base station antennas
Ground Plane Antennas
Coaxial Dipole Antennas
‘Side Mounted Dipole Antennas
Dipole Array Antennas
Collinear Antennas
Corer & Panel Reflector Antennas
Yagi Antennas
Phasing Hamesses
WLAN Base Station Antennas
tech support
Technical Support Information
www. rfiantennas.com.au
83-96VHF Adjustable Ground Plane Antennas
alee
Cac
‘The GP Series is a range of omnidirectional unity gain adjustable
ground plane antennas ideal for local area coverage when a high
gain antenna is not required or justified, The broad vertical
beamwidth offers excellent null fill for consistent signal coverage,
GP Series antennas are easily tuned in the field by adjusting the
position of the ground plane elements.
Electrically, the GP Series antenna is a quarter wave radiating
element with the radials acting as a counterpoise, These radials are
of one-piece construction and utilize a unique single bolt clamping
design, The antennas are DC grounded for superior lightning
protection and the reduction of precipitation static noise,
+ Easily field tuned by adjusting the position of the radials
+ Lightweight and easy to mount
+ Broad vertical beamwidth for excellent null fil
+ Compact - Shipped disassembled for ease of handling
Typlal VSWR response (GP) Pt E Pane
Electrical
Tiodel Number oF oS I ore CE
Nominal Gain dB (eBay Ua
Froquony Miz 70-85 Te 196 Ta7=15T THOT.
Tuned Bancwth MA 3 7 @ =
VSWa Ratu Loss) SS SRY
‘Rominal impedance & Ed
Verical Search Te =
Forzontal Beara OennT TFOREE
Input Power W 200
Mechanical
Wodal Number oF GPa I oa I oz
Construction Teany duly aluinum radialiig slerert ortasea ha PVC Tagore
engi meres 7 Ed 35 3
Weight bs 65. 85. 3 cz}
Temnmation TN Formate Wi 20" AG2TS cable Ta
Mounting Area 20" 1.6" dam, aluminum
Suggested CAPS 2xUBI of 2x UCT
Projected [Nove Ta 134 Ta To
area [water 3.80 235 Zi Ta
Lateral @ TOOTH a7 * 20 28
Togas STO ARS w 2 5 z
®
RFI
ANTENNAS.
www.rfiantennas.comVHF Vertical Enclosed Dipole Antenna
The COD30 is a “cut to frequency" fiberglass enclosed vertical
dipole, ideal in single frequency or two antenna system applications.
The antenna provides low wind and tower loading. The COD30
delivers unity gain omnidirectional coverage and excellent null fil,
‘The COD20 Is constructed with an alodined aluminum radiating
element enclosed within a fiberglass radome. The antenna is end
{ed and terminated with a fixed N type female connector. ADC short
is incorporated for lightning protection and reduction of precipitation
static noise.
‘The antenna mounts via a 1.6" diameter alodined aluminum mount
tube. The antenna is supplied pre-tuned to user specified
frequencies for immediate installation
+ Ideal in single frequency or two antenna system applications
+ Unity gain, omnidirectional radiation pattern
Typical VSWR response (COD20) C0030 -£ Pane
Eu
we ron Ce Frarecy
Electrical
Mechanical
Ibs “
RFI
ANTENNASVHF Vertical Enclosed Dipole Antennas
Card
COD1 Series
The COD1 series antennas are “cut to frequency" fiberglass
enclosed vertical dipoles, featuring extremely broad vertical
beamwidths and omnidirectional patterns for localized coverage.
+ Low wind and tower loading - ideal in conditions where high
winds are a factor,
+ Ruggedized version (COD12) in an extra heavy duty black fiberglass
radome to maximize solar heat retention - aiding in ice shedding
+ Models available with 5% tuned bandwidth for duplex applications.
+ DC grounded for lightning protection and the reduction of
precipitation static noise
VSWR respanse (COD14) @40ltHe cont E Pane
Electrical
Tage NE O07 I oor I co
on Ga TBAT Sun
Tee te ae
Taree Bo a I aE
Tat To) IST Tey
ora pecan =
Torte! Bora a I 7
orca BoenT OOS
Tou Power = I 2
Mechanical
aa ER TOOT TOUTE coor
cconineton csned sa omens wan wnve]__Mbdred alum. Sena® Ioan atu, elt wih whe
tories race ih rede Thorac adore
cas 7 1 78
Waar 2 73 3
Serenata Taras boa
Trae oer aa TTS aT
Mounting Area alodined aluminum: alodined aluminum. stainless steel
Sa Ta Sus! Tae
Faeaes [irs a7 7 Ta
feat frre oar 2 Ze
teats Tana ‘° e s
WT STRATA =e
Tage TOG as z ae I TE
®
RFI
ANTENNAS.
www.rfiantennas.comVHF Vertical Enclosed Dipole Antennas
‘The COD2 series antennas are “cut to frequency” fiberglass
enclosed vertical dipoles, featuring extremely broad vertical
beamwidths and omnidirectional patterns for localized coverage.
+ Low wind and tower loading
+ Ruggedized version (COD22) in an extra heavy duty black fiberglass
radome to maximize solar heat retention - aiding in ice shedding
+ Stainless steel! mounting version available (COD24) for corrosive
marine environments
+ DC grounded for lightning protection and the reduction of
precipitation static noise
cone - Plane
‘ical VSWR response (COD2)
:
Peg
eeu
Electrical
ee Fey
ee E
Ta et SET eT
aaron te
Mechanical
Tres aun srs
conanuon odredauninumslecens | “PREIS SENET | Nodred aurnumslonens
evn terpenes acon rare wrt totes doe
car 7 1 7
Mounting Area _alodined aluminum alodined aluminum: alodined aluminum
= a ir ta
or 1 3 1
outa =a
San gona Eas 7 = 7
wwwitfiantennas.com &
ANTENNASUHF Vertical Enclosed Dipole Antennas
‘The CODS series antennas are a range of fiberglass enclosed
vertical dipoles ideal in local coverage applications. COD4 series
antennas deliver extremely broad beamwidths which enhance close-
in coverage. They are supplied pre-tuned in set bands and can be
held as a stock antenna if required.
