Always use a caution Sign Never Mix Chemicals Ensure the sign can be seen and does present a tripping hazard Check Electrical cords for breaks and loose connections
Procedures Minimum Requirement
Remove as much furniture as possible Sweep the floor using a soft brush Fill the machine reservoir with detergent solution Using a sweeping motion ensure all areas The floor should be free of spots, scuffs or of the floor are covered. scratches Do not allow the machine to collide with walls and skirting as this will cause Inaccessible areas (skirting, corners, etc) damage. are free of dust lint and spots. Do not flood the floor with water. Half fill a bucket with hot water The floor is free of dust, litter, grit, water, Starting at the far side of the room and liquids etc. working towards the door or exit damp mop the floor after scrubbing Rinse the mop head frequently Any scuff marks should be removed with a scouring pad. Rub Lightly to prevent damage. Change the water and detergent on a frequent basis