Professional Documents
Culture Documents
Chemistry Paras
Chemistry Paras
Index
TOPIC PAGE NO.
Certificate 1
Acknowledgement 2
Introduction 3
Prevention 5
Treatment 7
Coupling Reaction 8
Experiment 9
Bibliography 12
Certificate
It has been certified that Paras Yadav studying in XII-A, during the
academic year 2017-2018 has completed the project on the study of
the effect of metal coupling on the rusting of iron and has given
satisfactory account of this in her project report.
Signature Signature
Acknowledgement
I would like to express my gratitude to Mr. Amarnath Sinha, our
chemistry teacher, whose help and encouragement made this
project possible.
I would also like to thanks to Mr. Nitin, the lab assistant for his
help during the completion of this project.
Paras Yadav
XII- A
Introduction
Metals and alloys undergo rusting and corrosion. The process by
which some metals when exposed to atmospheric condition i.e.
moist air, carbon dioxide form undesirable compounds on the
surface is known as corrosion. The compounds formed are usually
oxides. Rusting is also a type of corrosion but the term is restricted
to iron or products made from it. Iron is easily prone to rusting
making it surface rough. Chemically, rust is a hydrated ferric oxide.
Rust is formed by the redox reaction of iron and oxygen in the
presence of water or air moisture. Rust consists of hydrated iron
(III) oxides Fe2O3.nH2O and iron (III) oxide-hydroxide (FeO(OH),
Fe(OH)3).
Rust is another name for iron oxide, which occurs when iron or an
alloy that contains iron, like steel, is exposed to oxygen and
moisture for a long period of time. Over time, the oxygen combines
with the metal at an atomic level, forming a new compound called
an oxide and weakening the bonds of the metals itself.
Rusting may be explained by an electrochemical mechanism. In the
presence of moist air containing dissolved oxygen or carbon
dioxide, the commercial iron behaves as if composed of small
electrical cells. At anode of cell, iron passes into solution as ferrous
ions.
Fe Fe2+ + 2e-
The electrons from the above reaction move towards the cathode
and form hydroxyl ions
H2O + (O) + 2e- 2OH-
Under the influence of dissolved oxygen the ferrous ions and
hydroxyl ions interact to form rust, i.e., hydrated ferric oxide.
2Fe2+ + H2O + (O) 2Fe3+ + 2OH-
2Fe3+ + 6OH- Fe2O3.3H2O or 2Fe(OH)3
(Rust)
If supply of oxygen is limited the corrosion product may be black
anhydrous magnetite, Fe3
Prevention
Galvanization:
The metallic iron is covered by a layer of more active metal such
as zinc. The active metal loses electrons in preference to iron.
Zn Zn2+ + 2e-
Thus, protecting iron from rusting and corrosion.
Inhibitors:
Corrosion inhibitors, such as gas-phase or violate inhibitors, can be
used to prevent corrosion inside sealed systems. They are not
effective when air circulation disperses them, and brings in fresh
oxygen and moisture.
Humidity control:
Rust can be avoided by controlling the moisture in the use of silica
gel packets to control humidity in equipment shipped by sea.
Treatment
Aim:
To study the effect of metal coupling on rusting of iron.
Requirements:
Two petridishes, four test tubes, four iron nails, beaker, sand
paper, wire gauge. Gelatin, copper, zinc, magnesium strips,
potassium ferricyanide solution, phenolphthalein.
Procedure:
Clean the surface of iron nails with the help of sand
paper. Wash them with carbon tetrachloride and dry on
filter paper.
Wind a clean zinc strip around one nail, a clean copper
wire around the second and clean magnesium strip
around the third nail. Put all these third and a fourth nail
in petridishes so that they are not in contact with each
other.
Preparation of agar agar solution. Heat about 3gm of
agar agar in 100ml of water taken in a beaker until
solution becomes clear. Add about 1ml of 0.1M
potassium ferri-cyanide solution, 1ml of phenol-phthalein
solution and stir well the contents.
Fill the petridishes with hot agar agar solution in such a
way that only lower half of the nails are covered with the
liquids.
Keep the covered petridishes undisturbed for one day or
so.
The liquid sets to a gel on cooling. Two types of patches
are observed around the rusted nail, one is blue and the
other is pink. Blue patch is due to the reaction between
ferrous ions and potassium ferricyanide, to form
potassium Ferro-ferricyanide, KFe [Fe(CN)6] whereas
pink patch is due to the formation of hydroxyl ions which
turns colorless phenolphthalein to pink.
Observations:
S.No. Metal pair Colour of Nail rusts
the patch or not
1. Iron-zinc pink No
2. Iron- Pink No
magnesium
3. Iron-copper blue Yes
4. Iron -nail blue Yes
Conclusion:
It is clear from the observations that coupling of iron with
more electropositive metal such as zinc and magnesium
resists corrosion and rusting of iron. Coupling of iron with
less electropositive metal such as copper increases rusting.
Bibliography:
www.google.com
Wikipedia