Professional Documents
Culture Documents
04
2
2600T Pressure Transmitters
Model 265GS, 265AS SS/265GS/AS_4
3
2600T Pressure Transmitters
Model 265GS, 265AS SS/265GS/AS_4
4
2600T Pressure Transmitters
Model 265GS, 265AS SS/265GS/AS_4
5
2600T Pressure Transmitters
Model 265GS, 265AS SS/265GS/AS_4
URL
– ±(0.04 + 0.005 x Span – 0.05)% for TD greater than 10:1
6
2600T Pressure Transmitters
Model 265GS, 265AS SS/265GS/AS_4
Packing
Carton 24 x 14 x 19cm approx (10 x 6 x 8in).
7
2600T Pressure Transmitters
Model 265GS, 265AS SS/265GS/AS_4
8
2600T Pressure Transmitters
Model 265GS, 265AS SS/265GS/AS_4
Space must be
114 (4.49) 23 (0.91) with LCD indicator available to rotate
the key-board cover
9 (0.35) 58 (2.28) 20 (0.79)
26 (1.02)
124 (4.88)
140 (5.51)
Housing rotation
Additional tag
76 (2.99)
stop screw
plate
A
29
(1.14)
28
(1.10) Process
56 (2.20) connection
9
2600T Pressure Transmitters
Model 265GS, 265AS SS/265GS/AS_4
Space must be
available to rotate
the key-board cover 100 (3.94) 23 (0.91)
26 58 (2.28)
Additional tag 70 (2.76) 20 (0.79)
(1.02)
plate
20 (0.79)
136 (5.35) / *140 (5.51)
124 (4.88)
Housing
cover
76 (2.99)
A
Electrical connection
(with gland)
48 (1.89) Process
connection
61 (2.40)
*16 (0.63)
12 (0.47)
83 (3.27)
* dimensions of sensor code L, U, R, V
Plate with
Dimension "A" is dependent upon range and process connection: keys legend
10
2600T Pressure Transmitters
Model 265GS, 265AS SS/265GS/AS_4
114 (4.49)
9 (0.35) 58 (2.28)
Weld-on adaptor and socket
Front bonded diaphragm
ø 50
ø 21.3 -0.2
Chamfer after tapping
G 1/2
172 (6.77)
ø 19.4 +0.1
0.1 A
width across
flats 27mm
10.5
min.
15 -0.2
29 groove for sealing
21
(1.14) ring DIN 3869-21
(18.5x23.9x1.5)
(0.81)
20.5
G 1/ 2 B
groove for O-ring (15x2)
A
18 (0.71) ø 18.2 +0.1
10 (0.39)
Burrless.
28
(1.10)
56
(2.20)
272 (10.71)
222 (8.74)
Vent hose
25 (0.98)
146 (5.75)
width across
(1.46) (0.79)
flats 36mm
20
G1in
37
Conical seal
Washer metal / metal
(hygienic design)
(1.14)
The diaphragm is
29
process-bonded
25 (0.98)
29.6
(1.17)
diaphragm~Ø: ~20 (0.79)
11
2600T Pressure Transmitters
Model 265GS, 265AS SS/265GS/AS_4
72 (2.83)
101 (3.99)
81 (3.19)
197 (7.76)
20 (0.79) 39 114 (4.49) 23 (0.91) 177 (6.97)
(1.54) 9(0.35) 58 (2.28) 20 (0.79) 39 114 (4.49) 23 (0.91)
(1.54) 9(0.35) 58 (2.28) 20 (0.79)
97 (3.82)
97 (3.82)
110 (4.33)
72 (2.83)
44(1.73)
60 (2.36)
118 (4.65) 44
(1.73)
60 (2.36)
98 (3.86)
Note : Bracket both for pipe and wall mounting provides four holes of 11mm (0.44in) diameter on square with 72mm (2.84in) side
12
2600T Pressure Transmitters
Model 265GS, 265AS SS/265GS/AS_4
Electrical connections
Standard Terminal block and fieldbus connector versions
Cable entry
2 4
M12 x 1 connector
Screw terminals for 2
0.5...2.5mm2 – wires
3 1
89 (3.5)
1 2
+
51 (2.01)
26 (1.02)
13
2600T Pressure Transmitters
Model 265GS, 265AS SS/265GS/AS_4
14
2600T Pressure Transmitters
Model 265GS, 265AS SS/265GS/AS_4
XX XX XX XX XX XX XX XX XX XX XX
Electrical certification
ATEX Group II Category 1/2 GD – Intrinsic Safety EEx ia E1
ATEX Group II Category 1/2 G – Flameproof EEx d (Note 2) E2
ATEX Group II Category 3 GD – Type of protection "N" EEx nL energy limited E3
Factory Mutual (FM) – Intrinsically Safe EA
Factory Mutual (FM) – Explosion Proof (only with 1/2 – 14 NPT electrical connection and SS label) (Note 2) EB
Canadian Standard Association – Intrinsically Safe (pending) ED
Canadian Standard Association – Explosion Proof (Note 2) EE
Integral LCD
Digital LCD integral display L1
Backlit digital LCD integral display L2
Mounting bracket (shape and material)
For pipe mounting AISI 316 L ss B2
For wall mounting AISI 316 L ss B4
Surge
Surge/Transient Protector (Note 7) S1
Operating manual
German M1
Preparation procedure
