PEL-JOB COMPACT EXCAVATOR
Pel-Jobi SOLID AS A ROCK
COMPACT EXCAVATOR
EB450x,
Even more efficient !
Like all PelJob machines, the EB
450 develops an impressive level
of performances. The bucket for-
ces and digging depth are amon-
gst the best on the market to give
you improved productivity on all
your sites. 2 i
New Load-Sensing syste
never has a compact excavator
been so easy to operate.
Power, srocthness, independence of move
ments: the nev hydraulic Load'Sensing cirout
fitted to the EB 450 machines represents the
best available technology.
Excellent equipment
performances
The bucket has a very larg range of move
rent: over 200" This charactorstc ovarane
tees @ good attack and square excavations at
ail depths.
Anew X-shaped undercarriage Compact rear impact
This X shape makes for a better distibution of the leads on The very compact dimensions
the side members, giing more rigidity and sturdiness. The of the new PolJob machines
(0p part of the side members slopes to prevent earth depe- enable them to work safely on
siling itself thore and to make t easier to clean. the narrowest sites. The wrap
A sturdy top chassis
The double-yoke pivot mult
pls the bearing eurtace on
the chassis by two and ena
bles a long pin to be fitted
for a better distibution of
stress and therefore less
wear and less slackening
Long chassis for more stabi
‘The considerable length ofthe tracks provides:
excoptional stability and offers more output
and safety, whilst reducing ground pressureprotection
around shape of the counter
weight provides the machine
with @xeallent pretection
agains all mpacts.
‘ect slewing
crown wheel drive
This hydraulic motor drives
the crown wheel directly,
without a reduction gearNo
wear and no play in the
crown wheel dive, therefore
no maintenance costs to
allow fr.
The boom offset for working
alongside a wall
‘The hydraulic offset of the boom makes it possible o reduce
the overall dimensions of the excavator and to work alonget
dea wall
‘Smooth operation
The cushions on the rams
and the Hydrosensor vale
fon the hydraulic. slewing
motor ensure smooth move
mont
\dependence of all
movements
‘The new hydraulic Load-Sensing circuit ena
bles all the machine's controls to be combi
ned. Traveling in a straight line is maintained
even when other movements are actuated.
Pel-Job quick coupl
The exclusive Pel-Job quick coupling enables an
accessory ora bucket tobe hooked quickly wih
‘ut leaving the operator's cab. Unlocking can be
either mechanical or hye.
Locking of the offset ram
The offset ram is equipped with a balancing
valve, which blocks the ram and peevents i
from sliding. The resuit: the boom's offset is
sally held in the position chosen by the ope
rator even during long and dificult workCOMPACT EXCAVATOR
EB450 wr
Safe access to the operator's
cab
To facilitate access to the operators cab, the
‘cab door offers a wide opening, and the con-
sole swings up out of the way. The cab floor
and step are non-slip and combined with two
‘wide grat hancles.To avoid any rik ofan acct
dent when the operator gets into or out ofthe
cab, all of the machine's controls are locked
when the left console is raised. This locking
also concerns the travel controls which are
looked in the neutral
position when the
Console is raised,
AVERY HIGH LEVEL OF COMFORT AND
Excellent visibility
Thanks to the cabs very large glazed surface
area, visibility all round the excavator is excel
lent. This ean important safety element for the
property and people in the vicinity of the
machine when it sin use, particularly on nar
row or congested sites. The rounded contour
‘and very compact chape of the engine cover
also provides good visibility tothe rear.