+ Ideal for local area coverage
+ Available spot tuned to user specified frequencies or in a number
of pre-determined band configurations
* Unity gain omnidirectional radiation pattern with excellent
null-fil characteristics
*+ Dual decoupling choke to ensure distortion-free pattern
Typical VSWR response (COD4)
Electrical
Tce NaMBSr CODESS | —CObe 75 | —CODET | copes | Cone | CODE
‘Noinal Gan oB7 (SB) ZU
Frequency Mz Ba aa
Tuned Banda Fal %
VSWA (HotU LOSE] SE
Nominal Impedance 30
‘ertcat Beart 78
Foraonta Beard nT OSE
Tnput Power W 30
Passive IM 3rd oer BE Br
Mechanical
‘ode Bar cones [cones | cone | cones | cone | coe
Tonstcion ‘lodined alarinum slemeats win white Targass Tedore
angth inches aT % [arabe
Weight bs 7
Termination Tara Buea
Mounting Aaa SHY dan. abainod aan
‘Sugssied Camps ZHUCT or PxUBI
Projected [No eo ar ‘O27 oa
neat [Waren TSE 130 OSE
Lateral st @ oom 7
los
WRT OT RTT SB
Targus I00 man HS z é cs
« @ www.rfiantennas.com
RFI
ANTENNAS.UHF Vertical Enclosed Dipole Antennas
Err
‘The COD8 Series antennas are a range of fiberglass enclosed nt
vertical dipoles, ideal in point to multipoint, trunking, cellular and
local coverage area applications, The antenna has a relatively broad
bandwidth and easily accommodates both transmit and receive
portions of any of the common 800MHz operating bands.
+ Available spot tuned to user specified frequencies or in a number
of pre-determined band configurations.
+ Excellent null fil coverage
+ Omnidirectional unity gain performance
ea esos (0008 coos Ema
a
Electrical
ea an EE aa
Fanon ie 7 —, a
ip Bora a 7
Tene Roun Ee
Mechanical
Cone ror 3 t a
Mounting Area alodined aluminum alodined aluminum alodined aluminum
ra as f = os
a 7 3
ee =
oar oT mes z 1 i z
www.rfiantennas.com & 7
ANTENNASVHF Side Mounted Dipole Antennas
eros
SDC
‘The SMD1 Series side mounted dipoles are broad band antennas
which, through different phasing and mounting arrangements, can
offer a variety of pattems (generally cardioid) tailored to specific
‘coverage requirements. These antennas can be mounted in dual
or four-stack arrays for 6B gain over a single
The SMD1 is constructed of heavy gauge corrosion resistant
anodised aluminum tubing with @ high pressure cast aluminum hub
assembly and stainless steel ftings, This combination provides an
‘exceptionally strong antenna, suited for extreme weather conditions.
The SMD12, is a ruggedized antenna featuring extremely heavy
walled tubing, all welded alodined aluminum construction and a
black epoxy coating to aid in solar heat retention. The SMD14 is a
stainless steel version and is ideal in corrosive marine environments.
All of the antennas are electrically identical
SMD antenna construction allows for the entire antenna to rest at
ground potential making it highly recommended in lightning prone
applications.
Can be phased to provide 3dBd or 6dBd gain in a variety of
patterns to suit specific requirements. See page 78 for our full
range of phasing hamesses,
Full bandwidth coverage for both single antennas and phased
arrays - ideal in community sites
Ruggedized and stainless steel versions available
Normally available ex-stock for immediate delivery
‘SMD sores antennas are supplied wi a boom for 4 wave antenna to mast
spacing. Booms for Ys wave spacing and fll wave spacing are aso avaiable.
4Aoplcaton details on phasing ard rourting of SMO antennas as iciued the
technical notes atthe back of is cataog,
®
RFI
ANTENNAS.
www.rfiantennas.comVHF Side Mounted Dipole Antennas
Creed
SDS
Typical VSWP response Typical VSWR response
(9M01,12.14) at wave spacing (9MOI,12,14) a % wave spac
Bl By
a gare Bos
APtae at % Pane at ve antonna
Pook gain at 0" of a8
Electrical
Nee a oe) aly ony var a our argo
eqn We Tose oa
To Beever en bad ae
OUT COT SE TEOT
era pear im
ania oS I aT aR
oral Bear Teal 25 a aera Sp
Tutor 0
Mechanical
= Tria wate aun fear ay surara wi Saas ste eat | Twat aur
‘ica surnam [Has soa tah | anu [wie ra ab
Sara
a ee es
Teron Neral WR HGES a a
Mounrg ea 1485 18" dam, aluminum [eats dam salons 75°15 da
Sage ORS TUR arUORE
fren fem as a0 as 3a
100mph ibs ae av @ 80
Jeg oT ABS 1 a a 7
www.rfiantennas.com e& >
RFI
ANTENNASVHF Side Mounted Dipole Antennas
ene
‘The SMD2 Series side mounted dipoles are broad band antennas
bolaal IL which, through different phasing and mounting arrangements can
offer a variely of pattems (generally cardioid) tailored to specific
‘overage requirements. These antennas can be mounted in dual
‘of four-stack arrays for 6dB gain over a single
The SMD2 is constructed of heavy gauge corrosion resistant
anodised aluminum tubing with @ high pressure cast aluminum hub
assembly and stainless steel fitings. This combination provides an
‘exceptionally strong antenna, suited for extreme weather conditions.
The SMD22 is a ruggedized antenna featuring exlremely heavy
walled tubing, all welded aluminum construction and a black epoxy
Aye coating to aid in solar heat retention. The SMD24 is a stainless
‘steel version and is ideal in corrosive marine environments. All of the
antennas are electrically identical
SMD antenna construction allows for the entire antenna to rest at
ground potential, making it highly recommended in lightning prone
applications.
+ Can be phased to provide 3 dBd or 6 Bd gain, in a variety of
patterns tallored to suit specific requirements. See page 78 for
our full range of phasing hamesses.
Full bandwidth coverage for both single antennas and phased
arrays - ideal in community sites
* High strength - SMD2 features anodised aluminum construction
and high pressure cast aluminum centerpiece
Rugged and stainless steel versions also available
+ Normally available ex-stock for immediate delivery
‘Al antennas are supplied wit a boom for Ya wave antenna to mast spacing
Booms for Ys wave spacing and ful vave spacing ae also availabe. Apoication
etais on phasing and mounting of SMD antennas ae iced nthe technical
hates af the back ofthis catalog.
