Professional Documents
Culture Documents
--------------------------------------------------------------------------------
Software name Lenovo HID HW Radio Driver
Version 1.0.0.54
--------------------------------------------------------------------------------
WHAT THIS PACKAGE DOES
This package installs the HID HW Radio Switch driver to enable the hardware
switch.
Refer to marketing materials to find out what computer models support which
hardware switch for radios.
This program is language independent and can be used with any language system.
--------------------------------------------------------------------------------
CHANGES IN THIS RELEASE
Version 1.0.0.54
This is the initial release.
[Important updates]
- Added support for Microsoft Windows 10 32-bit,64-bit.
- Added support for Microsoft Windows 8.1 32-bit,64-bit.
[Problem fixes]
- Corrected an instruction in the Unattended Install section.
(Old) 3. At the command line, execute setup.exe with the /K -SMS options.
Example: [Path where the files were extracted]\setup /K -SMS
(New) 3. At the command line, execute setup.exe with the /K /SP- /VERYSILENT
/NORESTART /SUPPRESSMSGBOXES options.
Example: [Path where the files were extracted]\setup /SP- /VERYSILENT
/NORESTART /SUPPRESSMSGBOXES
--------------------------------------------------------------------------------
DETERMINING WHICH VERSION IS INSTALLED
1. Hold down the Windows logo key and press X to open a menu at the lower-left
area of the screen.
2. Select Device Manager from the menu.
3. Select Lenovo HID Mini-driver properties.
4. In the Driver tab, check Driver Packaging Version.
--------------------------------------------------------------------------------
NOTES
Noting.
--------------------------------------------------------------------------------
INSTALLATION INSTRUCTIONS
Notes:
- If your computer runs satisfactorily now, it may not be necessary to update
the software. To determine if you should update the software, refer to the
Version Information section.
- Before update, uninstallation of current driver is recommended. Refer to the
Uninstallation Instructions section.
Manual Install
Downloading file
1. Select the underlined file name. Once this is done, some pop-up windows
will appear.
2. Follow the instructions on the screen.
3. When the selection message of the Run or Save on the window, select Save.
4. Once the download has completed, there may or may not be a message stating
that the download completed successfully.
Extracting file
5. Make sure to be logged on with an administrator account.
6. Locate the folder where the file was downloaded.
7. Locate the file that was downloaded and double-click/double-tap it.
8. Follow the instructions on the screen.
9. In the Select Destination Location window, select Next. If you would like
to select a different folder, select Browse.
10. In the Ready to Install window, select Install. All the necessary files
will be extracted to the folder selected in the step 9.
Installing files
11. Make sure the checkbox next to "Install ..... now" is checked and select
Finish.
12. Follow the instructions on the screen to complete installation and restart
the computer.
Unattended Install
1. Refer to the Manual Install section, and download and extract the file.
2. In the step 11 of the Installing files section, uncheck the checkbox next
to "Install ..... now", and then select Finish to cancel installation.
3. At the command line, execute setup.exe with the /K /SP- /VERYSILENT
/NORESTART /SUPPRESSMSGBOXES options.
Example: [Path where the files were extracted]\setup /SP- /VERYSILENT
/NORESTART /SUPPRESSMSGBOXES
--------------------------------------------------------------------------------
UNINSTALLATION INSTRUCTIONS
Manual Uninstall
--------------------------------------------------------------------------------
VERSION INFORMATION
Summary of Changes
<1.0.0.54>
- (New) Added support for Microsoft Windows 10 32bit,64-bit.
<1.0.0.54>
- (Fix) Corrected an instruction in the Unattended Install section.
(Old) 3. At the command line, execute setup.exe with the /K -SMS options.
Example: [Path where the files were extracted]\setup /K -SMS
(New) 3. At the command line, execute setup.exe with the /K /SP-
/VERYSILENT /NORESTART /SUPPRESSMSGBOXES options.
Example: [Path where the files were extracted]\setup /SP-
/VERYSILENT /NORESTART /SUPPRESSMSGBOXES
<1.0.0.54>
- [Important]
Added support for Microsoft Windows 8.1 32-bit,64-bit.
<1.0.0.54>
- (New) Initial release for ThinkPad T430,T430i,T530,T530i,W530,T430s,T430i,X230,
X230i,X230 Tablet,X230i Tablet,X1 Carbon.
--------------------------------------------------------------------------------
TRADEMARKS