Professional Documents
Culture Documents
AY Ref: 10300181
y
Summary
op
Last/Family Name: Muhammad Ishaq
Second Name:
Third Name:
Citizenship: Pakistan tC
an
Degree Type: MS
Program:
ic
Confirmed Advisor:
Ap
Abdullah Muhammad Ishaq
MS Energy Resources and Petroleum Engineering
Energy Resources and Petroleum Engineering
Applicant Name
Second Name:
Third Name:
y
Additional Information
op
Date of Birth: 23/01/1998 Gender: Male
Citizenship: Pakistan
National ID Number:
tC
(If Saudi Citizen)
Faculty Interest
pl
Have you discussed your application with a member of the KAUST faculty? N
Previous Application
Year Applied:
Program Applied To:
Sponsor
Contact Information
Address: House No. 939-1, Ayesha lodge, H type colony, civil lines, jhang
y
op
Country: Pakistan
State/Province:
City: Jhang
tC
Zip/Post Code: 35200
Degree Type: BS
Major: Petroleum Engineering
pl
State:
City: Lahore
Date Attended From: 08/2017 To 06/2021
Cumulative GPA:
Actual/Expected Graduation Date: 06/2021
Degree Type:
Major:
College/University:
Country:
State:
City:
Date Attended From: To
Cumulative GPA:
Actual/Expected Graduation Date:
Is English Primary language of Instruction?
Abdullah Muhammad Ishaq
MS Energy Resources and Petroleum Engineering
Energy Resources and Petroleum Engineering
Degree Type:
Major:
College/University:
Country:
State:
y
City:
op
Date Attended From: To
Cumulative GPA:
Actual/Expected Graduation Date:
tC
Is English Primary language of Instruction?
Standardized Tests
GRE
an
GRE Exam been taken? N
Test Date:
GRE exam planned for the future: Y
ic
GRE Results %
Verbal Score Verbal Percentile
pl
%
Quantitative Score Quantitative Percentile
Ap
%
Analytical Writing Score Analytical Writing Percentile
iBT TOEFL
Test Date:
Results
Listening Reading Writing Speaking Total
IELTS
Test Date:
Results
Listening Reading Speaking Writing Total
Abdullah Muhammad Ishaq
MS Energy Resources and Petroleum Engineering
Energy Resources and Petroleum Engineering
y
Collection: Status:
op
Name of Document:
Document Type:
tC Date:
an
Collection: Status:
Name of Document:
Email: m.kashifali@uet.edu.pk
Ap
Email: azamkhan@uet.edu.pk
Title: Assistan Professor Employer: University of Engineering and Technology, Lahore
Relationship to Applicant: Teacher
Address:
Lahore 54890 Pakistan
Email: rizwan.latif@uet.edu.pk
0
'°'°'° l>A
A (.I)~
V1
-
N
l>
II1
0
pp n :;
,,
- C: 2~ ,, i~ ,:,
l> r- , __,_
r- -~ •
l>
A "
00 :::c ~ ,
!o, W !!. :I: W !l, )>
'°
0 A o,
A ~I Ministry of Interior,
(f) fl-
• -... )>-<
:s:f. )>
:s: f,0 z~ IQ -~-....,.,,S
N
- A : -< -< ,
Vil A :-w-. N
rr..-=. N 3: .,_. )> " Government of Pakistan
Vil I\ I ,~ , requires and requests ~~j,
3 A
N A ~ w w )> Q !!! ' ;;g; i in the name of [it·:
3: ,_.g '
Vil I\ 3: z . The President ¥;~}.(l
~ , -~
0 I\
V1 A Islamic Republic of Palcistan
I\ ~t )> '
C ti . J.X all those to whom it m ay concern
N
- A
Vil A l'~ ,.,_~ to allow the bearer
Vil A
to pass freely without let or hindrance
- -
Vil A
N A N[· )>
~ ~~ w~ and to afford the bearer such assistance
A 0
0 IL ,__. .i! A ,. ~I and protection as m ay be necessary
N A o,__. ~- i o-
~Io
N~ $~
I\ (.,J :t J,f \Of
0
,__. Director General
A 00 )>
(.,J z (.,J V1
Vil
°''° A • (.,J "'
I-'
N I Immigration and Passports.
A u, 0
w ..... l
0 A u,
I
A ] _ _.,_ ._ __
..
ni \0 C0806787
V1 I\ 0 1'
00 ~
--
I\
I\
'° A - ~i
-..J
0 A 00
,,
N A
t
an
IQAMA ID l'IOM
IUPt1'"scan ~ t ♦f !Ot ~ Abdullah Muhammad Ishaq
10300181
ic
pl j 1a:n l Jeeae
.
