STEEL PLATES
pao
= pr. Gunawan ane Pe ee
olT. Gunawan Dianjaya Stee! Tbk. (GDS) is a private joint
stock company established in 1989 and listed in the
Indonesia Stock Exchange on December 23, 2009.
GDS is situated in Surabaye City of East Jave province in
Indonesia.
GDS is one of the leading producers of hot rolled carbon steel plates in Indonesia with
an installed capacity of 350,000MT of plates per year.
GDS steel plates cre continuously being supplied to the domestic market and also
being exported to Asia, Middle East, Europe, Australia, Canada, etc.
Continual development in product facilities, human resources, technology and
customers satisfaction is the ultimate mission of GDS to assure a sustainable growth of
our businessCCC Ca
Ny 1
LL] Quality Monagement System by Lloyd's Register Quality Assurance Lid., U.K.
- ISO 9001: 2008, EN ISO 9001: 2008 & BS EN ISO 9001: 2008
[2] Stondar Nesional Indonesio
{3} TUV Certificote by TUV NORD Cerification Body for Material Manufocturer acc.
to Pressure Equipment Directive 97/23/EC and AD 2000-Merkblat WO.
EC Cerificate of Quality System Approval by Lloyd's Register Verification Lid.,U.K.
- EN 10025-2:2004 Hot Rolled Structural Stee! Plate in thickness of
max. 70mm, Grades S235UR, JO, 12, S275UR, JO, J2. & S355JR, JO, J2, K2.
rE ‘Approved by Register of Shipping :
a
@
e € @ €
@
‘American Bureau of Shipping, U.S.A (ABS)
Biro Klosifikasi Indonesia (BKI)
Bureau Veritas, France (BV)
Det Norske Veritas, Norway (DNV)
Germanischer Lloyd, Germany (Gl)
Korean Register of Shipping, Korea (KR)
Lloyd's Register of Shipping, U.K (LR)
Nippon Kaiji Kyokai, Japan (NK)
RINA S.p.A,, Regisiro ltaliano Navale Group, Italy (RINA)
L8) Approval of National Standards
a
@
Factory Production Control (FPC) Certificate, Singapore
SIRIM QAS International Sdn, Bhd.,Molaysia.Uae TST)
Lh ees
Slab Cutting Inspection
P28000006
Descaler Reheating Furnace
— RJeloXeloYoy
KeTeTeTole)
4-High Roughing Hot Leveller
& Finishing Mill
iZ.- —= oS
Cooling Bed
Inspection Dividing Shear
e-@— =
ame Guiting Mechanical Test Sampling ——
ses —_—
i) nite
215mm ‘Shipment
B-@
Side Shear Inspection StorageAvailable Product
GDS steel plates ore produced to the specifications and sizes listed below, but other
specifications are subject to negotiation
1. Steel Plates for General Use.
1-1 Ordinary Structural Stee! Plates
Specification Designation Ranges of Avoilable Sizes
Grede =
Thickness Width Length Merah
(mm) (mm) (mm) iM cTon)
AS83678 250
ASTM A36. A36 6-80
ASIMA263__| A283, 8 C&D
ASTM A 573 A573 - 58 8-40
ASTM A709__|_A709- 36
EN 1002527 | $235 R&IO 6-80 | 1219-2500 | 2,498 -12,192 74
2004 $275 IR&JO
$235 12
5275 12 ate
TS 63101 $5930 & 55400 an
JIS G3106 SMA0DA, B & C :
1-2. High Strength Low Alloy Siructural Steel Plates.
Specication Designation Ranges of Available Stes
Grade:
Thickness Width Length Nee
(mm) (mm) (mm) NATon)
AS 3678 350 8-80
ASTM AS72 A572 - 42, 50& 55 .
ASTM A573 A573 - 65870 8-40
ASTM A 709- A709 - 50
CSA G40.21 300W or 44W 8-80 1,219 — 2,500 | 2,438 - 12,192 74
EN 10025-2: | $355JR, JO,
2004 $355)2 & KD 12-80
JIS G3T01 35490
IS G3106 ‘SM490A, B&G a-ao | S5eFonh
SM490 YA & YB - 1,219-2,000)
$M520 B &C
2. Steel Plates for Boilers and Pressure Vessels Use.
Specification Designation Ranges of Available Sizes
Grade 3
Thickness | Width length | Mex. Nett
(rm) (rom) {rnm) ator)
ASTM A285 | A2854, B&C 6-80
ASTM AS16, AS16-55 & 60 nose 1,219—2,500 | 2,438 - 12,192 74
ASTMASI6 | _A516-65 870 -3. Shipbuilding Steel Plates ( Approval of GDS Steel Plates }
3-1 Hull Structural Steel Plates (Mild Steels).
ABS ABED
BKi KA BBD ae
av A o40
BED 8-25
DNV, WA, WWEBNVD | 6-50
GL A 6-40
BaD 6-25 | 1219-2500 | 2,438-12,192| 74
R RA, RB&RD 6-40
A 6-0
a B&D 6.25
NK KA, KB&KD
RINA’ AB&D cae
3-2 High Strength Hull Structural Steel Plates (High Tensile Steels).
ABS ‘AH32, DH32, eo
AH36 & DH36 .
