Professional Documents
Culture Documents
Solutions
Switch
Entrance
with
fever screening face
recognition terminal
Entrance
with
fever screening face
recognition terminal
Entrance
with
fever screening face
recognition module &
swing barrier
Entrance
with
fever screening metal detector
door
Solution Introduction
Results display
Abnormal body
Authenticated temperature
David David
ID: 233 ID: 233
Wall mounting/
Deployment floor standing with mounting pole
Plug & play, floor standing Face recognition module for barriers
Products Introduction - Highlights
Fever screening face recognition terminal
DS-K5671-3XF/ZU
Products Introduction – Thermal Technology
Comparison between thermal imaging and thermopile technology
Thermopile technology Thermal imaging technology
Measuring the maximum temperature value in a fixed small area. After Generating hot try by measuring the temperature of all the objects in
face authentication, the maximum temperature value of the fixed area is the measuring scale, detecting faces by AI algorithm, and extracting
obtained for display. the temperature of forehead.
Since the thermopile itself cannot detect faces, it cannot ensure that face The thermal module matches the forehead temperature and face to
temperature is measured, or whether it was the authenticated person . ensure the authenticity and validity of temperature measurement.
Forehead temperature
measurement by AI algorithm
Temperature:36.9℃
Temperature:43.3℃
High-temperature
Fixed area of Fixed area of
object (hot water)
measurement measurement
Hot try
Summary:The thermopile solution is limited by technology. It can only measure the Summary:Based on thermal imaging facial temperature measurement scheme, the
"fixed area temperature" and the scale is limited, the authenticity and validity of temperature temperature tester's hand-held high-temperature object (hot water cup) does not affect the
measurement highly rely on personnel fitness. temperature measurement result.
Products Introduction – Thermal Technology
Comparison between thermal imaging and hot reactor technology
Type Thermopile Thermal imaging Comments
Resolution 32X32 120X160 ——
Measurement scale Small, fixed area of the screen Large scale, any area within the screen
Thermopile:
Because the heating person can avoid the
No need deliberate cooperating, except for fixed temperature area through the face to
Adaptability Asking for high adaptability of personnel avoid the real temperature of the
entering the screen
measurement of forehead, affecting the
validity of the temperature measurement
Efficiency 5 s/person 1 s/person
results, and temperature measurement
Face detection and face forehead accuracy is affected by the adaptability,
Temperature measurement can not be suitable for manual operation or participation
Measurement and face temperature accurate match, "one face, one
matched accurately, authenticity and validity in the temperature measurement scene and
matching temperature", temperature measurement
of temperature measurement are limited. products, such as hand-held temperature gun.
data is true and effective.
Temperature measurement area is limited, Face detection tracking, guaranteed
Thermal imaging:
the measurement subject can not be measurement is the temperature of my
Measurement error After detecting the face, get the temperature
guaranteed, will be any part of me or other forehead, and the true body temperature is
value of the face forehead in the heat attempt,
objects within the screen temperature similar.
the temperature measurement person's face
The temperature measurement process information and the face forehead temperature
Temperature measurement process requires
requires the management personnel to accurately match
Labor cost little involvement of managers, and labor cost
participate in the whole guide, the labor cost
is low
is high
Application Scenarios
Application Scenarios
Note: Indoor installation is recommended for accuracy of temperature measurement (without wind).
Thanks
See far, go further