Professional Documents
Culture Documents
CATALOGUE
1.0.
BENCH MOTORS - SPINDLE -
44
SPECIAL TOOLS FOR
DRILLING JIGS
2.0. INSPECTION LIGHT 46
WOODWIND INSTRUMENTS
3.0. HOLDERS - COPYING JIG 48 PAGE 44-80
4.0. GENERAL TOOLS - TAPS - DIES 50
5.0. CUTTERS - REAMERS - FILES - SAWS 54
6.0. REAMERS 58
SPECIAL PLIERS FOR
7.0. 59
WOODWIND INSTRUMENTS
SPECIAL TOOLS FOR CLARINET -
8.0. 65
OBOE - BASSOON
9.0. SPECIAL TOOLS FOR FLUTE 69
10.0. SPECIAL TOOLS FOR SAXOPHONE 75
ORDERINFORMATION:
All prices in our price list are EUR, ex-works Neustadt/Aisch, Germany, and do not include costs of packing and shipment.
The prices and specifications are subject to change without notice. However, we will gladly furnish you with a guaranteed
quotation if you ask for it when or before ordering. Errors excepted.
Terms of payment:
Unless an open account has been established, customers will be supplied cash in advance (CIA).
Payment can be made by bank transfer or international bankers draft. Please do not pay by personal cheque.
We accept VISA or MASTERCARD (till 1.000,00 €). We need: card name /card no/ expiry date.
Additional information:
While we provide recommendations for the use and application of our products, the determination as to whether
a product is safe, appropriate for a particular use, or will provide the desired result, is the sole responsibility of the buyer.
Buyer assumes all risk of use.
-011A- oval dent balls, set of 49 pieces, 8-20mm dia. in 0.25mm steps, with bore.
-011AG- oval dent balls, same as 011A, except all balls of a diameter of 12mm and more
with M5 and M6 thread.
With threaded balls you are more flexible in use-they can be
screwed on rods, e.g. no. 024 or no. 015.
011A-011AG
-011B- oval dent balls, set of 20 pieces, 20.5-30mm dia. in 0.5 mm steps, with bore.
30mm ball with M10 thread for screwing on rods.
-011BG- same as 011B, except all balls with M8 and M10 thread.
-011BE- oval dent balls, set of 20 pieces, 20.25-29.75mm dia. in 0.5mm steps, 011B-011BG
with bore. This set supplements no 011B to a 40 piece
set in 0.25mm steps from 20.0-30.0mm.
011BEG- oval dent balls, same as 011BE, except all balls with M8 thread
-012EG- oval dent balls, set of 15 pieces, 31-40mm dia. in 1mm, and dia. 40-50mm
in 2mm steps, all balls with M10 thread. 012EG
-012A- oval dent balls, set of 5 pieces, 52, 54, 56, 58, 60 mm dia.,
all balls with M12 thread.
012A
012G
-1-
E-Mail: boehmtools@t-online.de web: www.boehmtools.de
-026/0- round dent balls, set of 41 pieces, 10-20mm dia. in 0.25 steps,
threaded M5/M6 and with hole so you can use them with 021-026
dent rod no.016 or threaded rods.
-026/1- round dent balls, set of 11 pieces, 20-30mm dia. in 1mm steps,
threaded M8.
-026/2- round dent balls, set of 5 pieces, 32-40mm dia. in 2mm steps,
threaded M10
023/1+2
-023/1K-TR- dent rod with joint M5, with 6 pc. hardened balls 023/1K-TR
dia. 11,0-dia 11,5mm for trumpet/flugelhorn
-2-
E-Mail: boehmtools@t-online.de web: www.boehmtools.de
016-016P
PENCIL MAGNET
Very useful for finding and fixing the location
of the dent balls in the instrument.
-025FL/D08- flexible dent rod dia. 8.5 x 1500mm, with cable clamp
-025FL/D08ES- replacement cable D1,5x1800mm
-3-
E-Mail: boehmtools@t-online.de web: www.boehmtools.de
BENCH VISE
Forged completely from steel, with 360° revolving plate, may be fixed
in any position; with adjustable “V” nest. A robust vise like this is a
necessity in every repair shop.
152DP/1
-4-
E-Mail: boehmtools@t-online.de web: www.boehmtools.de
191
192
-5-
E-Mail: boehmtools@t-online.de web: www.boehmtools.de
-027/1- straight rod, 15.0mm dia. x 1000mm long, with M8 and M10 thread.
-027/2- straight rod, 17.0mm dia. x 1000mm long, with M10 and M12 thread.
-027/3- straight rod, 20.0mm dia. x 1000mm long, with M10 and M12 thread.