.u, \,,
Ap
•
v• ► •• , ~ , r A ,- A v , v , ,._j_J •
I '(' .• ~ .JJ
' ~ ~ 1\ / • \ ~ ' t 'f" A/ • ~/ ~ ~ JI • ea~
•
- ••• Vf
• sea - ~~•toms t t:t-.. GJ-Mf• ' ~~
t
10300181
I CTOflWt or FMSPOfti 0EP1
an
RESIDENl IDENTITY .:,ljl,'!"1 \J #wa\al l ~~.All
ic
pl
Ap
P s lt
1
Transcript Academic Record mlnibersitp of Qfngtneertng anb 'm:ecbnologp,Muhammad
Abdullah JlaboreIshaq
SenaJ 10300181
NoD2 !03266
ACADEMIC TRANSCRIPT
I~ !
Registration No:
Student Name:
Father Name:
2017-PET-3
Abdullah
Muhammad lshaq
Session:
Program:
2017
B.Sc Petroleum & Gas Engineering
~
Campus: Lahore
CNIC/Passport: 3320296310159
1111111111111111111111111111111111
DOB: 23 January, 1998 Mode of Study: Regular Page 1 ofl
Course Couno
Code ' ·, Course Title •
~
CH Grade GPs Code Course Title
Fall 2017 Fall 2020
EE-199 Basic Electrical and Electronics Engineering 3.0 A· I I.I Ch.E-451 Environment and Safety 3.0 A 12.0
EE-199L Basic Electrical and Electronics Engineering 1.0 A- 3.7 Ch.E-451L Environment and Safety 1.0 A+ 4.0
HU-I0IL Communication Skills
y
1.0 A- 3.7 Pct-E-424 Well Testing 2.0 A 8.0
MA-113 Calculus and Analytic Geometry 3.0 B 9.0 Pct-E-424L Well Testing 1.0 A 4.0
ME-120 Engineering Drawing and Graphics 1.0 A- 3.7 Pct-E-425 Petroleum Production Engineering - II 3.0 A- I I.I
op
M E-120L Engineering Drawing and Graphics 1.0 A- 3.7 Pct-E-425L Petroleum Production Engineering - II 1.0 A 4.0
MinE-110 Applied Geology 3.0 B 9.0 Pct-E-426 Principles of Reservoir Simulation 3.0 A 12.0
MinE-II0L Applied Geology 1.0 A+ 4.0 Pct-E-426L Principles of Reservoir Simulation 1.0 B+ 3.3
Pct-E- 101 Fundamentals of Petroleum Engineering 3.0 A+ 12.0 Pet-E-49 I Project (Phase - I) 3.0 A 12.0
SemcsterCH: 17.0 CumCH: 17.0 GPA: 3.524 CGPA: 3.524 Status: Promoted ScmcsterCH: 18.0 CumCH: 121.0 GPA: 3.911 CGPA: 3.561 Status: Promoted
Sprin&2018 tC Sprin&2021
CS-IOI Computing Fundamentals 2.0 B+ 6.6 Pet-E-427 Reservoir Management 3.0 A- II.I
CS-I0IL Computing Fundamentals 1.0 A 4 .0 Pet-E-427L Reservoir Management 1.0 A- 3.7
CY-171 Petroleum Chemistry 2.0 A 8.0 Pet-E-428 Gas Reservoir Engineering 3.0 B 9 .0
CY-171L Petroleum Chemistry 1.0 A 4.0 Pet-E-42RL Gas Rese rvoir Engineering 1.0 A- 3.7
IS-101 Islamic & Pakistan Studies-I 3.0 A 12.0 Pet-E-429 Principles of Enhanced Oil Recovery 3.0 A 12.0
MA-129 Vector and Complex Analysis 3.0 A 12.0 Pet-E-429L Principles of Enhanced Oil Recovery 1.0 A- 3.7
an
ME-I00L Workshop Practice 1.0 A- 3.7 Pet-E-492 Project (Phase • II) 3.0 A 12.0
PHY-115 Applied Physics 2.0 B+ 6.6 ScmcsterCH: 15.0 CumCH: 136.0 GPA: 3.680 CGPA: 3.574 Status: Promoted
PHY-11 SL Applied Physics 1.0 B 3.0
Semester CH: 16.0 Cum CH: 33.0 GPA: 3.744 CGPA: 3.630 Status: Promoted
Fall 2018
ic
Semester CH: 16.0 CumCH: 49.0 GPA: 3.431 CGPA: 3.565 Status: Promoted University of E:wineering
Sprin& 2019 and T€ch1t,.;106;, Lahore
C E-240 Fluid Mechanics 3.0 B+ 9.9
CE-240L Fluid Mechanics 1.0 B+ 3 .3
Ch.E-251 Appl ied Thennodynamics 3.0 8- 8. 1
Ch.E-251L Applied Thennodynamies 1.0 B 3.0
HU-221 Technical Writing & Presentation Skills 3.0 B+ 9.9
MA-225 Differential Equations and Tra nsfonns 3.0 B+ 9.9
Pet-E-212 Propenies of Reservoir Fluids 2.0 A- 7.4
Pet-E-2 I 2L Propenies of Reservoir Fluids 1.0 A- 3.7
ScmcsterCH: 17.0 CumCH: 66.0 GPA: 3.247 CGPA: 3.483 Status: Promoted
Fall 2019
IS-201 - Islamic & Pakistan Studies-II 3.0 A- II.I
