Professional Documents
Culture Documents
M27C256B-10F1 Uv Eprom
M27C256B-10F1 Uv Eprom
Feature summary
■ 5V ± 10% supply voltage in Read operation
■ Access time: 45ns
28
■ Low power consumption:
– Active Current 30mA at 5MHz 1
PLCC32 (C)
Contents
1 Summary description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2 Device operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2.1 Read mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2.2 Standby mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2.3 Two-line output control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2.4 System considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2.5 Programming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2.6 PRESTO II programming algorithm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2.7 Program inhibit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2.8 Program Verify . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2.9 Electronic signature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2.10 Erasure operation (applies for UV EPROM) . . . . . . . . . . . . . . . . . . . . . . . 11
3 Maximum rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
4 DC and AC parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
5 Package mechanical . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
6 Part numbering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
7 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
2/24
M27C256B List of tables
List of tables
3/24
List of figures M27C256B
List of figures
4/24
M27C256B Summary description
1 Summary description
The M27C256B is a 256 Kbit EPROM offered in the two ranges UV (ultra violet erase) and
OTP (one time programmable). It is ideally suited for microprocessor systems and is
organized as 32,768 by 8 bits.
The FDIP28W (window ceramic frit-seal package) has a transparent lid which allows the
user to expose the chip to ultraviolet light to erase the bit pattern. A new pattern can then be
written to the device by following the programming procedure.
For applications where the content is programmed only one time and erasure is not
required, the M27C256B is offered in PDIP28 and PLCC32 packages.
In order to meet environmental requirements, ST offers the M27C256B in ECOPACK®
packages.
ECOPACK packages are Lead-free. The category of second Level Interconnect is marked
on the package and on the inner box label, in compliance with JEDEC Standard JESD97.
The maximum ratings related to soldering conditions are also marked on the inner box label.
ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com.
VCC VPP
15 8
A0-A14 Q0-Q7
E M27C256B
VSS
AI00755B
5/24
Summary description M27C256B
VPP 1 28 VCC
A12 2 27 A14
A7 3 26 A13
A6 4 25 A8
A5 5 24 A9
A4 6 23 A11
A3 7 22 G
M27C256B
A2 8 21 A10
A1 9 20 E
A0 10 19 Q7
Q0 11 18 Q6
Q1 12 17 Q5
Q2 13 16 Q4
VSS 14 15 Q3
AI00756
6/24
M27C256B Summary description
VCC
VPP
A12
A14
A13
DU
A7
1 32
A6 A8
A5 A9
A4 A11
A3 NC
A2 9 M27C256B 25 G
A1 A10
A0 E
NC Q7
Q0 Q6
17
Q1
Q2
VSS
DU
Q3
Q4
Q5
AI00757
7/24
Device operation M27C256B
2 Device operation
The operating modes of the M27C256B are listed in the Operating Modes. A single power
supply is required in the read mode. All inputs are TTL levels except for VPP and 12V on A9
for Electronic Signature.
8/24
M27C256B Device operation
2.5 Programming
When delivered (and after each erasure for UV EPROM), all bits of the M27C256B are in the
"1" state. Data is introduced by selectively programming "0"s into the desired bit locations.
Although only "0"s will be programmed, both "1"s and "0"s can be present in the data word.
The only way to change a '0' to a '1' is by die exposure to ultraviolet light (UV EPROM). The
M27C256B is in the programming mode when VPP input is at 12.75V, G is at VIH and E is
pulsed to VIL. The data to be programmed is applied to 8 bits in parallel to the data output
pins. The levels required for the address and data inputs are TTL. VCC is specified to be
6.25V ± 0.25 V.
9/24
Device operation M27C256B
n=0
E = 100µs Pulse
NO
++n NO
= 25 VERIFY ++ Addr
YES YES
Last NO
FAIL Addr
YES
AI00760B
10/24
M27C256B Device operation
Manufacturer’s
VIL 0 0 1 0 0 0 0 0 20h
Code
Device Code VIH 1 0 0 0 1 1 0 1 8Dh
11/24
Maximum rating M27C256B
3 Maximum rating
Stressing the device above the rating listed in the Absolute Maximum Ratings table may
cause permanent damage to the device. These are stress ratings only and operation of the
device at these or any other conditions above those indicated in the Operating sections of
this specification is not implied. Exposure to Absolute Maximum Rating conditions for
extended periods may affect device reliability. Refer also to the STMicroelectronics SURE
Program and other relevant quality documents.
12/24
M27C256B DC and AC parameters
4 DC and AC parameters
This section summarizes the operating and measurement conditions, and the DC and AC
characteristics of the device. The parameters in the DC and AC Characteristic tables that
follow are derived from tests performed under the Measurement Conditions summarized in
the relevant tables. Designers should check that the operating conditions in their circuit
match the measurement conditions when relying on the quoted parameters.
