- Just disconnect both ends of cable so removing leverage. - The cable should move easily, like with 2 fingers push pull with zero drag. - If not, the cable is seized in outer sheath. - Try cleaning with carb or brakedisc cleaner sprayed into cable as its worked. - If not better, replace it with a new cable. - The levers are just pivot points really. - Or cable is badly routed. - The clutch springs, when changed for heavy duty, make it worse. - The longer clutch actuator arm just gives greater leverage. - Think of long and short length of wood one gives hard lift other easy. - If you want to make the clutch easier anyway, please go to the file section for „Easy Clutch“