CYLINDRICAL RODS
All our cylindrical rods and pins are made of chrome-vanadium steel.
-151- cylindrical rods, both ends rounded off, polished, set of 8 pieces,
9 - 25mm dia., approx. 660mm long. A tried and tested collection of the
most commonly used sizes (9, 11, 13, 15, 17, 19, 22, 25mm dia.).
-154- cylindrical trombone rods, approx. 1000mm long, rounded off at both
ends. Set of 11 pieces, 10.5-15.5mm dia., in 0.5mm steps. (Cylindrical bolts
for trombone slides –see chapter “10.0. Tools for trombones”)
151
-6-
272
-176A- tapered mandrel part for F-tuba, taper ca. dia. 65x dia. 130mm,
700mm long, with squared-off extension that may
be screwed on to the workbench or gripped in a vise.
-177A- tapered mandrel part for B-tuba, taper ca. dia. 100x dia 170mm,
1000mm long. Can be fixed like 176A.
176A-177A Nr.171-175
170
-7-
282
131-137
131-137
-8-
E-Mail: boehmtools@t-online.de web: www.boehmtools.de
-041- steel hammers, hardened, polished, set of 11 pieces. Also available singly.
For order numbers see below (for example no 041/2).
041/1-11
NYLON HAMMER
Recoil-free hammer, with insert of wear-resistant nylon.
-9-
E-Mail: boehmtools@t-online.de web: www.boehmtools.de
BENCH ANVIL
Tool for repairing and rivetting braces.
Smooth even surface for filing and hammering.
“AUSPOCHEISEN”
A real classic for the instrumentmaker is back on the market again.
These tools are used for rounding bent instrument parts,
e.g. bell bows. Tubing must still be filled with lead, you put this tubing
in the tool and hammer on it (auspochen) to get rid of
the creases and to round it. Repair technicians use “Auspocheisen“ with
bent rods or balls in the tubing to remove dents.
031 032
for inside for outside
-10-
E-Mail: boehmtools@t-online.de web: www.boehmtools.de
HOOK BURNISHERS
One-sided hook burnishers, forged from tooling steel, polished. Set of 6 pieces suitable
for trumpet through flugelhorn and trombone. Order the set or individually!
062
071/1-6
STRAIGHT BURNISHERS
All burnishers are made from the best filing material,
smooth-finished and polished.
-11-
E-Mail: boehmtools@t-online.de web: www.boehmtools.de
Caution: The magnet in 452SM40 is even stronger – so you must be even more careful!
-12-
E-Mail: boehmtools@t-online.de web: www.boehmtools.de
451/K2
-451/K5- Supplementary set of balls, hardened,
5 pc, dia 50-70mm, in steps of 5mm
(without thread)
SAFETY WARNING
• Strong magnets are used!
• The tool must be kept away (at least 2m) from electronic and
• mechanical measuring devices and also from computers, monitors, tablets, sticks,
• video tapes, bank cards etc.
• People with a pace maker must not use this tool and must stay out of the magnetic field.
• The same may apply to people using other medical devices, e.g. hearing aids.
• Remove ferrous parts and bits from your work area before using the tool.
-13-
E-Mail: boehmtools@t-online.de web: www.boehmtools.de
The bodies of all our dent rollers are hardened and with ball bearings!
066BR
066RTB
-14-
E-Mail: boehmtools@t-online.de web: www.boehmtools.de
076/2
067
-15-
E-Mail: boehmtools@t-online.de web: www.boehmtools.de
068/1
Dent rollers, for tightening in vise; can also be used as a rolling support
for handrollers nos. 064A, 064AS, 065.
069A/1 069A/1-3
067KS
-16-
E-Mail: boehmtools@t-online.de web: www.boehmtools.de
091B 091D
091C
-17-
E-Mail: boehmtools@t-online.de web: www.boehmtools.de
Examples of sets:
trombone slides (tenor B up to medium large): 146/3 + 147/D 12.7 13.3 13.7 14.3mm
trombone slides (tenor large through bass trombone): 146/3 + 147/D 14.9 15.3mm
tuning slide inner tube (trumpet through French horn): 146/1 + 146/2 + 147/D 11.0 11.6 12.0mm
tuning slide outer tube (trumpet through French horn): 146/1 + 146/2 + 147/D 12.0 12.4 12.7 13.0mm
-18-
E-Mail: boehmtools@t-online.de web: www.boehmtools.de
-19-
E-Mail: boehmtools@t-online.de web: www.boehmtools.de
123/1
MOUTHPIPE REAMERS
Mouthpipe reamers are used to correct the inside taper of mouthpipes
to ensure the perfect fit of the mouthpiece.
All reamers have a taper of 1:20, and they are hardened and finished.