WV ‘AHS2, DH32
AH36 & DH36 aa
DNV NVA32, NVD32 =
NVA36 & NVD36 aes
a 32, 32,
paz Daz 1,219 2,500 | 2,438- 12,192] 7.4
Re ‘AH92, DH32,
AH36 & DH36
rr ‘AH32, DH32,
AAH36 & DH36 540
NK KAB2, KD32,
KA36 & KDI6
RINA ‘AH32, DH32,
AH36 & DH364, Approval of National Standards
Notional Standards Specification & Grades ee
Factory Production Control (FPC) | ASTM A36, A572
Cerificate, Singapore AS/NZS 3678 Grades 250 L15, 300 L15 &
350.115
BS EN 10025-2 : 2004 Grades $235, 6-100
5275 & $355
GB/T 70081591 Grades G235, Q275, Q295 & G345,
JIS G3106 Grades 490 A, B, C, YA& YB
SIRIM QAS International Sdn. Bhd., | ASTM AS6 & A283 B & C S166)
Malaysia ASTM A S73 - 58, 65.8 70 8-40
EN 10025.2 : 2004 Grades $235 JR, JO, J2 & Bei
$275 JR, JO, 12
EN 10025 - 2 : 2004 Grade 355 JR, JO, 12, K2 8-75
JIS G 3101 Grade $$ 400 8-100
5. GDS steel plates conform to th
shapes and dimensions, but of!
her specifications are subject to negotiation
tolerance requirements of the following specifications for
Specification Title
ASTM AG, Permissible Variations in Dimensions ond Weight.
ASTM A20
EN 10029 Tolerances on Dimensions, Shapes and Mass Hot Rolled Steel
Plates 3mm Thick or Above.
JIS G3193, Dimensions, Weight and Permissible Variations of Ho! Rolled Plates,
Sheets and Sirip.
Ship Register In eccordance with the rules of eoch Ship Register.
‘ABS, BV, ONY, GL, KR, LR, NK,
RINA & BK7
Quality:
GDS steel plates are free of injurious defects and have a workmanlike finish to conform to the
requirements of specification under which it is produced
Types of Edges:
GDS steel plates can be furnished with “Mill Edged” as rolling natural edges (untrimmed edges)
and “Cut Edged” (trimmed edges), depending upon the customer's requirement
Delivery Weight:
The Weight of GDS steel plates as delivered is the calculated volues in W/ton, basic weight : 7.85
Kg/mm/m?. The method of weight calculation of the steel plate shall conform to Specification JIS
G3193.
Minimum Acceptable Quantity :
«a. For Domestic market : 20M/Ton or 5 pieces persize.
b. For Export market : 5OM/Ton or 10 pieces persize.
Delivery Allowance:
10% on the total weight and /or per size, and plus minimum one piece per size, if the quantity
ordered is ess thon 10 pieces persize.
Normal Delivery Tim
The normal delivery time is between 30 ond 45 days after receipt of firm order and payment, but
early delivery can be arranged on case to cose basis.
Ultrasonic Testing :
As the standard practice, ultrasonic testing is done by GDS on most of steel plates at random
basis. However , If requested by the customer, GDS steel plates con be submitted to 100%
ultrasonic testing with thicknesses greater than 25mm up to and including 70mm in accordance
with the Standard Specification ASTM A435. Ultrasonic testing charges to be borne by the
customer,
Mill Test Certificate:
The Mill Test Certificate issued by GDS to the customer shall consist of specification, grade, heat
numberplate number, quantity, dimensions, weight, tes! number, chemical composition and
mechanical properties like yield strength, tensile strength, elongation, etc.
For GDS steel plate above 70mm in thickness, itsholl be supplied in the “as rolled” condition with
1n0 guarantee for any flainess and internal imperfections such os pipe, ruptures, laminations and
inclusion etc. Only the ladle analysis and mechanical properies will have compliance to the
requirement of the specification under which the plate is ordered9. Packing:
Bare and Loose.
10. Marking:
Unless otherwise requested by the customer, GDS steel plates are sienciled with white spray paint
onthe top surface of every plate as follows
PT. GUNAWAN DIANJAYA STEEL Tbk.
SPECIFICATION & GRADE
DIMENSIONS
HEAT NO:
PLATENO :
MADE IN INDONESIA
For GDS shipbuilding sieel plates, in addition to the above marking, Sociely’s
Seal Number are hard stampedcoo | 2300 | 1400 | 3500 | 288 | save
650 | 2500] 116 | arv2 | 2az0 | ano
yoo | 2760 | 133 | «as | 2553 | 5,108
750 | 2960 | 1.750 | sars | 2295 | sazo
bcd =22 of Steel Plates
| Standard Weight
6.568
Notes:
Basic Weight 7.85 Kg/mm/m’
Foot(12inch) 304.80 mm.
Inch :25.40 mm.
underJISG3193.
7,400 Kas
Orders for GDS Stee! Plates beyond the range shown in the table above are subject to negotiation.
= Out of GDS product mix ranges.
1
2.
3
4. Max. Weight of one GDS Steel Plate
5.
6.
b)PT. GUNAWAN DIANJAYA STEEL Tbk.
D
LN ela 7 Qi eal Ue ae
RC ee ce oe Oc RSC Eee
Cee M oe
ary ACR C us)
cs ACCS)
E mail Fe eo UCR
Peed rere ccs Rec
ee ees
ea + #62 (031) 7490598 Ext. 216, 212, 222
cg Bord Re eral)
rT Fr onl TCU RE
PEW Orca]
Peo a
Phone FAG eee)
Fax ACE Re cd
E mail Beh CRC Rac
(04/2016)
rr