Aperfect
operating position
The Pel-ob operator's cab has been the sub
ject of extensive ergonomic studies to make
the operating postion as pleasant as possible
and to reduce operator fatigue The sprang
beat can be agusted in mary ways to suit he
operator's morphology
A spacious and comfortable
cab
‘The EB 450's cab offers incomparable com:
fort and operating quietness. Even tall opera
tore immediately foel at ease inthis generously
sized cab,
Operator information
Placed within the operators ine of sight, the
instrument panel groups together al the useful
machine contr! information. An ant-thett key
ad, available as an option, enables machine
Starting and the main hycraulic functions to be
locked.SAFETY
Ergonomically-designed
armrests,
The short responsive manipulators avoid
excessive operating movements and reduce
fatigue. The positon of the forearms resting on
the ergonomically designed armrests permits
vary procise control of the manipulator,
Perfect accessibility of the
hydraulics compartment
‘The control valves and allo the hydraulic com
Ponents are located in a hydraulics compart
ment located on the side of the machine to
facilitate accass,
FOPS 1, ROPS and TOPS
protection
The EB 450's cab has a very high level of
safety, guaranteed by the FOPS 1. (Falling
Phject Protection Structure), ROPS and
TOPS (Roll and Tip Over Protection
Structure) ceritcations. The seatbelt is part of
the standard equipment
Exclusive to Pel-Job:
the opening counterweight
This PelJob innovation permits excellent
accessibility of the engine compariment whilst
providing total protection to the rear of the
machine thanks to the wrapraround shape of
the counterweight
Loose fitting hoses at the base
of the boom
Allof the hoses which supply the boom are
tod loose, without going into the pivot, and are
Connected on the outside of the machine They
are thus subject to neither rubbing nor wear,
and can easily be replaced if necessary,Watercooled Mitsubishi 4-cylinder diesel engine.
Mod nse 7 o KAN
Gross power, rated (ISO 9248) ...31 KW (42 hp) at 2600 r/min
Power, installed ISO 9249).....27.2 kW (87 hp) at 2000 emin
Displacement, total... ~ 2290 ec
Masirum torque 180 9248) von 37 Nm at 1400 efmin
Bore « stroke a. {80 mm x 90 mm
Rated voltage. 42v
Battery capacity 42V-70.Ah
Alternator rating 42-40,
Starter motor output. mA2V- 2 KW
o
Closed centre Load Sensing hydraulic system providing total
independence of each movement.
Contr nn .-power-assisted hydraulic controls
Variable displacement Load Sensing pump for all the equip-
‘ment and travel circuits:
Masini F100 nn
Maximum operating pressure
se 99 Vin
[26 MPa (260 bars)
Gear pump for the power assistance circuit:
Maximum flow...
Maximum operating pressure
Double-acting hydraulic circuit for accessories:
Mam 1% on
Maximum operating pressure
60 Urn
"28 MPa (260 bars)
End-of-stroke cushions
(On boom raion
(On dipper ram.
On offset ram...
atthe end of the rod extension
“atthe end of the od retraction
1on both sides
Offset ram lock
The equipment’s offset ram is equipped with a balancing valve
hich holds the boom offset angle in the postion chosen by the
‘operator in all working conditions
Tumtable slewing is provided by a radial piston hydraulic
motor which drives directly (without a reduction gear) a ball
internal crown wheel with remote lubrication.
Slowing Sp200 -ennnnnnne ~ sos 4 tdi
Turntable braking “automatic mul-disc brake
‘Absorption of hydraulic shocks... Hydrosensor shockless valve
Tearout force
‘The undercarriage is made up of an "X" box fabricated centre
paar for more rigiity and of sloping side members for a better
clearance of materials. The rollers and the tensioning wheels
are lubricated for lite.
Bottomitop rollers per Sid@ nnn
Track width 7
Track tension o by grease piston
Blade (width x height) soe 1B50 x 970 mam
The blade cylinder is equipped with a safety valve.
Each track is driven by an axial piston hydraulic motor equip-
‘ped with two speeds and an epicyclic reduction gear. Braking
is performed automatically by an oil bath multiple disc broke
‘on each motor.
Max. speed (low speed! high speed)
Max. tractive force
29 kann / 4:3 krvh
mns4080 dN
‘The forward movement contral is automatically locked when the
‘operator raises the left console.