-20-
E-Mail: boehmtools@t-online.de web: www.boehmtools.de
-313/D- additional clamp for no. 313, 3-12mm dia., in 0.5mm steps.
Please indicate required size.
-301- small dent rods, set of 5 pc., dia. 6mm, 300mm long
301
SHRINKING PLIERS
These pliers are used for crimping the connecting
rod in valve sections.
-21-
E-Mail: boehmtools@t-online.de web: www.boehmtools.de
SLIDE HOLDER
Our slide holder is quickly and easily fixed to the workbench and holds the slide bow
securely during polishing.
It is adjustable, with locking lever -therefore suitable for different widths.
The holding pins are interchangeable.
Interchangeable holding pins with other diameters are available upon request.
Please specify the diameter and the maximum distance required between the pins.
-311/10- pulling tool for stop arm, for stop arms with
a maximum diameter of 24mm (trumpet,
flugelhorn, French horn, tenor horn, baritone).
311/10
-22-
E-Mail: boehmtools@t-online.de web: www.boehmtools.de
LAPPING COMPOUND
Heavy viscosity, oil-based, emulsifiable (water-soluble) compound.
Non-Embedding, safe for soft metal. EP treated, anti-scuff formula. Water-based or solvent cleanup.
312/10 312/10
427/2
-23-
E-Mail: boehmtools@t-online.de web: www.boehmtools.de
-316A- expandable valve casing mandrel, brass, set of 2 pieces, for trumpet, cornet, flugelhorn,
16.0-18.0mm dia.
316/1-2
317/5
-24-
E-Mail: boehmtools@t-online.de web: www.boehmtools.de
302
318
317
-25-
E-Mail: boehmtools@t-online.de web: www.boehmtools.de
066TR
-26-
E-Mail: boehmtools@t-online.de web: www.boehmtools.de
-146/3- rod for trombone slides, 850mm long, with stop ring.
When ordering please specify: number of rod (146/3) and diameter(s) of the ball(s).
Examples of sets:
trombone slides (tenor B up to medium large): 146/3 + 147/D 12.7 13.3 13.7 14.3mm
trombone slides (tenor large through bass trombone): 146/3 + 147/D 14.9 15.3mm
-27-
E-Mail: boehmtools@t-online.de web: www.boehmtools.de
HOLDING DISC
This disc is a holder for brass instruments
with a bell diameter up to 320mm (trumpet
through French horn). Six rubber-protected
adjustable clamps ensure a firm and non-
marring grip of the bell rim.
Can be turned radially and is firmly and quickly
locked in position by a lever.
Our holding disc greatly eases polishing,
inspection and general repairs.
Ideal for French horn! 320/1
-320/1- holding disc, with 6 clamps, with square base for clamping
in vise or no. 170; adjustable in one axis (radially), 1 lever.
SLIDE HOLDER
Our slide holder is quickly and easily fixed to the workbench and holds
the slide bow securely during polishing.
It is adjustable, with locking lever -therefore suitable for different widths.
The holding pins are interchangeable.
318
-28-
E-Mail: boehmtools@t-online.de web: www.boehmtools.de
321/1 321/2
321/4
321/5
321/6
321/3
Nos. 321/1-6 can be fixed in a vise or in our special holding vise no. 170 (high stability!).
See “2.0. Dent repair in the bell section”.
-29-
E-Mail: boehmtools@t-online.de web: www.boehmtools.de
SLIDE IRON
This slide iron is used for extracting tight slides. For narrow bows.
It is tapered at both ends and rounded off.
315/5
268/200
-651/1- duck bill pliers, extra wide jaws, tool length 160 mm.
651/1
-30-
E-Mail: boehmtools@t-online.de web: www.boehmtools.de
PARALLEL PLIERS
263 – 264/MS
PARALLEL PLIERS WITH BRACES
-265/1- flat nose pliers with brass-protected jaws, 180mm long. 265/1-2
The jaws remain parallel for opening up to 2mm.
435
-31-
E-Mail: boehmtools@t-online.de web: www.boehmtools.de
SHRINKING PLIERS
These pliers are used for crimping the connecting rod in valve sections.
562H/1-0-7
METAL CUTTERS
784/260
780/140
-32-
E-Mail: boehmtools@t-online.de web: www.boehmtools.de
411/DP30S
411/6
BUFFING WHEELS
-33-
E-Mail: boehmtools@t-online.de web: www.boehmtools.de
For more information about the machines on this page please contact us,
you will get a detailed offer. Delivery only inside the EU.
