHROME SWINGARM
NEW
Shown with:
CHROME CALIPER BOLT COVER KIT
Cover your caliper mounting bolts in chrome. These
easy-to-install chrome covers are held firmly in place
with a spring steel clip, and are styled to match the
Chrome Rocker Box and Headbolt Covers. Each kit
includes four bolt covers. NOTE: Each front caliper has
four exposed bolts (two if a Chrome Caliper Cover is
installed), and rear caliper has three exposed bolts.
43824-03 Fits all ’00-later front and
rear 12-Point caliper mounting
bolts (except on Springer®
model front calipers).
NEW
1
*WARNING: Engine guards may provide limited
leg and cosmetic vehicle protection under
unique circumstances (fall over while stopped,
very low speed slide). They are not made nor
intended to provide protection from bodily injury
in a collision with another vehicle or any other
object.
Shown with:
BILLET FOOTPEGS AND BILLET SHIFTER PEGS
These high quality, dramatic custom pegs are
machined from premium 6061-T6 aluminium, then
polished and chrome plated for long-lasting good
looks. To give you more options, the chromed, billet
aluminium shifter pegs and footpegs are offered in two
different combinations of knurling and rubber band.
Shifter pegs fit all models. Footpegs fit all H-D® male-
mount style footpeg supports.
Wide Band
50986-99 Small Diameter
Billet Footpegs. (pair)
49256-99 Billet Shifter Peg.
1
*WARNING: Installation of accessory Forward
Control Kits may affect cornering clearance. This
could distract the rider, causing loss of control,
resulting in death or serious injury.
Shown with:
CHROME BILLET FOOTPEGS AND SHIFTER PEG
E. SPORTSTER CHROME GEAR SHIFT LEVER F. SPORTSTER BILLET STYLE SHIFT LEVER Popular billet footpegs now available in this striking
chrome version. These high-grade Chrome Billet
Aluminium Footpegs add a sporty look and feature a
two-piece construction that makes correct footpad
orientation easier. Made in the U.S.A.
49234-98 Fits all H-D® male-mount
style footpeg supports
1 2 (except VRSC models.) (pair)
1 2
49238-98 Shifter Peg.
Fits all models.
1 L. CHROME PASSENGER
FOOTPEG MOUNTING KIT
50610-86T Fits ’82-’03 XL models.
NEW
Shown with:
CHROME SWITCH CAP KIT
These Chrome Switch Cap Kits will add style to one of
the most visible areas of your bike, the switches.
Shaped for the same ergonomic feel as the Original
Equipment hand control switches, these caps replace
the stock black caps without re-wiring. The chrome
switch caps complement other chrome hand control
accessories (Chrome Master Cylinder Kit, Chrome Hand
Levers, Chrome Switch Housings, and Chrome Master
Cylinder Cover) to complete the custom look.
71804-03 Fits ’96-later XL, Dyna,
Softail and FLHR/I models,
’02-later VRSC models, and
’98-’01 FLHRC/I models.
E. CHROME HAND CONTROL LEVER KIT F. CHROME SWITCH HOUSING KIT
G. CHROME MASTER CYLINDER COVER
(SHOWN WITH CHROME SWITCH CAPS)
Includes one chrome-plated cover, gasket, and decal.
Easily installed with included stainless steel screws.
42313-04 Fits ’04-later XL models.
NEW
H. CHROME MASTER CYLINDER COVER
Includes one chrome-plated cover, gasket, sight glass
and decal. Easily installed with included stainless
steel screws.
45078-96A Fits ’96-’03 XL models
and ’96-later VRSC, Dyna, Softail
and Touring models. Also fits clutch
master cylinder on models
equipped with hydraulic clutch.
Polished Master Cylinder Cover Screw Kit
(not shown)
94632-01 Fits Chrome Master
Cylinder Cover Kits P/N
45078-96 and 45149-99.
J. CHROME SPEEDOMETER/TACHOMETER
BRACKET KIT
Kit includes chrome dual gauge mounting bracket and
chrome speedometer and tachometer backplates.
67294-95A Fits ’99-later FXDX, ’01-’03 FXDXT,
’95-later FXDS-CONV and ’95-later
XL1200 models (except XL1200 Custom).
Will also fit ’95-later XL883, Deluxe
and Hugger®, and FXD Super
Glide® models that have been
upgraded to dual gauges.
Suspension Kits
A. LOW-SUSPENSION FORK KIT*
This Low-Suspension Fork Kit will shorten an ’89-later
standard Sportster front fork by about 2 inches. Use
along with the 11.75-inch rear shocks to create the
same saddle height as the current Sportster® Hugger®.
This kit includes components required to lower the
Sportster front end in addition to a shorter jiffy stand;
’89-’93 models require the separate purchase and
installation of two Slider Tubes P/N 45395-92.
Low-Suspension Fork Kit
45480-94 Fits ’89-’03 XL883 Standard, Deluxe,
and XL1200. (Stock on the ’92-later
Hugger and ’96-’98 XL Custom. Will not
fit ’88 XL because of the different
jiffy stand mounting system.)
Slider Tubes
Two required on ’89-’93 models. To be used with
Low-Suspension Fork Kit P/N 45480-94.
45395-92
NEW