Professional Documents
Culture Documents
ICO3S - 2/2, 3/2 or 5/2 Poppet Valves Electromagnetically Actuated, Direct Solenoid Operated
ICO3S - 2/2, 3/2 or 5/2 Poppet Valves Electromagnetically Actuated, Direct Solenoid Operated
Technical features
Medium: Flow: Temperature: Materials:
Hydraulic and pneumatic – 0,6 Cv (8,7Kv) ... 3.3 Cv (46.4 Kv) Media: Valve body, trim, coil housing and
customer to specify and confirm Port size: -55 ... +90°C (-67 ... 194°F) top cover:
compatibility G 1/4, 1/2 NPT, G 1/4, G 1/2 Ambient: stainless steel 1.4404 (316 L)
Operation: NAMUR or manifold versions See table on page 2 O-rings seats & seals: NBR
Direct solenoid operated Operating pressure: Air supply must be dry enough to
poppet valves 0 ... 12 bar (0 ... 174 psi) avoid ice formation at temperatures Other seal materials available
Mounting position: below +2°C (+35°F). on request
Solenoid vertical
5/19
Our policy is one of continued research and development. We therefore reserve the right to amend, without notice,
the specifications given in this document. (2012 - 5197d) © IMI Precision Engineering, Thompson Valves Ltd. en 5.7.540.01
ICO3S - 2/2, 3/2 or 5/2 poppet valves
Electromagnetically actuated, direct solenoid operated
2 1/4 NPT 2/2 NC 0 ... 12 JSMO*1) Ex II 2 GD, Exd IIC 3 T6 (-55 … +50°C), T4 (+90°C max) 2.0 2 Y011SA1H1BS
G 1/4 2/2 NC 0 ... 12 JSMO*1) Ex II 2 GD, Exd IIC 3 T6 (-55 … +50°C), T4 (+90°C max) 2.0 2 Y011SE1H1BS
1
1/4 NPT 3/2 UNI 0 ... 12 Without Ex II 2 GD, Exd IIC 3 T6 (-55 … +50°C), T4 (+90°C max) 2,0 3 Y013AA1H1BS
2
G 1/4 3/2 UNI 0 ... 12 Without Ex II 2 GD, Exd IIC 3 T6 (-55 … +50°C), T4 (+90°C max) 2,0 3 Y013AE1H1BS
V-32C-E-F
1/2 NPT 3/2 UNI 0 ... 12 Without Ex II 2 GD, Exd IIC 7,8 T6 (-55 … +50°C), T4 (+90°C max) 2,5 4 Y013AA3H1BS
1 3
G 1/2 3/2 UNI 0 ... 12 Without Ex II 2 GD, Exd IIC 7,8 T6 (-55 … +50°C), T4 (+90°C max) 2,5 4 Y013AE3H1BS
2 1/4 NPT 3/2 UNI 0 ... 12 JSMO* Ex II 2 GD, Exd IIC 3 T6 (-55 … +50°C), T4 (+90°C max) 2,5 5 Y013SA1H1BS
2
V-32C-EH-F
G 1/4 3/2 UNI 0 ... 12 JSMO* Ex II 2 GD, Exd IIC 3 T6 (-55 … +50°C), T4 (+90°C max) 2,5 5 Y013SE1H1BS
1 3
1 3
22 1/4 NPT 3/2 UNI 0 ... 12 TPMR*1) Ex II 2 GD, Exd IIC 3 T6 (-55 … +50°C), T4 (+90°C max) 2,5 6 Y013TA1H1BS
GV-32C-ER-F
1/4 3/2 UNI 0 ... 12 TPMR*1) Ex II 2 GD, Exd IIC 3 T6 (-55 … +50°C), T4 (+90°C max) 2,5 6 Y013TE1H1BS
11 33
1/4 NPT 3/2 UNI 0 ... 12 PBMO*1) Ex II 2 GD, Exd IIC 3 T6 (-55 … +50°C), T4 (+90°C max) 2,0 7 Y013PA1H1BS
2
G 1/4 3/2 UNI 0 ... 12 PBMO*1) Ex II 2 GD, Exd IIC 3 T6 (-55 … +50°C), T4 (+90°C max) 2,0 7 Y013PE1H1BS
1/2 NPT 3/2 UNI 0 ... 12 PBMO*1) Ex II 2 GD, Exd IIC 7,8 T6 (-55 … +50°C), T4 (+90°C max) 2,5 8 Y013CA3H1BS
1 3
G 1/2 3/2 UNI 0 ... 12 PBMO*1) Ex II 2 GD, Exd IIC 7,8 T6 (-55 … +50°C), T4 (+90°C max) 2,5 8 Y013CE3H1BS
2 1/2 NPT 3/2 UNI 0 ... 12 PBMR*1) Ex II 2 GD, Exd IIC 3 T6 (-55 … +50°C), T4 (+90°C max) 2,8 8 Y013PA3H1BS
G 1/2 3/2 UNI 0 ... 12 PBMR*1) Ex II 2 GD, Exd IIC 3 T6 (-55 … +50°C), T4 (+90°C max) 2,8 8 Y013PE3H1BS