RFI
ANTENNAS.VHF Side Mounted Dipole Antennas
Pees
SDE
pica VSWR response
(9002.22.24 a Ye nave seacing
1H Pane at wave antenna
Tomast spacing
Peak gain at 0" of tS
Tjical VSWR response
(902.22.24) at wave spacing
a
Plane a Ye wave antenna
oak gain at 90. 270° of 2481
Electrical
Wocel Number SMOZ SDR SwDET ES
Nominal Gain dB (eBay Homily 2 (Uniy) Bu varios wi Mourting arangemronts
Frequency Mi Te8- 175 FEE}
Tuned Banawiath Enire band Tom
VSWA Foun Lossy STS TB
‘Rominal impedance 3
Verical Seamwath TypiGaTY 7 a antenna ast SBaET
Forzontal Bearnwath Typically 230" al 27 antorta - asl spacng
Trput Power W 250
Mechanical
Model Number ‘SMOZ Sub SBI SHOTS
Consinction “Tri walled alrinm |Aeawy Guy lumina wif] Slainess steel wit cast | Tek walled alrinum
with cast aluminum hub | black epory trish ‘aluminum hub | with east aluminum hu
Tongimneros ca 3
‘Weight bs EX} I ae 35 ae
Terinaton 1 Tamale wih ROPTS cabie tal
‘Mounting Area, 11.8" « 1.6" Glam. aluminum eee seal nu
Suggested CABS TRUCRT or UCR
Toes aT To aT Ta
aha TT 17 17s Bre
Taleral THE @ TOOTH
= Ey 25 22 37
ToquS STOO AA TES W zz % a
www.rfiantennas.com
$
RFI
ANTENNASUHF Side Mounted Dipole Antennas
‘The SMD4 series are a range of unily gain side mounted dipoles
belaal Ld which can be used as a single antenna for short range applications
or, if desired, phased together to provide high gain array coverage
characteristics,
‘The SMD4-67 is of all welded aluminum construction. The feed point is
protected by an ABS cap, with the intemal PTFE based cable
‘construction providing excellant intermodulation performance (-150d8).
‘The stainless steel SMD41-67 is electrically identical to its aluminum
counterpart and is recommended for corrosive environments,
All of the SMD4 series antennas are directly DC grounded for
‘superior lightning protection and the reduction of precipitation static
noise,
‘The SMD4 Series antennas are supplied with a boom for % wave
antenna to mast spacing. Application details on phasing and
‘mounting of SMD antennas are included in the technical notes at the
back of this catalog,
+ Versatile - Antennas can be phased and manipulated to achieve a
variety of horizontal radiation patterns and varying gains. See page
78 for our full range of phasing harnesses
+ Stock Antennas - Generally available off the shelf
+ Lightweight - Easily mounted and installed with single clamps
+ Allwelded, full folded dipole construction
+ Varying boom lengths available to suit coverage requirements
‘The SMD¢-88 isa spec frequency version ofthe SMD#. This antenna is designed
ony for use asa single pote, nor asa component ofa phased cpole array a Ihe
antenna is custom madi to user specifed frequencies and isnot specifealy
rratched a a phasing hamess It can be ordered wih a soceled conte Fequency
Anywhere inthe bar ram 960 to 600 MH? win an operaing bandwith of
approximately 20% of center hequency.
x ® wawsfiantennas.com
RFI
ANTENNAS.UHF Side Mounted Dipole Antennas
Een
SEs
Typical VSWR response (SMD4.67), SMD 467-11 Plane
f| SHORE aT
3 mate
ra BP E
Electrical
Tera Sa eB Ba Tl Un Boa SU RS
Pay i ae S80
Vertical Beamwiath “Typically 70° at 7 antenna - mast spacing
Pea Waar =
Mechanical
7 Agate dana Aang cna
a = oz
a 3 °
eee =
wwwitfiantennas.com ge «UHF Side Mounted Dipole Antenna
Eee
‘The SMD8-90 side mount dipole is an extremely broad bandwidth
antenna recommended for local area coverage or short haul RF
link applications,
‘The antenna is internally DC grounded for lightning protection and
the reduction of precipitation static noise.
+ Provides either directional or largely omnidirectional
radiation patter
+ All welded and alodined aluminum construction
Please note, we recammend against phasing the SMDB-90 antenna as the
required accuracy is fr foo cnc to be adequately cortaled inthe field. Thus,
we do ot publish any information fo assist inthe phasing of our 800 MH si
‘mount cipole antennas.
‘ica! VSWR response (SMD8-99) — SMDB-S0H Plane at wee
a ‘antenna fo mast spacing
ei
By
Peak gain at 0" of 2084
Electrical
Model Number SMDEST
‘Nominal Gan dB (Boy Tomi 2 (Unity) bul varies win Touring arangemonts
Frequency Miz 305-960.
“Tred Banawidly Ene band
VSWR uum Losey 151 (108)
3
Nominal impedance
Vertical Beamwdt
Forzontal Bearwah
Typical BS at Ta antenna = aT SDRC
Typical 7S" at anton = mast spacing
Trput Power W 200
Mechanical
Model Number SEED
Construction “A waad alinum wih soared THT
Tongth inches 7%
Weight bs Oa
Termination female wih shor STA cable ar
Mounting ASE 3a" 1 dam. abdned suminar
“Suggested Clampe TONY.
Projected [Novee 0.70
aveatee —_[Watrer Oza
Lateral Thrust @ TOO7ApH 2
bs.
ST
Wire FAITE ET
Torque @T00 mp MDS
» >
RFI
ANTENNAS.
www.rfiantennas.comfor our latest news, technical tips and
up to date product information visit...
www:rfiantennas.com
technical supportVHF Omnidirectional Dipole Arrays
These high performance VHF dipole omnidirectional arrays are for
use in highly populated radio sites requiring long haul
‘omnidirectional coverage, The arrays feature high gain, low noise
performance and enhanced nul fil coverage with omnidirectional
‘coverage characteristics.
uy
es
Each of the dipoles are fed vie an internal phasing hamess in stable,
PTFE based double-screened coaxial cable with PE jacket for
‘optimum weatherproofing, These omnidirectional arrays incorporate
‘extensive side lobe suppression and nul fil, and the binary phasing
arrangement ensures consistent omnidirectional coverage and
vertical pattem control
‘These arrays provide unparalleled bandwidth, covering the entire
136-174 MHz band and offer gain of 3 or 6dBd over that band with
a VSWR of less than 1.5:1. With input power levels of 750 watts, the
antennas are suitable for high power paging sites or high density,
‘multi-channel installations requiring maximum performance and
service life.