411/10AG
BUFFING WHEELS
BUFFING COMPOUND
WHEEL DRESSER
Tool for dressing hard buffing wheels
416
-34-
E-Mail: boehmtools@t-online.de web: www.boehmtools.de
413
CLEANING SYSTEM
752
EMERY CLOTH
Economical rolls, 50m long, 25mm wide. Particularly pliant, dense,
brown emery fabric. Available in 7 grits, K120 to K600.
750
751
-35-
E-Mail: boehmtools@t-online.de web: www.boehmtools.de
363/1-2
-36-
E-Mail: boehmtools@t-online.de web: www.boehmtools.de
LEAD-POURING LADLE
HAND PRESS
A very precise small press for squeezing, pressing, punching, riveting, etc.
Hardened and finished spindle, adjustable working height from 40 - 200 mm by means
of a threaded spindle.
This hand press is perfectly suited to our shrinking tools no. 573/4 and 5.
441
-37-
E-Mail: boehmtools@t-online.de web: www.boehmtools.de
204A
201A
CALIBRATION MOLDS
Manufacturing of calibration molds for the production of tuning curves,
half tone arches and horn loops (see picture)
according to your specifications (drawing or pattern).
We also produce the corresponding bending molds
-38-
E-Mail: boehmtools@t-online.de web: www.boehmtools.de
427/2
-39-
E-Mail: boehmtools@t-online.de web: www.boehmtools.de
TRIANGULAR SCRAPERS
HOOK SCRAPERS
-241- hook scrapers, set of 5 pc., width approx. 3, 4, 5, 6.5 and 8mm.
Hook scrapers are curved to allow you to remove excess solder around
tubular joints, guard wires etc.. Also available singly.
DEBURRING TOOLS
All deburring tools made from high speed steel.
SPECIAL SCRAPERS
-40-
E-Mail: boehmtools@t-online.de web: www.boehmtools.de
ROUND FILES
-740- precision round files, 740
tapering point
-150mm long: 6mm dia.
-200mm long: 8mm dia. length/cut length/cut
-150mm/0 -200mm/1
-150mm/2 -200mm/3
-150mm/3
FLAT FILES
-741- precision flat files,
3 sides toothed 741
-150mm long: l9x4mm
-200mm long: 22x5mm. length/cut length/cut length/cut
-250mm long: 26x6.5mm -150mm/0 -200mm/1 -250mm/0
-150mm/1 -200mm/2 -250mm/3
-150mm/3 -200mm/4 -250mm/4
-150mm/4
HALFROUND FILES
-742- precision half round files,
tapering point 742
-150mm long: 15x4.5mm
-200mm long: 2lx6mm length/cut length/cut length/cut
-250mm long: 25x7.5mm -150mm/0 -200mm/1 -250mm/0
-150mm/1 -200mm/2 -250mm/1
-150mm/3 -200mm/3
-150mm/5 -200mm/4
FILE HANDLES
-41-
E-Mail: boehmtools@t-online.de web: www.boehmtools.de
SPECIAL FILES
-741S/150/0- precision flat file, only 7mm wide, 150mm long, cut 0
-741S/150/3- precision flat file, only 7mm wide, 150mm long, cut 3 741S 742S
-742S/150/0- precision half round file, only 10mm wide, 150mm long, cut 0
-742S/150/2- precision half round file, only 10mm wide, 150mm long, cut 2
-744/200/3- flat file with rounded off edges, only 3mm thick, 200mm long, cut 3
-744/250/3- flat file with rounded off edges, only 3mm thick. 250mm long, cut 3 744
FILE BRUSH
For cleaning files
CALIPERS
All calipers are of highest accuracy.
COMPASS
762/0-25
-765/150- compass (dividers), opening width up to 95mm,
supplied with 2 replacement pins.
765/150
THREAD GAUGE
705/15
-42-
E-Mail: boehmtools@t-online.de web: www.boehmtools.de
ADJUSTABLE REAMERS
Adjustable reamers with HSS cutters are used for reaming cylindrical bores in woodwind and brass instruments.
Work on brass instruments (valve casings) should be done very carefully, as the tool can be easily tilted.
Each above reamer can be supplied with an extension rod (removable or fixed) on special order.
CENTER DRILL
Made from high speed steel, for center drilling.
DRILL SET
High speed steel drill set, in metal case.
701/1-6
734
722
-43-
2
BENCH MOTORS
Our stable bench motors with hollow shaft are of the highest quality and much valued in
the industry. One end is extended, with a hand brake and a bored drill chuck.
-505H/1- bench motor with hollow shaft, 220 V, 1/4 hp, two speeds
1400/2800 rpm, complete with bored drill chuck
(0.5 - 8mm diameter) and brake disc.
-505H/2- bench motor with hollow shaft, as above, except has speeds
700/1400 rpm.
