Professional Documents
Culture Documents
com
Why Choose Sensaphone
Sensaphone products are designed to help you watch over a remote facility. Our range of Sensaphone solutions can
instantly inform you when conditions are less than perfect, plus you can check on the status at anytime. Sensaphone is
the leader in Remote Monitoring with over 25 years in business and over 350,000 installed systems worldwide.
Our vast experience has helped us design products that are reliable, easy to use, flexible, and affordable. Listed below
are just some of the reasons that Sensaphone is the best choice for your remote monitoring application.
Table of Contents
WEB600. . . . . . . . . . . . . . . 4 IMS-1000. . . . . . . . . . . . . . 10
400 & 800 . . . . . . . . . . . . . 6 IMS-4000. . . . . . . . . . . . . . 12
WSG30. . . . . . . . . . . . . . . 8
2 WWW.SENSAPHONE.COM
Computer Room Monitoring Considerations
Whether you have a small equipment closet or a large data center, the environment that surrounds your servers is
critical. Unexpected changes in the environment can cause problems with efficiency, performance, and even complete
failure. Here are some typical considerations for monitoring the critical conditions in your room.
Room Humidity:
Humidity is often overlooked, but can be almost
as important as the temperature in any size room.
Excessively low humidity can be the cause of constant
static electricity discharges that wear and potentially
damage your equipment. High humidity is just as
bad, and can be the cause of condensation on internal
electronics leading to corrosion and premature failure.
Don’t forget to add a humidity sensor to watch for these
potential situations.
network
ethernet
Web Programming
Hard-wired Connection
Text Message
Temperature Sensor
SNMP Trap
Water Detection Sensor
SNMP
Humidity Sensor
Manageable
4 WWW.SENSAPHONE.COM
Specifications Suggested Sensors
I nput S ensing : A larm N otification : The Web600 uses very inexpensive
hard-wired sensors. Each input can
• Up to 6 Hard Wired Sensors. • Up to 8 User Profiles with 4 alarm
accept a contact closure, and analog
• Sensor Types Accepted: contact methods for each.
Thermistor temperature sensor,
2.8k resistive Thermistor • Each notification can be or an analog 4-20mA transducer.
delivered by: Below is a list of the most common
10k resistive Thermistor
• E-mail sensors for a small computer room.
Normally Open Contact
• Text message B asic T emperature S ensor
Normally Closed Contact
• SNMP trap Small and convenient to mount just
4-20mA Current Loop Transducer about anywhere. Place inside of a
• Alarms can be assigned to cabinet or on a wall to measure a wide
• Analog readings are performed in specific user profiles to direct range of temperatures.
12-bit resolution. responsibility.
• Built-in power failure monitoring • Up to 8 alarm escalation levels. FGD-0102 . . . . . . . . . . . . . . . . 10K Temperature Sensor
when used with optional battery
backup. • Programmable user scheduling. D ecorator T emperature
S ensor
• Programmable sensor time D ata L ogging : Used to monitor the average
scheduling. • Up to 32,000 samples of time temperature of a room and still
look stylish on the wall.
stamped data stored internally.
S upported P rotocols : FGD-0103 . . . . . . . . . . . . . . . . . 10K Room Temp Sensor
• Web page - HTTP, PDA, WAP, and • Programmable sampling rate per
XML. input sensor. A nalog H umidity
• 1 second to 1 month sampling rate T ransmitter
• SNMP - MIB with Traps, GET, Reads actual analog humidity
GETNEXT, and SET. range. value to monitor high and low
thresholds.
• MODBUS/TCP Slave P ower R equirements :
• 110 or 220 VAC power.
C ommunications : FGD-0052 . . . . . . . . . . . . . . . . . Analog Humidity Sensor
phone line
Custom voice
phone calls
Humidity Sensor
6 WWW.SENSAPHONE.COM
Specifications Suggested Sensors
I nput S ensing : O utput : The Sensaphone 400 and 800 use
very inexpensive hard-wired sensors.
• Up to 4 hard wired sensors • Single alarm relay output for
Each input can accept a contact
(Model 400) optional local alarm indication.
closure, or an analog Thermistor
• Up to 8 hard wired sensors • Manual or automatic alarm temperature sensor. Below is a list
(Model 800) response switching. of the most common sensors for a
small computer room.
process. 6 size C alkaline batteries (not greater coverage. Operates on two AA batteries.
network
ethernet
Web
Programming
Text Message
SNMP Trap
RJ45/Network Connection
SNMP Manageble
Wireless Connection
Temperature Sensor
Modbus
Humidity Sensor
8 WWW.SENSAPHONE.COM
Specifications WSG Sensors
The WSG30 uses its own set of wireless sensors.