With all welded construction and superior internal harness
construction, these antennas provide not only excellent pattern
characteristics but also defined, high levels of intermodulation and
noise suppression. The entire array rests at ground potential and
pyvenyy offers the ultimate in lightning resistant antennas.
+ High gain omnidirectional patterns
+ Operate over entire 136-174 MHz VHF band without tuning
or adjustment
+ Modular mix and match format allows future-proofing installations
+ 3° downtiit option available on BA80 (four pair) version
+ Inverted mounting version available
+ Industry leading PIM ratings (-150dB.) providing low IM and
low noise characteristics for optimum performance
‘Optons avaiable include
‘Ai stainiess ste 316 grade consniction (3480 aray ony)
‘leveled mounting cantiguation
+ BA80-41 may be operated as 2 x 9084 arrays by removing extemal
cable hamess
RFI
ANTENNAS.VHF Omnidirectional Dipole Arrays
Peach
CC us
Ce pues
gl
Tipical VSWR response (8440-41)
BAM0.41 -E Plane
‘Woica! VSWA response (8480-41)
cro Foca
BABOL#T -E Pane
Electrical
Mode uriber BARAT BARAT
Nominal Gain dB (a@ay SO oo
Fraquancy Mz
Tuned Banderath
A TRotarn Lassy
Nominal Impedance
Downie Nat otere TSe_F_ sere
Vorical Seaman i 8
Horizontal Beamwaih Omni +O SSB
Trput Power W 750
Passe TH ord ror BE HIB I =a
Mechanical
Moder Number Baa T BREDA
Construction ‘Al walded alarm wih abedned Wish, See note (2)
Tengih inches 3 2
Woghtbs Bao mo
Termination Ni Feral wih 20" O14? ae al See nove
Mounting Aa ORES" Gia alu T 20x30" dar aT
suggested Camps ZeUCT
Projected [Novo a8 ams
‘Arca [wares 756 434
Tateral Ta @
‘oomph bs 1 eet
Wine Gust Rating mB Ta TW
Torque GT00 mph Teibs =e Tet
3 may be spied on 8489 series antanas using mods valor -12
‘a subplea na waded 276 grade siamese steal. meron ay eighty
78 DN femae cared aig mass oe DIN
www.rfiantennas.com
RFI
ANTENNASVHF Elliptical Dipole Arrays
‘These high performance VHF binary phased eliptical arrays are
ideal for the bi-directional coverage requirement of paging and VHF
hhigh band mobile “corridor” applications. The main lobe of these
arrays is strong and highly controlled with extensive side lobe
‘suppression ensuring the integrity of the pattern,
The folded dipoles utilize an intemal phasing hamess in stable,
PTFE based double-screened coaxial cable with PE Jacket for
‘optimal weatherproofing. These elliptical arrays incorporate
extensive side lobe suppression, null fil, and accommodate power
input levels of 750 watts continuous,
With all welded construction and superior internal harness
construction these antennas provide not only excellent radiation
characteristics but also high levels of intermodulation and noise
‘suppression, The entire array rests al ground potential and offers the
ultimate in lightning resistant antennas,
+ High gain elliptical pattern with SdBd or 8dBd versions available
+ Operate over entire 136-174 MHz band without tuning
or adjustment
|
Ewa)
+ Inverted mounting version available
+ Industry leading PIM ratings (-150dBc) providing low IM and
low noise characteristics for optimum performance
(Options avaiable include
“Al staniess ste! 316 grade constncton (SdB aay ony)
“Ioveted mounting configuration
£40.41 may be aoerated as 2 x Sad airays by removing external
cable harness
RFI
ANTENNAS.VHF Elliptical Dipole Arrays
Peeedd
aCe
0-41 -E Plane EAd0-41 -H Plane
Typical VSWR response (EAd0-41)
Pine
(SW response (EAB0-41)
Electrical
Wael Number ERAT EAGT
Nominal Gain dB (8a) Te 108
Froquoney Wri 136-174
Tuned Bancwiath Enire band
VSWR Ratu Losey S151 (ecb)
‘Romnal impedance
Downie Rat otared DSi See rote)
Verical Searrath = 1
Forzontal Beamwiath Toe cy
Trput Pawar W 70
Pasve IM Grd ora BE 75 I =a
Mechanical
Mosel Number ERAD-AT ERSUAT
Consiruction ‘All wale alarm wih alained Wish, Sea nove @)
Tengih TH 28
Weight bs 320 a
Termination Ni Farale with 20" O14? Gable Tal See note GL
Mounting Area DOES Gar aun I 2x30" Ga, TA
Suggested Champs ZEUCT
Projected [Novae 35 ozs
arcate [waren 37 77
Tateral Taras @
‘oomph ibs ver 250
Whe Gast Fatng ABR co To
Torque @T00 mph FBS Ea 0
(1 Fac preset down af 3 maybe 3p
2 EAAD sues eat be pirat supple a ws
ed an EAGD sees antes way mod! 0. ae 2
ry sn
(3) Connecter tamination option avatabi of 7/162 mais cantar using made. alt ON
www.rfiantennas.com
RFI
ANTENNASVHF Offset Dipole Arrays
Peres
Yet] ‘These high performance VHF dipole offset arrays are ideal for use
when a cardioid pattem is required. The arrays feature high gain, low
Cr i
noise performance and enhanced null fil coverage with typical
‘ardioid coverage characteristics.
OA series arrays have an almost full 180° horizontal beamwiath,
This eliminates the possibility of fading at the extremities of the
target coverage area. Antenna gain is approximately unity at the
rear of the antenna,
As would be expected from a cardioid array, the vertical beamwidth
is slightly greater than its BA (omnidirectional) or EA (elliptical)
pattern counterparts,
OA series arrays feature the same solid construction as the BA and
EA Series. The folded dipoles utilize an internal phasing hamess in
stable, PTFE based double-screened coaxial cable with PE jacket
for optimum weatherproofing. The offset arrays incorporate
extensive side lobe suppression, null fil, and power input level of
750 watts continuous.