SPINDLE
The spindle can be driven by a flywheel or can be combined with a motor.
-501/1- replacement drill chuck for no. 501 and 505, with hollow bore.
501
-505/R- bench motor with hollow shaft, 220 V, 1/4 hp, adjustable running speed from 250 - 1300 RPM.
The combination with a revcounter allows you to work at any speed between 250 and 1300 RPM.
Low speeds enable you to perform tricky jobs like cutting threads on shafts quickly and securely.
Complete with -bored drill chuck (0.5-8 mm diameter), -brake disc, - footswitch
(on/off and clockwise/counter-clockwise), revcounter.
505R
-44-
2
DRILLING JIGS
511A
-511A- post drilling jig, with 3 guide holders and 3 bushings, 1.6 mm diameter, 250 mm long.
The bushings are interchangeable -you can use different diameters with the same jig. (See 512A/1.4-2.2)
For clarinets and oboes.
512AK
ADDITIONAL BUSHINGS
To be used with no 511A and 512AK
-512A/D- bushings
available separately in:
dia. 1.4 - 2.5mm, 0,1mm steps
-582/1- drilling die for key pins, for drilling of rods and
tubes for the insertion of the cross-pin; complete
with 5 bushings (0.6, 0.7, 0.8, 0.9, 1.0 mm diameter),
bushings hardened and interchangeable.
-45-
2
-46-
2
-47-
2
575H 575H
555B-555K
-48-
2
551BZ
-551BZ- biaxial holding jig for woodwind instruments, for instrument parts from
150 to 380mm; complete with 3-jaw-chuck (opens up to 32mm dia.),
with scale ring 360°, with gear-rack-drive (toothed wheel), dial.
Holding jig for longer instrument parts on request.
551CZ
-551CZ- copying jig for clarinets, oboes and recorders, for instrument parts from
150mm to 380mm; double spindle, scale ring 360°, 3-jaw-chuck, gear-rack-drive (toothed wheel),
spring-mounted locating pin, dial; supplied with 1 metal tube for making a template.
Copying jig for longer instrument parts on request.
-49-
4
569/60K
722
CUTTING TOOLS
Forged cutters for punching and making disks
from cardboard, felt and similar material.
Use a soft pad (wood, plastic, leather) as surface.
716
-716- cutters, set of 19 pieces,
D 2.0 - 20.0mm in 1.0mm steps;
in pouch.
HOLLOW PUNCHES
New set for punching and making discs from cardboard, felt,
plastic, leather and similar material.
The difference between the sizes is 0,5mm.
Comes with plate, holder and brass guide for straight punching!
Use a soft pad (wood, plastic, leather) as surface.
734
-50-
4
SMALL BURNISHERS
These small burnishers are especially useful for smoothing out
dents in flutes.
089
LIVE CENTER
570A
KEY CLAMP
Made from hardwood, jaws with leather cover.
725
HAND VISE
Used for holding small pieces when drilling, milling,
grinding or polishing.
561
-51-
4
704-HSS 708-HSS
Taps Dies
millimeters
metric drill in
thread
for one
mm
die size in mm 704
thread
M1 0.25 0.75 16 x 5
M1,2 0.25 1.00 16 x 5
M1,4 0.30 1.10 16 x 5
M1,6 0.35 1.25 16 x 5
M1,7 0.35 1.30 16 x 5
M1,8 0.35 1.45 16 x 5
M2 0.40 1.60 16 x 5
M2,2 0.45 1.75 16 x 5
M2.3 0.40 1.90 16 x 5 708
M2,5 0.45 2.05 16 x 5
M2,6 0.45 2.10 16 x 5
M3 0.50 2.50 20 x 5
M3,5 0.60 2.90 20 x 5 704-HSS 708-HSS
M4 0.70 3.30 20 x 5 Taps Dies
M5 0.80 4.20 20 x 7 UNC threads thread dia. drill in
M6 1.00 5.00 20 x 7 die size in mm
thread per inch ca. in mm mm
M7 1.00 6.00 20 x 9 6-32 32 3.51 2.85 20 x 7
M8 1.25 680 20 x 9
UNC-taps: hand taps, set of 2 pc
Metric thread tap = 1 pc tap
TAP HANDLES
705/10
-52-
4
DIE HANDLES
710/1
SPECIAL SCRAPERS
-53-
4
544/6-8
POST MILLS
post mills HSS, without threaded rod.
592/1-4
-54-
4
566
TONE HOLE FILE 90°
For deburring tone hole rims (clarinets, oboes etc.),
finely-toothed, hardened, for tone-holes dia. 4mm to 20mm.