1 3
Manifold 3/2 UNI 0 ... 12 Without Ex II 2 GD, Exd IIC 3 T6 (-55 … +50°C), T4 (+90°C max) 2,8 9 Y013AKFH1BS
3 1 2
2 2 1/4 NPT NAMUR 3/2 UNI 0 ... 12 PBMR*1) Ex II 2 GD, Exd IIC 3 T6 (-55 … +50°C), T4 (+90°C max) 2.5 10 Y013PNAH1BS
G 1/4 NAMUR 3/2 UNI 0 ... 12 PBMR*1) Ex II 2 GD, Exd IIC 3 T6 (-55 … +50°C), T4 (+90°C max) 2.5 10 Y013PNEH1BS
1 3
4 2 1/4 NPT 5/2 UNI 0 ... 12 Without Ex II 2 GD, Exd IIC 7,8 T6 (-55 … +50°C), T4 (+90°C max) 2,8 11 Y015AA1H1BS
V-52-E-F
G 1/4 5/2 UNI 0 ... 12 Without Ex II 2 GD, Exd IIC 7,8 T6 (-55 … +50°C), T4 (+90°C max) 2,8 11 Y015AE1H1BS
513 NAMUR 5/2 UNI 0 ... 12 Without Ex II 2 GD, Exd IIC 7,8 T6 (-55 … +50°C), T4 (+90°C max) 2,3 14 Y015ANAH1BS
44 22 1/4 NPT 5/2 UNI 0 ... 12 PBMO*1) Ex II 2 GD, Exd IIC 7,8 T6 (-55 … +50°C), T4 (+90°C max) 2,3 12 Y015CA1H1BS
G 1/4
V-52-EH-F 5/2 UNI 0 ... 12 PBMO*1) Ex II 2 GD, Exd IIC 2 T6 (-55 … +50°C), T4 (+90°C max) 2,3 12 Y015CE1H1BS
551133
4 2 1/4 NPT 5/2 UNI 0 ... 12 PBMR*1) Ex II 2 GD, Exd IIC 2 T6 (-55 … +50°C), T4 (+90°C max) 2,5 13 Y015PA1H1BS
4 2
G 1/4
V-52-EH-F 5/2 UNI 0 ... 12 PBMR*1) Ex II 2 GD, Exd IIC 7,8 T6 (-55 … +50°C), T4 (+90°C max) 2,5 13 Y015PE1H1BS
513
513
*1) PBMR = Push button manual reset, PBMO = Push button manual override, JSMO = Jack screw manual override,
TMRP = Tamperproof manual reset button
Our policy is one of continued research and development. We therefore reserve the right to amend, without
en 5.7.540.02 notice, the specifications given in this document. (2012 - 5197d) © IMI Precision Engineering, Thompson Valves Ltd. 5/19
ICO3S - 2/2, 3/2 or 5/2 poppet valves
Electromagnetically actuated, direct solenoid operated
Our policy is one of continued research and development. We therefore reserve the right to amend, without
5/19 notice, the specifications given in this document. (2012 - 5197d) © IMI Precision Engineering, Thompson Valves Ltd. en 5.7.540.03
ICO3S - 2/2, 3/2 or 5/2 poppet valves
Electromagnetically actuated, direct solenoid operated
Dimensions Dimensions in mm
Projection/First angle
1 2
ø59 ø59
Y 47 Y 77
28
28
22
22
157
157
113,6
113,6
50,3
A 2
50,3
2
15,3 12
1
25,8
15,3 12
A
1
25,8
15,8
15,8
25,5 50
22
11
27
25,5 50
11
27
47
3 4
47 ø 58 47 ø58
1 1
28
28
2 2
22
22
157
187
3 3
2
39
1
27,5
2
26
6
16
66
42
11 25,5
42
1
15,5
18
18
27
6,5
50 44 26
65
Our policy is one of continued research and development. We therefore reserve the right to amend, without
en 5.7.540.04 notice, the specifications given in this document. (2012 - 5197d) © IMI Precision Engineering, Thompson Valves Ltd. 5/19
ICO3S - 2/2, 3/2 or 5/2 poppet valves
Electromagnetically actuated, direct solenoid operated
Dimensions in mm
Projection/First angle
5 6
47 ø 58 47 ø 58
1 1
28
28
2 2
22
22
157
157
3 3
2 2
39
39
1 1
27,5
27
26
26
15
16
6
6
16
24
11 25
15,5
11
11 5 25,5 27
27 50
50
7 8
47 ø 58 47 ø58
1 1
28
28
2 2
22
22
187
157
3 3
2
39
1 2
27
26
15
16