MA-343 Applied Probability and Statistics 3.0 A- II.I
MA-345 Numerical Methods in Computing 3.0 A- II.I
MA-345L Numerical Methods in Computing 1.0 A- 3.7
Pct-E-313 Well Logging 2.0 A 8.0
Pct-E-3 13L Well Logging 1.0 A 4.0
Pet-E-314 Reservoir Engineering 3.0 B+ 9.9
Pet-E-322 Natural Gas Processing & Pipeline Management 3.0 A- I I.I
Pel-E-322L Natural Gas Processing & Pipeline Management 1.0 A 4 .0
Semester CH: 20.0 Cum CH: 86.0 GPA: 3.700 CGPA: 3.534 Status: Promoted
Sprin&2020
Ch.E-35 1 Chemical Technology of Petroleum 3.0 A- I 1.1
Ch.E-351L Chemical Tcchnolo1,,y of Petroleum 1.0 A- 3.7
Pct-E-306 Drilling Engineering• 11 3.0 B 9 .0
Pct-E-306L Drilling Engineering• II 1.0 A- 3.7
Pct-E-315 Petroleum Production Engineering • I 3.0 A 12.0
Pct-E-316 Field Operations in Petroleum Engineering 3.0 A- I I.I
Pct-E-3 17 Petroleum Economics & Risk Analysis 3.0 C 6.0
ScmcsterCH: 17.0 CumCH: 103.0 GPA: 3.329 CGPA: 3.500 Status: Promoted
Transcript Academic Record Abdullah Muhammad Ishaq
UNIVERSIT Y OF ENGINEERI NG AND TECHNOLO GY (UET), LAHORE,
10300181
PAl(ISTAN
History of UET: Established as Madagan Technical College in March 1923, elevated to Madagan Engineering College in Feb,
1924, renamed as Punjab Engineering and Technical College in 1931 and again as Government College of Engineering and
Technology in 1956. Chartered West Pakistan University of Engineering and Technology by Ordinance No XXV of 1961. This
Ordinance was replaced and amended by University of Engineering and Technology Lahore Act of 1974.
1.0 Academic Evaluation System: Until undergraduate and postgraduate (M .Sc/ Masters 16 years) Entry Session 2014 and
until M.Sc/ M.Arch (18 years) Entry Session 20 15, letter grades and corresponding grade points as shown in Table I are used.
y
Table I: Letter Grades and Corresponding Grade Points
Grades A+ A B+ B B- C+ C C- D F W WF Df Tr
3.70 3.00 2. 70 2.30 2.00 I. 70 1.00 0.00
op
GP 4.00 3.30
From undergraduate and postgraduate (M.Sc/ Masters 16 years) Entry Session 20 15 and until M.Sc/ M.Arch/ M.Phil ( 18 years)
Entry Session 20 16, revised letter grades and corresponding grade points as shown in Table 2 are in use.
Grades without any points assignments are: "W" stands for Withdrawn : " WF" stands for Forced Withdrawal: " I" stands for
Incomplete: "IP" stands for In Progress, "DF" stands for Deficit subject in case of transferred students, "Tr"stands for transferred
an
subject.
2.0 Minimum Requirements: The minimum duration of the undergraduate degree programs shall not be less than four
-:-:- academic years in case of Engineering,Technol ogy, Computer Science, City and Regional Planning, Product and Industrial
Design, Business Administration and five academic years in case of Architecture. Prior to Session 2008, Building and
ic
The total minimum cred it hours required for the award of M.Sc/ M.Arch/ M. Phil degree is 30.
The total minimum credit hours required for the award of 16 years equivalent Masters degree of various denominations
varies from 60 to 75 after a 14 years equivalent degree.
Ap
3.0 Academic Achievement Measure: Students' academic achievement in each semester is reflected by the Semester Grade
Point Average (GPA) and the overall perfonnance is reflected by the Cumulative Grade point Average (CGPA). Both out of a
maximum of 4.00.