With all welded construction and superior internal hamess
construction these antennas provide not only excellent pattern
characteristics but also high levels of intermodulation and noise
suppression, The entire array rests at ground potential and offers
the ultimate in lightning resistant antennas,
ee)
+ High gain offset (cardioid) pattem. SdBid or GdB8d versions available
+ Operate over entire 136-174 MHz VHF band without tuning or
adjustment
+ Modular mix and match format allows future-proofing installations
3° downtilt option available
+ Inverted mounting version available
+ Industry leading PIM ratings (-150dBc) providing low IM and
low noise characteristics for optimum performance
(Optiens avaiable include
“Al stainless steal 316 grad construction (SdBd aay only)
“ime euning oration
{Ona ray operated 25080 aa ono oor
ce hanes
on & wawsfiantennas.com
RFI
ANTENNAS.VHF Offset Dipole Arrays
136 - 174 MHz
Cyr
WF response (0420-41) 020-41 Plane
ne
SWR response (OA0-41)
0n40-41 -£ Plane
Electrical
Model nuribar CROAT CROAT
Nominal Gain dB (a2) To 7
Froquoncy Miz SELESICI
“Tuned Banciath MAE Enire band
VSWR Return Loss) S151 (14a)
‘Nominal impedance 30
Downtit Nat area OSG, Soares
Verical Searwah = 1
Forzontal Bearnwnath TF Te
Thput Power W im
Passe IM ard oor BE 50 I a
Mechanical
Wael Number ORDA ORO
Consiucton ‘Alwalied aurinum wih albaiied (sh. See role 2) for sarfess stool options
Length inches 138 26
Weight bs 25 cog
Ternvnalor TN Farrale Wi 20" O12 CabWe Ta See ree]
Wouning Ae OX Ga aA I 20x30" Gan au
Suggested CHAPS PxUT
Projected [Novos a8 73
aaveate [wats 3.88 12.36
Tatoral Trask @
‘100mph fs 89 197
Wine Gust Rating mp Tae Te
Torque @T00 mph febs 206 Tis
1) Fat rst owe
grade slaves stow. Dire
2" maybe speiad on 440 srs ants using ode nate
my upped na wa
a
www.rfiantennas.com
oe:
RFI
ANTENNASUHF Omnidirectional Dipole Arrays
Eee ‘These high performance UHF dipole arrays are ideal for highly
Ciera populated radio sites requiring long haul omnidirectional coverage.
Yer ene ‘They operate over entire bands and offer gains of 3, 6 or 9dBd
(depending on model) exhibiting a VSWR of <1.5:1 across the band,
‘The arrays utilize an internal phasing hamess in PTFE based
double screened coaxial cable with polyethylene jacket to aid
waterproofing and resist bird attack. The use of a unique phasing
arrangement provides extensive side lobe suppression and nul fill
characteristics. The arrays will accept an input power level of 500
watts continuous, making them ideal for high power multiple
transmitter applications, The BA80 series are offered with 3°, 5° or
‘8° downtit, to further enhance close-in coverage characteristics.
All welded alodined aluminum construction and new fabrication
techniques in both the hamess and dipole sections have proven to
minimize intermodulation and noise generated within the antennas.
The entire array rests at ground potential and offers the ultimate in
lightning resistant antennas.
+ Ideal for highly populated sites requiring long haul
omnidirectional coverage
+ Operate over entire 330-420 or 400-520 MHz bands
+ 3, 6 or 9 dBd gain versions available
+ Inverted mounting version available
Versions with 0°, 3°, 5° or 8° of downtilt available
Extensive side lobe suppression and null fill
+ Industry leading PIM ratings (-150dB.) providing low IM and
low noise characteristics for optimum performance
2 wawsfiantennas.com
RFI
ANTENNAS.UHF Omnidirectional Dipole Arrays
TWpieal VSW response (BAAD-67) "jpical VSWR response (BABO-67) _pical SWR response (BAT60-67-73)
vier 2 anny
esol EEE
840.87 -E Plane BASO67 -E Pane
Electrical
Tost Haber eRe aa exo aos amr
Ho] Sor a BET = 55 77)
Tapa Me a mom] 355-55
arena ener
TOW PT To) zee ea)
omar pecan =
Som aaa FSET SST ¥
Teal Beara a ie a
FanonaT Soa =O
Tet Power a 300
sre ea oe ar 0 [0
Mechanical
Toe Naber ERO a a a
Soa AAUP TOES, S00 ATE) STOTT TE
na re ae tie 707
Wegitbe ts 8 om
Tao TPIS AT HTT STEAD
Mounting Aon 201. da, alma Eas aan
SRT TR TET
Baad [os 208 137 tar 335 oa
een freee a8 3a eat ar oat
oo aa = = = =
oe OR TTT co 7 ia 73
Tear sto ee | — ea a i io.
1) Fat pret downto 2 ® maybe spooked on AO snc
(2) Ruggodeed ack comer coat th
(5) bat and B4z0 cones may bs aps
(5 Connon
formas using mode ne. air
en on sma or ene conse) saa ;
ied ina welded 316 Mena Craze Stniss stent Dmanstore vy igh
6 DN female camestr us mel. DIN
wwwarl
fiantennas.com e& x
RFI
ANTENNASUHF Elliptical Dipole Arrays
. The EA series arrays provide exceptionally high gain with an
Erbe UES elliptical shaped radiation pattern, ideal for the bidirectional
coverage requirements of some "corridor" applications.
‘The array utilizes an internal phasing harness in PTFE based double
screened coaxial cable with polyethylene jacket to ald waterproofing
and resist bird attack.
‘The main lobe of these antennas is strong and highly controlled with
extensive side lobe suppression ensuring the integrity of the pattern.
To further boost performance, users of the EA80 array may specify
beamtit of 0, -3 or -5 degrees. Superior performance is maintained
‘over the entire operating bandwidth of the antenna (330-420MHz or
400-520MHz). VSWR is maintained at <1.5:1 and input power levels
of 500 watts are catered to for true high density site requirements.