Oxygen service cleaning (only available with inert fill and for sensor code C, F Viton gasket – Pmax=21MPa/210bar/3045psi; P1
Tmax=60° C/140° F)
Certificates
Inspection certificate EN 10204– 3.1.B of calibration C1
Inspection certificate EN 10204– 3.1.B of the cleanliness stage according to DIN 25410 C3
Inspection certificate EN 10204– 3.1.B of helium leakage test of the sensor module C4
Inspection certificate EN 10204– 3.1.B of the pressure test C5
Certificate of compliance with the order EN 10204– 2.1 of instrument design C6
Germanischer Lloyd approval C8
SIL2– classification CL
Material traceability
Certificate of compliance with the order EN 10204– 2.1 of process wetted parts H1
Inspection certificate EN 10204– 3.1.B of process wetted parts (small parts with certificate of compliance EN 10204) H3
Test report EN 10204-2.2 of the pressure bearing and process wetted parts H4
Connector
Fieldbus 7/8in (without mating female plug) Recommended for FOUNDATION Fieldbus (Notes 6, 8) U1
Fieldbus M12x1 (without mating female plug) Recommended for PROFIBUS PA (Notes 6, 8) U2
Harting Han 8U – straight entry (Notes 5, 8) U3
Harting Han 8U – angle entry (Notes 5, 9) U4
15
2600T Pressure Transmitters
Model 265GS, 265AS SS/265GS/AS_4
THE SELECTION OF SUITABLE WETTED PARTS AND FILLING FLUID FOR COMPATIBILITY WITH THE PROCESS MEDIA IS A CUSTOMER'S
RESPONSIBILITY, IF NOT OTHERWISE NOTIFIED BEFORE MANUFACTURING.
16
2600T Pressure Transmitters
Model 265GS, 265AS SS/265GS/AS_4
17
2600T Pressure Transmitters
Model 265GS, 265AS SS/265GS/AS_4
XX XX XX XX XX XX XX XX XX XX XX
Electrical certification
ATEX Group II Category 1/2 GD – Intrinsic Safety EEx ia E1
ATEX Group II Category 1/2 G – Flameproof EEx d (Note 2) E2
ATEX Group II Category 3 GD – Type of protection "N" EEx nL energy limited E3
Factory Mutual (FM) – Intrinsically Safe EA
Factory Mutual (FM) – Explosion Proof (only with 1/2 – 14 NPT electrical connection and SS label) (Note 2) EB
Canadian Standard Association – Intrinsically Safe (pending) ED
Canadian Standard Association – Explosion Proof (Note 2) EE
Integral LCD
Digital LCD integral display L1
Backlit digital LCD integral display L2
Mounting bracket (shape and material)
For pipe mounting AISI 316 L ss B2
For wall mounting AISI 316 L ss B4
Surge
Surge/Transient Protector (Note 7) S1
Operating manual
German M1
Preparation procedure
Oxygen service cleaning (only available with inert fill and for sensor code C, F Viton gasket – Pmax=21MPa/210bar/3045psi; P1
Tmax=60° C/140° F)
Certificates
Inspection certificate EN 10204– 3.1.B of calibration C1
Inspection certificate EN 10204– 3.1.B of the cleanliness stage according to DIN 25410 C3
Inspection certificate EN 10204– 3.1.B of helium leakage test of the sensor module C4
Inspection certificate EN 10204– 3.1.B of the pressure test C5
Certificate of compliance with the order EN 10204– 2.1 of instrument design C6
Germanischer Lloyd approval C8
SIL2– classification CL
Material traceability
Certificate of compliance with the order EN 10204– 2.1 of process wetted parts H1
Inspection certificate EN 10204– 3.1.B of process wetted parts (small parts with certificate of compliance EN 10204) H3
Test report EN 10204-2.2 of the pressure bearing and process wetted parts H4
Connector
Fieldbus 7/8in (without mating female plug) Recommended for FOUNDATION Fieldbus (Notes 6, 8) U1
Fieldbus M12x1 (without mating female plug) Recommended for PROFIBUS PA (Notes 6, 8) U2
Harting Han 8U – straight entry (Notes 5, 8) U3
Harting Han 8U – angle entry (Notes 5, 9) U4
18
2600T Pressure Transmitters
Model 265GS, 265AS SS/265GS/AS_4
THE SELECTION OF SUITABLE WETTED PARTS AND FILLING FLUID FOR COMPATIBILITY WITH THE PROCESS MEDIA IS A CUSTOMER'S
RESPONSIBILITY, IF NOT OTHERWISE NOTIFIED BEFORE MANUFACTURING.
19
Contact us
www.abb.com