547/5
-55-
4
HINGE FILE
This round file is cylindrical along its entire
length. Ideal for filing hinge tubing.
563/1-4
SPECIAL FILES
These top-quality precision files with Swiss cut are narrow and slim and therefore ideal for work on woodwind keys.
748
SAW
731
-56-
4
-545- slotting saw for rods, for rods with 1.8 2.0,
2.2 2.4 2.5 2.8 3.0 mm diameter; complete
with distance disks and
2 saw blades, 0.4 mm and 0.5 mm thick.
545
-545/1ES- replacement saw blade HSS 0,4mm
-545/2ES- replacement saw blade HSS 0,5mm
SHRINKING TOOL
A handy tool that is used for shrinking hinge tubes.
This tool serves the same purpose as our swedging pliers (no 562H). Its advantage is that there is a collet chuck (clamp) for
any diameter, so that the risk of damaging the tube is minimized.
The exchangeable chucks are hardened and polished.
The tool can be hand-held or fixed in a vice.
-513/2- shrinking tool for hinge tubes, for flute, clarinet, oboe,
with 3 pieces collet chucks 3.2/3.5/3.7mm dia.
-57-
1
- for recorders
- for clarinets and oboes and bassoons
- for flutes and piccolos
- for chanters of bag pipes
-58-
E-Mail: boehmtools@t-online.de web: www.boehmtools.de
-514/2- spring replacing pliers, used for inserting the springs; jaws hardened.
-514/3- spring punching pliers, used for pushing out broken, stuck and rusted
springs, point hardened. Complete with additional 70 mm long hardened
point for places unreachable by jaws of pliers.
514/3
514/2
514/1
514/1
514/2
791/2
791/1 791/2
651/1
-59-
E-Mail: boehmtools@t-online.de web: www.boehmtools.de
652
655
655
682
-581- key pin removal pliers (parallel pliers), with 2 interchangeable brass anvils
and 2 interchangeable removal punches.
581
-60-
E-Mail: boehmtools@t-online.de web: www.boehmtools.de
SHRINKING PLIERS
Pliers with short, narrow jaws, for shrinking hinge tubes.
SHRINKING TOOL
A handy tool that is used for shrinking hinge tubes.
This tool serves the same purpose as our swedging pliers (no 562H). Its advantage is that there is a collet chuck (clamp) for
any diameter, so that the risk of damaging the tube is minimized.
The exchangeable chucks are hardened and polished.
The tool can be hand-held or fixed in a vice.
-513/2- shrinking tool for hinge tubes, for flute, clarinet, oboe,
with 3 pieces collet chucks 3.2 3.5 3.7mm dia.
513/2
To your attention:
If the hinge tube material is very thick, it is advisable to use
swedging pliers (no. 562H). When using the shrinking tool,
you must operate it very carefully.
692
-61-
E-Mail: boehmtools@t-online.de web: www.boehmtools.de
SWEDGING PLIERS
For holding rods while milling,
each with a longitudinal and transversal bore:
ROD PLIERS
These pliers are used for extracting and moving woodwind instrument rods (shafts):
518/5-6
-62-
E-Mail: boehmtools@t-online.de web: www.boehmtools.de
NEEDLE PLIERS
With long, slim, oval-pointed jaws, smooth inside.
770/1-2
268/200
792/160
SMALL PLIERS
Pliers with short, slim jaws, smooth inside. Very handy, chromium-plated.
-772/125- small pliers, short, flat jaws, tool length 125 mm.
-774/125- small pliers, round tip jaws, tool length 125 mm.
-776/125- small pliers, oval tip jaws, tool length 125 mm.
772/125
776/125 774/125
-63-
E-Mail: boehmtools@t-online.de web: www.boehmtools.de
PARALLEL PLIERS
263/1-3
-654- parallel pliers, 140mm long, smooth jaws, jaw width 5mm
654
PARALLEL PLIERS WITH PROTECTED JAWS
264/MS
787/130
-64-
E-Mail: boehmtools@t-online.de web: www.boehmtools.de
More sizes:
-531/D11- tone hole reamer 11mm dia., with handle
-531/D12- tone hole reamer 12mm dia., with handle
-531/D13- tone hole reamer 13mm dia., with handle
-531/D14- tone hole reamer 14mm dia., with handle
-531/D15- tone hole reamer 15mm dia., with handle
531
UNDERCUTTERS (TAPERED)
547/5
-65-
E-Mail: boehmtools@t-online.de web: www.boehmtools.de
534A
534B
DUCK BILL PLIERS FOR POINTED CUPS
-66-
E-Mail: boehmtools@t-online.de web: www.boehmtools.de
ADJUSTABLE REAMER
This reamer is used for re-reaming cylindrical bores.