High Speed
3V
1.5V
0V
Standard
2.4V
2.0V
0.8V
0.4V
AI01822
13/24
DC and AC parameters M27C256B
1N914
3.3kΩ
DEVICE
UNDER OUT
TEST
CL
14/24
M27C256B DC and AC parameters
15/24
DC and AC parameters M27C256B
tAVQV tAXQX
tEHQZ
tGLQV
tELQV tGHQZ
Hi-Z
Q0-Q7
AI00758B
Table 9.
M27C256B
Test
Symbol Alt Parameter -45(3) -60 -70 -80 Unit
Condition
Min Max Min Max Min Max Min Max
16/24
M27C256B DC and AC parameters
Table 10.
M27C256B
Test
Symbol Alt Parameter -90 -10 -12 -15/-20/-25 Unit
Condition
Min Max Min Max Min Max Min Max
17/24
DC and AC parameters M27C256B
A0-A14 VALID
tAVEL
tQVEL tEHQX
VPP
VCC
tVCHEL tGHAX
tELEH tQXGL
PROGRAM VERIFY
AI00759
18/24
M27C256B Package mechanical
5 Package mechanical
Figure 9. FDIP28WB - 28 pin Ceramic Frit-seal DIP, with window, package outline
A2 A3 A
A1 L α
B1 B e C
eA
D2
eB
D
S
N
∅ E1 E
1
FDIPW-a
Table 12. FDIP28WB - 28 pin Ceramic Frit-seal DIP, with window (round 0.280"),
package mechanical data
millimeters inches
Symbol
Typ Min Max Typ Min Max
A 5.72 0.225
A1 0.51 1.40 0.020 0.055
A2 3.91 4.57 0.154 0.180
A3 3.89 4.50 0.153 0.177
B 0.41 0.56 0.016 0.022
B1 1.45 – – 0.057 – –
C 0.23 0.30 0.009 0.012
D 36.50 37.34 1.437 1.470
D2 33.02 – – 1.300 – –
E 15.24 – – 0.600 – –
E1 13.06 13.36 0.514 0.526
e 2.54 – – 0.100 – –
eA 14.99 – – 0.590 – –
eB 16.18 18.03 0.637 0.710
L 3.18 4.10 0.125 0.161
S 1.52 2.49 0.060 0.098
∅ 7.11 – – 0.280 – –
α 4° 11° 4° 11°
N 28 28
19/24
Package mechanical M27C256B
Figure 10. PDIP28 - 28 pin Plastic DIP, 600 mils width, package outline
A2 A
A1 L α
B1 B e1 C
eA
D2 eB
D
S
N
E1 E
1
PDIP
Table 13. PDIP28 - 28 pin Plastic DIP, 600 mils width, package mechanical data
millimeters inches
Symbol
Typ Min Max Typ Min Max
A 4.445 0.1750
A1 0.630 0.0248
A2 3.810 3.050 4.570 0.1500 0.1201 0.1799
B 0.450 0.0177
B1 1.270 0.0500
C 0.230 0.310 0.0091 0.0122
D 36.830 36.580 37.080 1.4500 1.4402 1.4598
D2 33.020 – – 1.3000 – –
E 15.240 0.6000
E1 13.720 12.700 14.480 0.5402 0.5000 0.5701
e1 2.540 – – 0.1000 – –
eA 15.000 14.800 15.200 0.5906 0.5827 0.5984
eB 15.200 16.680 0.5984 0.6567
L 3.300 0.1299
S 1.78 2.08 0.070 0.082
α 0° 10° 0° 10°
N 28 28
20/24
M27C256B Package mechanical
Figure 11. PLCC32 - 32 pin Rectangular Plastic Leaded Chip Carrier, package
outline
D A1
D1 A2
1 N
B1
E2
e
E3 E1 E F
B
0.51 (.020) E2
1.14 (.045)
D3 A
R CP
D2 D2
PLCC-A
Table 14. PLCC32 - 32 pin Rectangular Plastic Leaded Chip Carrier, package
mechanical data
millimeters inches
Symbol
Typ Min Max Typ Min Max
21/24
Part numbering M27C256B
6 Part numbering
Device Type
M27
Supply Voltage
C = 5V
Device Function
256B = 256 Kbit (32Kb x 8)
Speed
-45 (1)= 45 ns
-60 = 60 ns
-70 = 70 ns
-80 = 80 ns
-90 = 90 ns
-10 = 100 ns
-12 = 120 ns
-15 = 150 ns
-20 = 200 ns
-25 = 250 ns
VCC Tolerance
blank = ± 10%
X = ± 5%
Package
F = FDIP28W
B = PDIP28
C = PLCC32
Temperature Range
1 = 0 to 70 °C
3 = –40 to 125 °C
6 = –40 to 85 °C
Options
TR = Tape & Reel Packing
1. High Speed, see AC Characteristics section for further information.
For a list of available options (Speed, Package, etc) or for further information on any aspect
of this device, please contact the STMicroelectronics Sales Office nearest to you.
22/24
M27C256B Revision history
7 Revision history
23/24
M27C256B
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZE REPRESENTATIVE OF ST, ST PRODUCTS ARE NOT DESIGNED,
AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS,
NOR IN PRODUCTS OR SYSTEMS, WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR
SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
24/24