The in-line arrangement of hydraulic
pumps, engine, compressor, and cooler
provides easy access toall major components
for maintenance and service. This design
also provides a low center of gravity and
exceptional stability for the machine.
Notice the cooler is mounted up front,
away from the dust and dirt of the drilling
operation. This three core cooler assembly
ensures proper operating temperatures for
engine coolant, compressor oil, and hydraulic
oil in ambient temperatures up to 110° F
Seamless steel tubing is used
wherever possible for hydraulic lines on
the mast. Steel tubing requires less
maintenance than rubber hose and
provides better radiation cooling for
hydraulic oil. Hose is used only in areas
where flexibility is required
The rotary head provides 62,230
Ibs of torque with infinitely variable
rotary speeds up to 89 rpm. For special
applications, other speed and torque
combinations are available. The single
motor design is dependable and easy to.
maintain.D25K
Well Drill
Drill Power Unit
Diesel Engine
Rated Horsepower
Rated Speed
400 hp (298kW)
1800 rpm_
Compressor
‘Two Stage Oil Flooded Screw Type
Model 840 Pressure Rating ......350 psi (2412 kPa)
Rotation System
Hydraulic Top Drive with Axial Piston Motor
Rotation Speed. 0 to 106 rpm
Rotation Torque 51,400 in-tbs. (5808 Nm}
Rotation Speed. 0 to 89 rpm
Rotation Torque 62,230 in.lbs. (7032 Nm}
(other combinations available)
Hydraulic System
Closed-loop Hydrostatic System for Rotation;
Open-Circuit System for Feed and Auxiliary
Rotation Pump Variable volume;
pressure compensated axial piston
Feed and Auxiliary Circuit Pump....Dual Vane-type
Fan Circuit Pump Vane-type
Reservoir Capacity 125 gal. (474 liters)
External Drill Pipe Loader
Hydraulically Activated, Manual Index
Drill Pipe Capacity 6 pes., 20 ft. (6 m) long
Leveling
Four Jacks with Integral Check Valves
Stroke
Rear. 36 in. (915 mm)
Front. 48 in. (1219mm]
Lift Capacity (each) 50,000 Ibs. (22,700 kg}
Jack Pads 18 in. diameter (457 mm}
N
oda
ee
Post Office Box 338 + Alachua, Florida 32615 USA
(904) 462-4100 « Telex 56-8441 * FAX (904) 462-3247
Post Office Box 249, SF 33101 + Tampere, Finland
+(358}31-2414111 + Telex 22616 + FAX +(358)-31-123241
Feed System
Hydraulic Cylinder and Chain Feed/Hoist
Down Pressure 20,500 Ibs. (9307 kg)
Holdback 30,000 Ibs. {13,608 kg}
Chain Size
Standard 1 1/2 in. (38 mm)
Extra Price 13/4 in. (44 mm)
Drill Dimensions
Mast Down
Lenght 34 ft. 9 in. (10.6 m}
Width 8 ft. 0 in, (2.44 m)
Height (approx. depending on carrier) 12 ft. 9 in
(3.88 m)
Weight
Approx. operating wt. including typical truck and
300 ft. of 4 1/2 in. drill pipe. 50,000-54, 00Ibs.
(22,700-24,516 kg}
Mounting
Truck Mount not included with drill, Contact
Tamrock Driltech or your Tamrock Driltech distritu-
tor for suitable truck specifications.
Additional Standard Equipment
Compressor air line blow down
Air line lubricator
Night lighting system
Security cover for control panel
Air regulator for bit grinder
Machine washing kit
Lockable too! box
Remote fluid drains
48" jaw wrench with supports
Tow hooks & mud flapsIt takes two things to
make a drilling contractor suc-
cessful. The right people and
the right drill. Finding the right
people is your responsibility.
Building the right drillis ours. If
you're drilling 6 to8 inch water
wells or exploration holes to
depths of 1,000 feet or less,
the D2SK is the right drill for
you.
That's because the
D25K was designed with your
input. It has all the standard
features that you, the drilling
contractor, have asked for. Fea-
tures that you would expect to
pay extra for on competitive
machines. Features that make
your drilling operation efficient
and allow for easy mainte-
nance,
All this, backed by a
worldwide product support
team thatcan provide the parts
and service you need, when
you need them.D235
eT
Dat
The D25K is equipped with a drill pipe
storage trough that holds fifteen pieces of 20
ft. pipe. With 6 pieces in the loader, you can
carry 420 ft. of pipe right on the rig. The
trough also has a separate storage area for
carrying a stabilizer.
For easy access to the drill pipe and
injection system
A hydraulically operated 20 gpm water/foam injec-
tion system with controls located at the operator's station is
standard. Or, 9 gpm or 25 gpm models are also available.
trough, an expanded metal walkway that
Tuns the full length of the pipe trough and
across the back of the drill to the driller's
platform is provided. This walkway is stored
on the drill deck beneath the pipe trough
and can be assembled and disassembled in
minutes,Aremote helper's station includes con-
trols for operating the winch and jib boom.
Your driller's helper can handle drill pipe by
himself, while your driller is busy making
hole.
Designed with the
Cee mur]
Pram)
All setup and drilling controls and
gauges are conveniently located on the
driller’s control panel in functional groups
logically arranged for the drilling operation
sequences.
Aremote engine starting panel is also
mounted on the side of the engine and
includes engine start button, safety shut
down by-pass button, engine stop button,
and ether injection system.
Tamrock Driltech’s patented hydrauli-
cally activated six position drill pipe loader is
mounted externally on the mast and manu-
ally indexes for fast, easy addition or removal
of drill pipe
And, ifyou want to trip in or out of the
hole using the winch and jib boom, a sup-
port bracket allows you to use the full 7,500
Ib* lifting capacity of the winch directly over
the hole.
are drum ratingPOMC End
economy and long life
The D25K is powered by an XL series
Caterpillar 3406 DITA diesel engine rated
400 hp at 1800 rpm. This XL series engine
can provide you with substantial fuel sav-
ings, as well as increased engine life when
compared to competitive engines develop-
ing rated horsepower at 2100 rpm. The dual
air intake system provides separate air induc-
tion for the engine and compressor for
maximum efficiency and dependability.
Compressor system designed for
eer ge ea Cee tits
The D25K features a model 840/350
two stage compressor. The compressor sys-
temis designed by Tamrock Driltech and can
be serviced by any Tamrock Driltech dealer.
And, if your drilling operations re-
quire a lot of time tripping in and out of the
hole, an optional manual clutch is available
to disengage the compressor from the drill
engine (available at extra cost)
On a sub-frame mounted rig like the
D25K, it is important to have a jack system
that doesn'toverstress the carrier frame when
the rig is resting on the jacks and drilling.
That's why we've put four jacks on this ma-
chine, all of which are welded directly to the
drill frame, not the carrier frame.
Each jack has a 50,000 Ib. lifting
capacity. And for leveling the drill on ex-
tremely uneven terrain, 36 in. stroke rear
Jacks and 48 in. stroke front jacks are stan-
dard.Saad
aa
Ex
a
D235
Well Drill
The standard D25K is
mounted on a rugged 6 x 4 Ford
LNT 8000 truck. A 270 hp diesel
engine provides plenty of power for
maintaining highway speeds or
climbing steep hills. A 6 x 6 model
is also available for enhanced ma-
neuverability in mud or sand.
Or, since the D25K is as-
sembled on a sub-frame, it can be
mounted on any truck that meets
required specifications. The D25K
can even be mounted on a trailer.