Professional Documents
Culture Documents
02
01
01 02 03 04 05
Control Tilting of the Digital readout for Label printer Intermediate
moving cutting intermediate angles (optional) support
heads (optional) (optional)
The user-friendly control The heads rotation around When there is pneumatic The industrial label printer The pneumatic
panel installed on the the horizontal axis happens tilting of the moving cutting allows identification of intermediate support
various models, runs on through pneumatic heads, the intermediate angle each cut profile with the proves highly useful
bearings and allows cylinders and the readout allows exact profile I.D. data originating when cutting light
correct positioning of obtainable angles, vary identification of the tilting of from the cutting list. In profiles with
the moving cutting from 90° up to 22°30’ the cutting head, thereby addition, the printing of considerable lengths.
heads according to external; the average ensuring accuracy of the cut bar codes permits easy In such case the
cutting specifications. angles are obtained profiles. This device, which is identification of the actual pneumatic support
The work cycle is through suitable, manually specially useful in making cuts profile, which is automatically seeks to
optimized through adjustable, stops. The at intermediate angles, allows particularly useful for create the ideal
creation of the cutting mobile units are equipped the operator to identify the subsequent machining condition to support the
lists thus reducing scrap with protections with required angular setting phases on the machining profile.
as well as workpiece pneumatic descent of the quickly and accurately. centers or on assisted This accessory is
loading/unloading times. working area. assembly lines. available for all lengths,
but it is especially
recommended on
machines with cutting
capacity of 5 and 6
metres.
Cutting chart
CONTROL CHARACTERISTICS
MACHINE CHARACTERISTICS
Measurement of moving cutting head position via direct measuring system with magnetic tape
2 carbide-tipped blades
Full guard for cutting zone, pneumatically operated
Pair of pneumatic horizontal and vertical clamps with “low pressure” device
Profile support roller conveyor
Lubrication system, spray-mist lubrication with oil and water emulsion or minimum quantity oil lubrication (depending on version)
Cutting angles with blade Ø 450 and 500 mm from 22°30’ (external) to 90°
Manual profile support
Predisposition for automatic start of swarf exhauster MG
Pair of standard counterblocks
Metric scale
Cutting capacity 4/5/6 m depending on model
Blade motor power rating (kW) 2.2