With all welded construction and superior internal harness
construction (using highly stable PTFE based cables) the antennas
provide not only excellent radiation characteristics but also high
levels of intermodulation and noise suppression. IM performance is
‘a world leading ~150dBC based on a two cartier test. The entire
array rests at ground potential and offers the ultimate in lightning
resistant antennas.
+ Ideal for highly populated sites requiring "corridor" style largely
bidirectional coverage
‘SdBd or 848d gain versions available
+ Inverted mounting version available
. 3° or 5° of downtilt available
+ Extensive side lobe suppression and null fill
+ Hermetically sealed internal phasing harness
+ Industry leading PIM ratings (-150dBc) providing low IM and
low noise characteristics for optimum performance
a = & wawsfiantennas.com
RFI
ANTENNAS.UHF Elliptical Dipole Arrays
Bees
Cu
EA80 Series
Typical VSWR response (EA40.87) Ea40.87 -H Plane
neon won,
Typical VSWR response (EA8O-87)
Electrical
Mode NumBsr ERBOST EROS EASOST
‘Nominal Gan oBT (a6) 706) 7) 0B
Frequency Mz 0-425 aS
Tuned Banga HAE Ene band
VSWA (Return Loss) S15 11 (1406)
Nominal irpedance Or 30.
Down Naratared Nor ofared TET aT
Vortcal Searnwiah 7 3 i
Horzoral Beard 7 7 7
input Power W 500
Passive M 31d FG BG] 250
Mechanical
Mogel Number ERBOST I FROST I ERGOST
Construction Tilwatea aorinam wih afodined Wri See nate
Tongh ihes a cd Te
Weight bs 175 70 7s
Temmation TN Farrale wih 20" 12 cai tal See note BT
Mounting Awe 201" dam. alumnus
Suggesiod Camps Bxucr
Projected [No ee az 226 3a
neat [tre TSE 3.80 7.3
Tateral Tras: @
{00m os 02 56 7
Wine Gust Pang mT Ta Ta 735,
“arque @100 mph F-bs| 355, Es 316.
(1) Facto pnt down of 5 ay ba spins on E8087 ens aranras ung modem, ta -T96-T5
(2) toad EABO sores ray be ootoral suid a welded 976 Maine Grade Stree soot Orranntrs ary sgtiy
{5} Canoe ominaton opton vate of 1/98 DN eae connect ing mode r,t BN
www rfiantennas.com e& x
RFI
ANTENNASUHF Offset Dipole Arrays
ena
, Offset arrays are directional antennas for use when a base station is
eu atone end of the coverage area, These new arrays feature improved
‘gains, low noise performance and enhanced null fil coverage in an
array with typical cardoid coverage characteristics.
(OA Series arrays feature the same solid construction as the BA and
EA series. The array utilizes an internal phasing harness in PTFE
based double screened coaxial cable with polyethylene jacket to aid
waterproofing and resist bird attack,
‘The OA Series have slightly more than 170° horizontal beamwidth,
thus everything in front of the antenna is given coverage. This
eliminates the possibilty of fading at the extremities of the target
coverage area. The level of radiation at the rear of the antenna is
approximately unity gain.
‘As would be expected from a cardioid array, the vertical beamwidth
is slightly greater than its BA omnidirectional or EA elliptical pattern
counterparts.
‘These antennas are also offered with -3°, -5° or -8° of beamtilt, and
allinclude extensive side lobe suppression, null fil and a power input
level of 500 Watts continuous.
+ Operate over entire 330-420MHz or 400-520MHz bands
+ Inverted mounting version available
‘SdBd or 948d gain versions available
+ Hermetically sealed internal phasing hamess
Industry leading PIM ratings (-150dBc) providing low IM and
low noise characteristics for optimum performance
RFI
ANTENNAS.UHF Offset Dipole Arrays
Bees
TCT
ee
‘yoca! VSWR response (OA20.07) 0920.67 -£ Pane 0820-67 - 11 Pane
Jyplea! VSWR response (0140.87)
Electrical
adel Numibor ORO, I ORO, ORO, I CRORT,
Nominal Gan dB (2) TE To
Frequency Wiz B= 00 a Baa
Tuned Bandwigth MAE Ente aand
VSWR atu Loss] 15-1 14a8y
Rominal impedance 52
Down Nor orered OST aH SeO NTE
Vertical Bearer a ia
Horizontal Beara Te I Ta Tr I Tr
Inout Powor (Wats) 500
aseve IM SrcOrder Be =80
Mechanical
Wocel Number ORIST I ORIST I ORIG I ONDE
Tonsiructon ‘Alwokiod alamin wa loaned Tah. Soe notes (2) and (Tor alomalvo Wishes.
Tength neha we 118,
Weight bs 3a Tas
Terninaton female with 20° 9142 cabio Ta. Soo noe
Mounting Se 207 13" lam aluminum
Suggested CAmpe Zar
Projected [Nove Taz 7 00 2a
avcate’ [wires 290 276 328 395.
Tateral Taras: @ TOOT
a 4s a” 74 72
Wind Coa Tang MBA S15
“Torqus @T00 mph ibs 5 I I a I 2
(1) Fact pre-set awe maybe speed on ON4O sas teas sing model no. 7,75 oT
(2) Raggedved buck pcr casted fh fas nice hoa fr eare constora) eralae ona aura sys
(8) ONG and Ondo senca ay be opdnaly supped in a0 madad 916 Mane Gade Staries see, Cantor vay SHY
(6) Comedy omnaten tan abo 7/78 Di omals connote utig moa. tai =i
wwwitfiantennas.com & 2
RFI
ANTENNASArray Combination
Reed
Cian
eco oaes
The RF range of UHF dipole arrays provide expanded bandwidth, high
power ratings and unequalled performance in gain, pattern and
intermodulation performance.
Ever increasing costs and site density requirements are reducing availabilty
‘of antenna positions on prime site. In order to reduce the overall number of
antennas the RFI digole array series provides system engineers and site
‘owners with a flexible solution to reduce antenna numbers,
The RFI combination arrays are available in three types:
The Single Section Multiple Array
‘A combination of two arrays mounted upon a single piece of 1.9" diameter,
118" longth mast section. These arrays are common where any combination
‘of medium gain UHF omnidirectional, offset or eliptical arrays are required
‘The feeding of each ofthe arrays is via separate coaxial cable tails at the
base of the array.