I nput S ensing : S upported P rotocols : UP to 30 sensors can be used per WSG30 device,
• Up to 30 Wireless Sensors. • Web page - HTTP, PDA, WAP, and with any combination of sensor types.
• Up to 8 User Profiles with 4 alarm • 1 second to 100 hour sampling rate FGD-WSG30-HUM . . . . . WSG Wireless Humidity Sensor
• SNMP trap • Built-in rechargeable battery FGD-WSG30-PWR. . . WSG Wireless Power Failure Sensor
WSG W ireless D ry
C ontact S ensor
The WSG Wireless Dry Contact sensor
includes a built-in radio transmitter and
input terminals for connecting to any normally-open
or normally closed output.
Description Part Number
FGD-WSG30-DRY . . . . WSG Wireless Dry Contact Sensor
WSG30 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FGD-WSG30
WWW.SENSAPHONE.COM 9
• Redundancy and Supervision
network
phon
e lin
e
Custom voice
ethernet
phone calls
Web
Programming
Hard–wired Connection
E-Mail
Airflow Sensor
SNMP
Managebale
Humidity Sensor
10 WWW.SENSAPHONE.COM
Specifications IMS Suggested Sensors
Each IMS sensor connects to the host via a
I nput S ensing : S upported P rotocols :
RJ45 Jack. Because the sensors use existing
• Up to 8 sensors. • Web page - HTTP, PDA, WAP, and wiring system, no special wiring is required.
• Uses smart, supervised IMS series XML. Simply locate where you want to place a
sensor, attach a standard patch panel and do
sensors with Cat-5 connections. • SNMP - MIB with Traps, GET, the same in your server room to connect.
• Automatic sensor identification GETNEXT, and SET.
and setup. R oom T emperature S ensor
C ommunications : This temperature sensor is designed to
• Built-in power failure monitoring. • Ethernet 10/100Base-T monitor ambient air temperatures. User
configurable to either °C or °F.
• RJ-11 Telephone interface
(IMS-1002) IMS-4810. . . . . . . . . . . . . . . . . Room Temperature Sensor
IP M onitoring :
• Up to 16 network devices or IMS M ini T emperature
servers can be monitored. S ensor
D ata L ogging : The mini temperature sensor is ideal for monitoring
• Specific TCP port services can be • Up to 100,000 samples of time temperatures inside small cabinets or tight spaces.
monitored for connectivity and stamped data stored internally. IMS-4812. . . . . . . . . . . . . . . . . Mini Temperature Sensor
response.
• Programmable sampling rate IMS R oom H umidity
• Lack of response generates an per input sensor from 1 sec to 1 S ensor
alarm notification. month. The humidity sensor is used to monitor
relative humidity in the computer room.
• Alarm events and notification
details are also logged creating an IMS-4820. . . . . . . . . . . . . . . IMS Room Humidity Sensor
A larm N otification :
audit trail.
• Up to 16 User Profiles with 4 alarm IMS W ater
contact methods for each. D etection S ensor
The Water Detection Sensor
• Each notification can be IP C amera S upport : protects servers and equipment
delivered by: • Up to 16 IP cameras from third from damaging water leaks from malfunctioning
HVAC systems, cafeteria accidents or general plumbing
• E-mail parties can be integrated. failures in the facilities.