Fuel tank see 8B |
Hydraulic system, total = aaa ball
Hydraulic tank a - |
Engine oi 7 - waa
Cooling system = te I
Operational weight and ground pressure:
Rubber Tracks Stoel Tracks
version 4250 kg 4387 kg
cae 0.28 kg/em* 0.26 kglem*
Results of dynamic measurements:
95 BIA)
Noise level exterior (LWA) nes
fesnnnT® OBA)
[Noise level in the cab (Lp),
The noise lovels conform to directive n° 86/662 EEC and its
‘amendments,oust a) 9 za say Pa ee
Sanson | ees
ef | Le [ao [ae [am [nn [ae [oe
‘bucket 450 mm 66 kg 80!
eae | wane Ran
as
1300 mm 125 kg, 1641 & iS ei 3 ¥ ul ua
a
‘These capacities are given for 2 machine without a buoket or quiak release coupling
‘and fitted with rubber tracks for a 360° total rotation lted load.
“The hancling capacity is 75% of the tipping load or 87% ofthe hydraulic it
Caution: the load ited must not exceed 1000 kg on @ machine not ited with a safe-
ty valve on the boom ram, in accordance with EN standard 474-5.
Ling capaciy oa lation ver 960° with the lade rine. "hau it 9)Dry-type air ft
Electric pre-neating device.
‘Transparent diese ol filter, pre-
fiter and sediment chamber,
Purge plug under the diesel ol
tank
il sump sheet metal guard
Continuous adjustment of eng
ne speed,
Electrical system
12.V-70 Ah battery
Horn.
112 V power socket for inspec-
tion lame,
Undercarriage
4400 mm wide rubber tracks.
Dozer blade,
‘Towing and anchoring rings.
Romote lubrication of the sle-
wing crown ting,
‘Salely valve on the blade eyln-
er.
Hydraulic system
ISO power-assisted hydraulic
‘contro
‘Additional double-acting
hydraulic contre valve for an
altachment circuit wth folding
‘control pedal and circuit for
direct return of ol tothe
hydraulic tank.
Attachment circuit piping
(double-acting + return) as far
{a the bottom of the boom,
Power-assisted control of the
hycraulic offeot of the boom by
the let control lever.
Contr! of forward movement
by two levers coupled to
pedals
Cab
Level 1 FOPS (Faling Objects
Protective Structure)
TOPS (Tip-Over Protective
Structure).
ROPS (Rol-Over Prot
Structure)
Mult-adjustable sprung
consoles-seat assembly,
Fabric-covered superior comfort
seat.
NNorrslip floor with two foot
rests.
Grab handles for access to the
dtive’s cab.
Seat bett
Cab mounted on rubber moun-
tings.
Two working lights
Two-speed heating and ventila:
tion.
Cab heating adjustment.
Windscreen with opening sys:
tem powerassisted by two gas
Quickly removable front bottom
window, and window fing Sup-
port behind the seat.
Sliding window (right
Door stops.
Provision fora racio (lation
for a radio and two speakers,
‘aerial and electric wiring already
fitted).
Interior lighting.
‘Ant-corrosion protection of the
‘cab by electrophoresis.
Windscreen wipor and washer
(ron,
Emergency exit via the front
window.
Instrumentation and monito-
ring
PUMA 2 on-board message
transfer contol cireuit providing
Continuous monitoring ofthe
machine,
‘Monitoring and warning light for
the following functions: pre-hea-
ting, engine oil pressure, water
temperature, hydraulic ol tem
perature, battery charging,
hydraulic fiter restriction, ar fi.
ter restriction.
Fuel gauge with minimum level
warning light.
Total elapsed hour meter.
Partial elapsed hour meter with
controlled reset.
Rev. counter.
Display of machine's serial num:
‘ber (antithett marking).
Daviee for automatic switching
off of engine in the event of
‘overheating or drop in oil pros
Handing and earthwork
‘equipment
2600 mm long monobloc
‘b00m,
1400 mm dipper.
140° hydraulic boom offset
Non-eturn valve on the offset
‘Cushions on the boom, dipper
and offset rams.
Handling equipment for a load
less than 1000 kg (hooking