6
66
42
42
11 25 1
3
3
13 18
18
6,5
27
50
44 3 26
65
Our policy is one of continued research and development. We therefore reserve the right to amend, without
5/19 notice, the specifications given in this document. (2012 - 5197d) © IMI Precision Engineering, Thompson Valves Ltd. en 5.7.540.05
ICO3S - 2/2, 3/2 or 5/2 poppet valves
Electromagnetically actuated, direct solenoid operated
Dimensions in mm
9 Projection/First angle
47 ø58
28
2
22
157
6,5
3
2
39
1
26
25
16
ø5
ø8,8
51 38
51
10
47 ø 58
1
28
2
22
157
1
39
5,5
36
3
14
16
12
12
19,5 1,6 3 51
32 64
Our policy is one of continued research and development. We therefore reserve the right to amend, without
en 5.7.540.06 notice, the specifications given in this document. (2012 - 5197d) © IMI Precision Engineering, Thompson Valves Ltd. 5/19
ICO3S - 2/2, 3/2 or 5/2 poppet valves
Electromagnetically actuated, direct solenoid operated
Dimensions in mm
11 12 Projection/First angle
47 ø58 ø59 77
Y
1
28
2
22
177
177
5
149
4
1
35
59
12
W
71
2
43
58,5
36
3
20
34,5
12
50 30
11,5
12
25 51,2
11
27
13
47 ø58
1
28
2
22
177
5
4
1
59
2
43
36
3
20
11 12
50 4 30
Our policy is one of continued research and development. We therefore reserve the right to amend, without
5/19 notice, the specifications given in this document. (2012 - 5197d) © IMI Precision Engineering, Thompson Valves Ltd. en 5.7.540.07
ICO3S - 2/2, 3/2 or 5/2 poppet valves
Electromagnetically actuated, direct solenoid operated
Dimensions in mm
14 47 ø58
Projection/First angle
1
28
2
22
177
5
4
1
59
5,5
46
2
34
36
3
22
12
19,6 1,6 51
3
32
Warning
These products are intended for use in industrial compressed air The system designer is warned to consider the failure modes of all
systems only. Do not use these products where pressures and component parts used in fluid power systems and to provide adequate
temperatures can exceed those listed under safeguards to prevent personal injury or damage to equipment in the
»Technical features/data«. event of such failure.
Before using these products with fluids other than those specified, System designers must provide a warning to end users in the system
for non-industrial applications, life-support systems or other instructional manual if protection against a failure mode cannot be
applications not within published specifications, consult adequately provided.
IMI Precision Engineering, Thompson Valves Ltd. System designers and end users are cautioned to review specific
Through misuse, age, or malfunction, components used in fluid warnings found in instruction sheets packed and shipped with these
power systems can fail in various modes. products.
For further information please see Functional Safety Manual MI0560.
Our policy is one of continued research and development. We therefore reserve the right to amend, without
en 5.7.540.08 notice, the specifications given in this document. (2012 - 5197d) © IMI Precision Engineering, Thompson Valves Ltd. 5/19