‘Some common configuration examples are showin in the following tables. The
‘electrical specifications are very similar to those provided for the individual
arrays listed within the catalog, Shown on the let isthe BA4040-67.
The Dual Section Combination Dipole Array
‘These arrays are provided in two sections for ease of shipping and handling
‘and can be assembled on site
‘The lower section array is made on a larger diameter mast stock, the
‘upper array telescoping into the lower section. Both upper and lower
‘arrays can be any one of our standard UHF arrays or be externally
‘coupled for even higher gain using @ PH42-67 phasing harness. This type
‘of configuration provides unrestricted gain, pattern and beamtilt
‘combinations.
‘Some more common configuration examples are shown in the following
tablo. The electrical spociications are very similar to those provided for the
individual arrays previously listed within he catalog. Shown on the lets the
‘BA0-67L lower section with OA40.67 upper section.
The Combination Collinear and Dipole Array
‘Similar in many regards to the above arrays this type of combination array
‘employs a collinear antenna as the upper section of the array. These arrays.
are ideal where tower wind loading is a critical consideration. The collinear
antenna fis into a lower section array, which can be essantialy any style of
‘our higher gain UHF dipole arrays.
‘The collinear antenna (COL8 or COL17) is held in an adapter which can
be fitted to any appropriately configured UHF dipole array.
‘A sample of the more common configurations are provided in the folowing
table. The electrical speciications are very similar to those provided for the
Individual arrays previously isted within the catalog. Shown on the lets the
‘BX@0-67 lower section with COLE upper section.
www.rfiantennas.com
RFI
ANTENNAS.Array Combinations
Ordering Details
A eee au
Par narber Deseraton Fraqueney
Omar
BAROSOST) 2x Sa ons wat Soper TOTS SHOW,
BAROOST, ‘2x SdH omnis wit soparato foods 400-520
Tiptical
ERADAOST, 2x SAE wlipTeals wih separate Tas SHOE
ERADa087 2x 506d elipicals with separate feeds 400 520M
Offset Sections
‘DALE Ex BABE OTC wa Sopa TSSE -TOO-SOAE
een
‘Shown below are lower sections only which include a through harness to connect your choice of upper saction. Select your
Upper section from the arrays section shown on pages 22 to 27,
Par RURADOT Descriptor FreqUeTey
Omnis
BARDOT Zi aE ors wih separa EGS SHAE
TABO-S7L, Tx de om ‘S-AOAE
BAaDIeATC Dx SABA omnis wit separate TSGe 400-520
BABO-E7L, Tx6d80 om -TOI-SEONE
Miptical Seaton
ERDSO STL 2 EGE Sips wit separate OTS SAPO
ERBOSTL Tx abi sliptcal ‘S50-a20NHZ
ERDAS ZX EGBA oliptcals with soparas OOS -00-520AE
FROG-ATL Tx abd elipical 00-520MH
Offset Sections
DADO 2x SAE oTeas wa saparate Teds FSO,
TRADE T xB ofs0t 400-520NHZ
\When ordering a dual section combination array you will noed to ordor as follows:
1. Specify your lower Section from the list above eg: BABO-S7L PLUS
2. Specify your single upper section from pages 22 to 27. eg: OAA0-67.
eee
these lower sections are for use with COL series collnears. hey are provided with a through harness to connect your
choice of COLB (UHF), COL15 (VHF) or COL17 (VHF) colinears.
Onmnie
BXaTST TXSSBT OR -FOSEONE,
BxAOST ZTE omnis wih separate ede 00-520
BxE0-7 Tx6d80 om 400-520
Tiplical Seaton
EXOT Tx Sa8a liotcal oO SOWIE
EXAOOST) 2x SEB olipicals wih separate eds 00-S20NHE
xe0-7 “x e080 etpical 400-S20MZ
‘Offset Sections
‘OxavaU-T Tx BEC CTS WT aT TRE TOOSOAE
OxAD-a7 Tx dB ofS! 00-520
When ordering a combination collinear and dipole array you will need to order as follows:
1. Specify your lower Section from thelist above og: BX80-67 PLUS
2, Specify your COL collinear either COL15, COL17 or COL8 eg: COLB (and remember to specify frequency)
www rfiantennas.com & »
RFI
ANTENNASry
CLR
coLi
Ce aa
VHF Vertical Collinear Antennas
‘The 66-88 MHz COL range is a series of “out to frequency" 3dBd
gain vertical collinears. The range includes models suitable for
simplex, duplex and heavy duty applications. They all include
internal DC grounding for lightning protection and the reduction of
static noise. Drainage vents at the base allow the antennas to
‘breathe’ and thus prevent condensation build up.
coLté
Tne COL16 is specifically designed to cater for transmit to receive
separations of up to 2 MHz. The antenna is a series fed colinear
which is housed in a heavy duty tapered fiberglass radome, fitted
with @ alodined aluminum mounting tube. The COL16 (and the
electrically identical COL1) nave been specifically designed to
‘maintain stable vertical radiation pattern characteristics at the
extremities of the tuned bandwidth. This ensures reciprocity of
transmit and receive signal characterstics.
cout
‘The COLL is an electrically identical internal design to the COL16
with ruggedized construction, designed for use in the most extreme
climatic conditions, The radome which houses the active elements
of the COL1 was originally designed to serve as the mast of
recreational sail boards and is immensely strong. The radome is
colored black to maximize solar heat retention and this has been
shown to aid significantly in ice shedding. The antenna is fitted with
a large, 2.4” diameter alodined aluminum mounting tube.