• Text message • Alarms can trigger automatic IMS-4830. . . . . . . . . . . . . . . IMS Water Detection Sensor
IMS-1000 Single Room Monitoring Solution. . . . . . . . . . . . . . . . . IMS-1001 IMS-4863. . . . . . . . . . . . . . . . . . . . . IMS Airflow Sensor
network
Custom voice
phone calls
ph
on
el
in e
E-Mail
Text Message
SNMP Trap
SNMP
Managebale
“Atlanta Data Center, a high
temperature alarm
exists, it is now 94°F”
Functional Diagram
Up to 8 IMS IMS-4000 Host (Optional Expansion)
CAT-5 Sensors IMS-4000 Wireless Node
Ethernet PC Running IMS ConsoleView up to 31
E–Mail Alarms Enterprise Console
Up to 8 IMS
Switch 8 outlets Wireless Sensors (Per Node)
SNMP Traps
Voice Phone Calls (Optional Expansion)
SNMP Management IMS-4000 Nodes
Voice Call In Status up to 31
Dual Relay
IMS-4000 PowerGate (Optional)
Output Module Up to 8 IMS Dual Relay
Switch 8 outlets
CAT-5 Sensors (Per Node) Output Module
12 WWW.SENSAPHONE.COM
IMS-4000 - The Expandable Enterprise Solution
For larger monitoring requirements about additional licensing costs. a standard feature on the 4000. It
with multiple locations, the Multiple users will have an enterprise can also provide alarm messages
IMS-4000 Enterprise Solution can view from any location. to fax machines and pagers. More
expand and grow with your needs. In addition to the enterprise level notification flexibility comes with
The IMS-4000 Host performs all of monitoring that the IMS-4000 the addition of time scheduling for
the same monitoring functions as system provides, it also includes users, and even alarm grouping
the IMS-1000, but with the ability an assortment of advance features for different groups of users. The
to monitor multiple locations not found in the IMS-1000. All IMS-4000 will make sure that only
within a facility, or even multiple environmental and IP alarms can the appropriate users will be notified
locations across the globe. The key be scheduled so that they are only for each alarm condition.
to this distributed monitoring is Controlling outlets is another
the addition of IMS-4000 Nodes. feature that the 4000 series products
Each Node can also monitor up
to 8 external IMS sensors, but it
The IMS-4000 can perform. Using the optional
PowerGate products, outlets can be
reports back to a Host through the
network. Up to 31 IMS Nodes can
Enterprise switched on or off by the network
of Hosts and Nodes. Outlets can
report back to a single IMS Host. The
IMS-4000 Console View software Solution can be controlled either manually, or
even automatically in response to
package is included with each Host
providing an enterprise view of expand and grow specific alarm conditions. You can
even automatically reboot network
up to 32 locations per Host. If you
have more than 32 locations, no with your needs equipment when it stops responding.
Up to 128 network cameras can be
problem, multiple Host networks
can be managed within the same integrated into the IMS-4000 system.
monitored for alarms during certain Multiple images can be viewed from
Console View software package. A hours, or certain days of the week
multi-site/multi-user software license the Console View software, and
if required. The alarm notification snapshots can be sent attached to
is included with the purchase of the is more powerful with the phone
Host, so you don’t need to worry e-mails when alarms occur.
modem and custom voice messages
14 WWW.SENSAPHONE.COM
IMS Hard Wired Sensors IMS Wireless Sensors
R oom T emperature S ensor IMS C urrent S ensor W ireless T emperature
This temperature sensor is designed to
monitor ambient air temperatures. User
Monitors current consumption S ensor
of a particular device or circuit
configurable to either °C or °F. Provides remote temperature sensing
anywhere in an infrastructure. It reports actual current
without running wires. Can be configured
flow in the circuit, allowing users to know the current
to monitor ambient air temperature or
IMS-4810. . . . . . . . . . . . . . . . . Room Temperature Sensor draw from devices such as server racks, UPS and
monitor temperature readings from an external probe.
generators.
IMS-4811. . . . . Room Temperature Sensor With Display(°F) IMS Wireless Temperature Sensor . . . . . . . . . . . IMS-4210
IMS-4841. . . . . . . . . . . . . . . . . . 15 AMP Current Sensor
IMS-4813. . . . . Room Temperature Sensor With Display(°C) IMS Wireless Temperature Sensor
IMS-4842. . . . . . . . . . . . . . . . . . 20 AMP Current Sensor with external Probe. . . . . . . . . . . . . . . . . . . . IMS-4210-E
WWW.SENSAPHONE.COM 15
Product Comparison
400/800 WSG-30 WEB600 IMS-1000 IMS-4000
Outputs 1 0 0 1 Optional
Input Type
IMS Sensors
I/0 Expansion
Remote Programming
Alarm Delivery
Optional
Voice Phone Call
Optional
Numeric Pager
Optional
Alpha Pager
Fax Optional
SNMP Trap
Web Status
Datalogging
Ethernet w/Optional
Communication Phone Line Ethernet Ethernet Ethernet plus Phone Line
Phone Line
Monthly Fee No No No No No