E-FLEX // EASY FLEXITANK
Designed for transportation of liquids in 2Oft containers
Advanced technology that replaces the bulkheads with integrated hamessing
Does not require bulkhead, prevents container damages with no sidewall pressure
Easy fitting in 3 minutes only, Easy Flexitank
Container Owners Association and Association of American Railroads test certifications
LiquATechnical Information
Volume:
12,000 to 26,000 litres
Bottom valve,
Camlock 2” or 3””
Temperature tolerance:
-50°C up to + 70°C
Multilayer design
Container Owners Association
Rail Impact Test 2.38G
19% higher safety result
than the industry standard
Food approved raw
materials
Cleanroom production
Optional:
Air release system
EVOH ~ oxygen Barrier
Aluminum Aseptic Barrier
Gamma Sterilization
Not applicable for hazardous
cargos
www. liquatrans.com
Features & Advantages
The first and Only flexitank;
Does Not require bulkhead
Does Not require special
fitting equipment
Does Not exert pressure to
the side walls of the container
Patented, harnessed,
wave breaking design
Patented bonnet
protection around the valve
as a secondary security and
hygiene
Dual Flexitank
Possibility to load two
different products with two
seperate compartments in a
single flexitank
Fitting by two people in three
minutes only
Removes the pressure on
the side walls of the container.
Relaxed selection criteria,
expanding the range of usable
containers
Low Residue
Environmental Friendly
Elimination of bulkhead to
reduce the carbon emission
Carbon Foot Print
40% less than conventional
flexitanks
No need for wood, steel,
polystyrene or other plastics
used as a bulkhead system
Easy recycling
e €