COL34-T1
‘The COL34 is a two piece antenna designed for applications where
the overall length of collinears for this band create transportation!
logistic issues, The antenna employs a machined brass coupling to
‘ensure long term integrity over the service life of the antenna,
30
RFI
ANTENNAS.
www.rfiantennas.comVHF Vertical Collinear Antennas
Cee
Cre
[tym
Ter oa
a
Typical VSWR response (C0118)
COLTS F Pane
“ical VSWR response (COL34-T1)
COLs# Th -E Pane
Electrical
Woda Rone COLTS I OH COLaaT
Nora a 55
Fragen HE 77% | T=
Tied Banda TOE
VSWR alr Los) SET
Torin enpeaarseT =
Varta Barve a I a
Honea Boar CATO
Tapa Powe 2H I To
Mechanical
Tose Ro COLE TOT COLETTE
consnctan Atanas auminum elements | APdnodaurrum eknts | yo pat aren jos wih bass
tn it args rade te regedznd black | ful Whe feng “aoe
ang ara BE 25 2
Wags a 178 ze
Termination ‘foal baka 177 of ROBO wit Noma
BAT dan See dam Ba dan
Mounting Area alodined aluminum alodined aluminurn stainless stool
Tagged CoE ZEUCT
Prowced [Nous EE 255 i5n
deat [wares as a0 35
Lateral Te @ 100
Es s 73 x
ToT 1s Tar TOE
Teague STOOPS at Ea 27
www.rfiantennas.com
31
$
RFI
ANTENNASVHF Vertical Collinear Antennas
earned
ery A series of “cut to frequency" 3 dBd gain vertical collinears. The
rrr range includes antennas suitable for simplex, duplex and heavy duty
Pret applications. These antennas are all rated at 200 watt input power.
They are DC grounded to provide maximum resistance to lightning
and reduction of precipitation static noise.
coLz2
This antenna is suited to single frequency applications in the 88-115
MHz band. The center fed two-element design eliminates distortion
of the radiation pattern and ensures @ vertical pattern free of
beamtit, The radiating elements are of welded aluminum
construction which minimize generation of intermodulation and
spurious products. The radiating elements are enclosed in a tapered
fiberglass radome which is fied to a 1.6” diameter alodined
aluminum mounting tube. The antenna is terminated with a fixed N-
type female connector which is easily accessible for sealing.
coLzs
This is a broadband duplex antenna for the 115-148 MHz band
specifically designed to cater for transmit to receive separations of
up to 4.8 MHz. The antenna is a series fed collinear which is
housed in a heavy duty tapered fiberglass radome, fitted to an
alodined aluminum mounting tube. The COL28 (and the electrically
identical COL29) have been specifically designed to maintain stable
vertical radiation pattem characteristics at the extremities of the
‘spot tuned bandwidth,
coLzs
‘The COL29 is electrically identical to the COL28 antenna and may
be used in duplex or simplex applications in the 115-148 MHz band,
‘The COL29 is a ruggedized antenna, designed for use in the most
extreme climatic conditions, The radome which houses the active
elements of the COL29 was originally designed to serve as the
mast of recreational sail boards and is immensely strong. The
radome is colored black to maximize solar heat retention and this
has been shown to aid significantly in ice shedding. A 2.4
aluminum mounting tube supports the radome, the alodine finish
providing a conductive surface to ensure effective earthing of the
antenna when mounted,
2 & wawsfiantennas.com
RFI
ANTENNAS.VHF Vertical Collinear Antennas
Typical WA reponse (C0122) ‘ypleal VSWR esponse (COLZ8)
A a
B el
cro Fanos see ral Bay
0122 - Pane cote - Pane
of me RQ
Electrical
Tocel Number COLE COLE I COLE
Narrinal Gan BT (HBG) 5a
Froguoney Me ws Tes
Tuned Bandi 1a 20%
VSWR Faturn Los] SET TY
Noranal npedaneo 3
Vertal Bearvith = =
zara Beara OAT SFOS
inp Power W a0
Mechanical
Mosel Number TOE I TOs [oo]
"Aas alain SETA
Construction ‘Nodined aluminum elements wth wht fberles radome ‘wih uagedized black
ergs radome
Tong ete Te 7
Wagers a aI I TH
Terninaen Aaa BOREAS
a dan 2x17 dan 20 x2a" dan
Mounting Area alodined aluminum alodined aluminum alodined aluminum
Sageated CRATE ZxUCT
Projecred [Nose Tar es EE
peat [wanes a3 25 307
Tater Trust @ T0079
a “0 “1 st
We CRAB Taz Tr 8
Torque GTOO mB hE 2 18 20
wwwitfiantennas.com & x
RFI
ANTENNASVHF Vertical Collinear Antennas
‘The 144-175 MHz COL range is a series of "cut to frequency"
3dBd gain vertical colinears, The range includes antennas
‘suitable for simplex, duplex and rugged applications, All of the
antennas include internal DC grounding for lightning protection
and the reduction of static noise. Drainage vents at the base
allow the antennas to ‘breathe’ and thus prevent condensation
build up. The alodine finish of the aluminum mounting tube
provides @ conductive surface which ensures effective earthing
when mounted,
coL15
‘The COL15 is a center fed two-element design which eliminates
distortion of the radiation patter and ensures a true
‘omnidirectional horizontal pattern. The radiating elements are
constructed from welded alodined aluminum to minimize
generation of intermodulation and spurious products. The
radiating elements are enclosed in a tapered fiberglass radome
which is fitted to an alodined aluminum mounting tube. This
lightweight antenna has minimal wind loading and is ideal for
‘mounting on moderate support structures.
cOLi7
‘The COL17 is suited for broadband and duplex applications
designed to cater for transmit to receive separations of up to 5.0
MHz. The antenna is a series fed collinear which is housed in a
heavy duty tapered fiberglass radome, fitted to a ruggedized
alodined aluminum mounting tube. The COL17 (and the
electrically identical COL3) have been specifically designed to
maintain stable vertical radiation pattern characteristics at the
‘extremities of the tuned bandwidth, ensuring reciprocity of
transmit and receive signal
coLs
‘The COLS is electrically identical to the COL17 antenna, The
COL3 is a ruggedized antenna, designed for use in the most
‘extreme climatic conditions, The radome which houses the
active elements of the COLS was originally designed to serve as
the mast of recreational sail boards and is immensely strong,
‘The radome is colored black to maximize solar heat retention
and this has been shown to aid significantly in ice shedding. A
large alodined aluminum mounting tube supports the radome.
coLss
‘The COL3S is a high gain omnidirectional collinear antenna
specifically designed for the most extreme conditions. It
incorporates sleeved broadband dipole elements enclosed with
a ruggedized, heavy walled fiberglass radome. The radome is
colored black to maximize solar heat retention and this has been
shown to aid significantly in ice shedding. A heavy duty hot dip
galvanized steel mounting tube supports the radome.
34
RFI
ANTENNAS.
www.rfiantennas.com