The danger of misalignment is avoided through a centering 715A
spindle and guide pins.
573/4
573/5
-67-
E-Mail: boehmtools@t-online.de web: www.boehmtools.de
572/1-2
572/6
537/1
-68-
E-Mail: boehmtools@t-online.de web: www.boehmtools.de
554
585/5
-69-
E-Mail: boehmtools@t-online.de web: www.boehmtools.de
556-557
589AFL
-70-
E-Mail: boehmtools@t-online.de web: www.boehmtools.de
066KR-FL
-558- hand roller for rolling out dents in flutes,
with radius, hardened, ball-bearing mounted.
To be used with rod no. 556, 557 and 657/1.
558
558RS
558K
558P
-71-
E-Mail: boehmtools@t-online.de web: www.boehmtools.de
584/1
-684- dent tool for bent head joints, rod with joint,
with 6 balls dia. 18.0 – 18.5 mm
682
-581- key pin removal pliers (parallel pliers), with 2 interchangeable brass anvils and
2 interchangeable removal punches.
581
-72-
E-Mail: boehmtools@t-online.de web: www.boehmtools.de
588/5
655
588
PAD IRONING TOOLS
Made of rust-free, hardened spring steel – 0.5 mm thick.
These tools are used for smoothing the skin of pads.
-537/1- pad ironing tool, set of 5 pc., for flute, clarinet, oboe
537/1
583
-73-
E-Mail: boehmtools@t-online.de web: www.boehmtools.de
583/6A
587
-74-
E-Mail: boehmtools@t-online.de web: www.boehmtools.de
597/1-2
-599- sax dent balls, set of 3 pieces for alto, tenor and baritone.
-599/1- sax dent ball for alto, thread M10 and M12
-599/2- sax dent ball for tenor, thread M10 and M12
-599/3- sax dent ball for baritone thread M10 and M12 599
-598A- dent rods (threaded) for sax neck, with balls (threaded).
Set of 3 for alto and tenor sax.
The balls are mutually interchangeable. 598A
-75-
E-Mail: boehmtools@t-online.de web: www.boehmtools.de
-691AT/ESB- cone shaped dent balls, set of 3 pc, for baritone sax.
Enlarges set 691AT up to baritone sax (delivery without extension rod)
595/0-2
HOLDING VISE FOR TAPERED MANDRELS AND RODS
This stable vise firmly holds tapered mandrels and rods slightly at an upward angle,
thus making the work on the instrument easier for you. The use of this vise eliminates
any downward movement or yielding of the tool during operation.
170
-76-
E-Mail: boehmtools@t-online.de web: www.boehmtools.de
594/1-2
-537/2- pad ironing tool for saxophone (soprano to tenor), set of 7 pc.
-537/3- pad ironing tool for baritone saxophone, set of 2 pc.
(makes set 537/2 a complete set for soprano to baritone sax).
537/3
537/2
-77-
E-Mail: boehmtools@t-online.de web: www.boehmtools.de
-554- expander for saxophone necks (alto, tenor, baritone) and flutes.
690/1
-690/4- Additional sleeves for 690/1, 3pc dia. 22.0-23.0 for baritone
(no picture)
-690/5- Additional sleeves for 690/1, 4pc dia. 27.85-28.45mm, “Vintage” sizes
(no picture)
For shrinking Sopran-S please use shrinking tool no. 685 (for flutes) with smaller collets no. 685/1
(Please see “8,0. Special tools for Flute”).
-78-
E-Mail: boehmtools@t-online.de web: www.boehmtools.de
693
-79-
E-Mail: boehmtools@t-online.de web: www.boehmtools.de
SAXOPHONE DISC
This disc is a holder for saxophones (and other instruments with a bell diameter from 100mm to 160mm, trumpet to
flugelhorn) during repair work, polishing and inspection.
It can be turned radially and vertically and is firmly and quickly locked in position by two levers. Five rubber-protected
clamps ensure a firm and non-marring grip of the bell rim.
