VE.Direct non inverting remote on-off cable (ASS030550310)
This cable is intended for on/off control of BlueSolar MPPT solar chargers with a VE.Direct interface. It will switch the product on when the source signal turns high, and switch the product off when the source signal turns low or becomes free floating. Note regarding the MPPT 75/10, 75/15 and 100/15: the VE.Direct RX pin of these models must be set to remote on/off instead of the default battery life enable/disable setting. Use VictronConnect to change this setting.
Specifications: Maximum input voltage: 70V Minimum input voltage needed for switch on: approximately 6V Switch off level: input voltage must be less than 1V or must be free floating