692
-80-
E-Mail: boehmtools@t-online.de web: www.boehmtools.de
Index
A compass 42
adapter for rotary valves 22 cone shaped dent balls 76
additional plastic roll 26 copying jig for woodwind instruments 49
adjustable cutter 67 cotton gloves 35
adjustable holder 29 cup rings for mouthpieces 19
adjustable reamer 43 cutting tool f. flute pad washers 74
adjusting pliers, brass protected 31 cutting tool for valve felts 24
adjusting pliers,smooth jaws, 30 / 63 cylindrical rods 6
Auspocheisen 10 D
automatic center punch 53 deburring tools for tubes 40
B dent balls 2
barrel holder for clarinet 68 dent balls for flute head 72
bell irons 8 dent balls for sax 75
bell irons for sax 77 dent removal ring for sax 77
bell irons, shovel shaped 7 dent remover for "Böhm"-flutes 74
bell mandrels 38 dent rod for sax neck 75
belt-sanding unit 36 dent rod with joint 2
bench anvil 10 dent tool for bent head joints 72
bench anvil 10 dent tools for mouthpiece shafts 19
bench vise 4 diagonal cutters 32 / 64
bending jigs 37 die handles 40 / 53
bent dent rods 5 dies HSS 52
bent dent rods 21 disc for saxophones 80
bent dent rods for sax 75 discs for sax tone holes and keys 79
bolts for trombone slides 26 dividers 42
boring cutter HSS 53 double handle burnisher 11
brass guard for valves 23 draw plate for flute head joint 69
buffers, set 3 pcs. 21 draw plates 17
buffing compound 34 drill set HSS 43
buffing machines 33 drilling device for key pins 45
buffing wheel arbor 36 drills HSS 45
buffing wheels 33 / 34 drills, long 45
burnisher 11 / 51 dust respirator 35
burnisher for flute 71 E
bushings 45 ejection pin for valves 23
C elastic sanding sponge 35
center drills 43 emery cloth 35
circular saw unit 36 emery cloth holder 35
clamb for boring cutters 53 end cutting pliers 32 / 64
clamping jig for woodwind instruments 48 expandable dent balls 18 / 27
cleaning rod for trombone slides 27 expandable dent balls for flute 70
73 hook burnisher 11
expander for open tone holes
expander for sax neck sopran 78 hook scrapers 40
extractor for clarinet thumb tubes 68 K
extractor unit 34 key clamb 51
F key pin removal pliers 60 / 72
file brush 42 L
files 41 / 42 / 56 lapping compound 23
flange, with drill chuck 36 lead melting ladle 37
flat nose pliers, brass protected 31 LED-inspection-lights 46
flat nose pliers, wide jaws 63 live center 51
flat-nose pliers 31 / 62 M
flexibel rod with cable clamp 3 magnetic burnisher 12
flexible dent rods 3/4 mandrels for flute 70 / 71
flexible plastic rod with holder 2 metal saw "Puk" 56
flute cup aligment tool 73 metal tube with adapter 6
G mill for trumpet mouthpipe 20
grooved dent balls 75 mini-scraper 67
H mouthpiece puller 19
hammer for guards 9 mouthpipe reamers 20
hammer with plastic head 10 multimotor 36
hand lathe tools HSS 40 / 53 N
hand press, 0,8t 37 needle pliers 63
hand roller for flute 71 nylon hammer 9
hand vise 32 / 51 O
handroller 14 / 15 oval dent balls 1
handroller for flute 71 P
handroller for guards 16 pad ironing tools 68 / 73
handroller with inserts 15 parallel bench vise 50
handroller, tapered, with extension 15 parallel pliers 31 / 64
handrollerwith removable handle 15 / 26 parallel pliers for grommets 60 / 72
hardened dent balls 2 pipe pliers, straight 32
holder f. flute+clarinet 48 pipe tongs with plastic jaws 22 / 31
holder for bell irons 8 pivot screw countersinks 54
holder for clarient joints 68 plate shears 32
holder for clarinet/oboe/flute 48 post drilling jig 45
holder for cylindrical reamers 55 post mills 54
holder for mouthpieces 68 precision mechanic pliers 63
holding disc with square 28 precision micrometer 42
holding jig for trumpet 25 / 28 pressing tool for solid hinge tubes 61 / 80
holding jigs for mouthpieces 19 propane burner, swiveling 39
holding vise 7 / 76 propane high-pressure tube 39
hole punch 50 propane soldering torch 39
hole punching tools 74 pulling tool for stop arm 22
hollow steel balls 13 push-back balls 1
E-Mail: boehmtools@t-online.de web: www.boehmtools.de
NOTIZEN
E-Mail: boehmtools@t-online.de web: www.boehmtools.de
An/to
JOSEF BÖHM e.K.
Spezialwerkzeuge für Holz-und Blechblasinstrumente Tel.: +49 - (0)9161/2635
Special tools for brass and woodwind instruments Fax.: +49 - (0)9161/7244
RIEDFELDER ORTSSTRASSE 43 e-mail: boehmtools@t-online.de
D-91413 NEUSTADT/AISCH, GERMANY web: www.boehmtools.de
Menge/ Kat. Nr/ Beschreibung/ Preis €
quantity cat. no. description price €
Telefon / phone / numéro de téléphone Fax / fax / fax E-Mail / e-mail / mail