4.0 Subject Repeat Policy: Repeated subjects are shown with a (R) as suffix to the grade earned. In case of repetition
of a subject, the new grade earned, whether high or low, replaces the previous grade in computation of CGPA. In case a student
earns a "W" or " WF" grade in a subject being repeated, the previous grade earned in that subject will be retained in computation
ofCGPA and in assessing degree completion requirements.
5.0 Subject Classification: The word (Th) suffixed to a subject name represents Theory and (Pr) represents Practical on the
transcript. Some subjects may not be suffixed implying Theory only. In some cases, the subject number with a suffix " L" wou ld
represent practical of the subject having the number without th is suffix.
6.0 Bachelor's and 16 years Masters Degree Qualification Requirements: A minimum CGPA of2.0 is required for the
award of degree in the prescribed subject with no outstanding subject with a "W" grade and / or ' F' grade.
7.0 M.Sc./ M. Phil/ M. Arch Degree Qualification Requirements: A minimum of 30 credit hours with a CGPA of at least 2.5.
This may comprise of 24 credit hours of course work and 6 credit hours of thesis, Or, 30 credit hours of course work
with a non-credit design project.
8.0 CGPA and Percentage Equivalence: CGPA and Percentage systems are two different systems of assessment and no
equivalence as such can be specified. In CG PA system, grades reflect relative pos ition of the student in the class whereas
Percentage system is an absolute grading system refl ecting actual marks earned in the examination.
Address:
Controller of Examinations. University of Engineering and Technology, G.T. Road, Lahore 54890, Pakistan
www.uet.edu.pk E-mail: examination@uet.edu .pk Ph: 00 92 42 99029235 Fax: 00 92 42 9925 0202
Abdullahishaq166@gmail.com
y
King Abdullah University of Science and Technology
op
Faculty of Energy Resources and Petroleum Engineering
tC
From a very young age, Mathematics and Chemistry have always been the subjects close to my heart. I
have always been curious about finding the scientific logic behind any activity, especially while growing
up I read many books on the oil war and international relations. I was amazed to realize that one liquid
can be so important; hence, it is called the “black gold”. After deep pondering and scope assessment, I
an
have concluded that an MS in petroleum engineering is the best progression for my academic journey.
The undergraduate curriculum in Petroleum and Gas Engineering at University of Engineering and
Technology Lahore, introduces me to a wide variety of engineering subjects which includes various
ic
courses like Fundamental of Petroleum Engineering, Drilling Engineering I&II, Well Logging, Reservoir
Engineering, Principle of Reservoir Simulation, Reservoir Management, Properties of Reservoir Fluids, Gas
pl
Reservoir Engineering, Natural Gas Processing & Pipeline Management, Production Engineering I&II,
Petrophysics, Petroleum Geology & Geophysical Exploration, Well Testing, and Enhance Oil Recovery. I
also have knowledge about software skills like PipeSim, Eclipse Simulator, Kappa Ecrin, IPM Suit, and MS
Ap
Office.
I have also completed supplementary courses that will make up for the shortcomings in my academic
knowledge and expand my horizons. It also helped improve my independent study skills. To be informed
of the current trends and advances in technology, I regularly read the magazine and occasionally the SPE
journals.
I was the general secretary of the SPE Lahore student chapter during my third year. Along with detailed
planning and budgeting of university events, most of my time was spent on persuading and motivating
my fellow council members to carry out necessary tasks. These responsibilities have markedly improved
my communication, organizational, and leadership skills. The experience has taught me valuable decision
making and team management skills.
As a recent graduate, my experience with the professional world is limited to internship. However, I
decided to pursue higher education before committing myself to professional life. This seemed like the
optimal decision based on a few factors. Firstly, the modern job markets are highly competitive and there
is little edge graduation alone can provide. Also, the leading companies are looking for candidates with
specialization. Considering this, I decided to focus my education on accruing specific skillsets and
knowledge in the petroleum industry.
Statement of Purpose Abdullah Muhammad Ishaq
10300181
I am much passionate and motivated to learn about the new technologies related to petroleum
engineering so that I have a deep understanding of the problems facing by today’s industry. I am eager to
attend a Master of Petroleum Engineering to understand the solutions by which need of energy can be
fulfilled. The good reputation of high-quality education standards, an extremely distinguished faculty
members, and research facilities are the factors which have motivated me to choose for my Master studies
at the KAUST. Moreover, the research work of Dr. Hussein Hotei motivated and attracted my attentions
y
to work under his supervision. I have a keen interest in his work for he feasibly of CO2 storage in a deep
aquifer in Saudi Arabia, and I will be very grateful if he accepts my proposal for doing my MSc program
op
under his supervision.
I believe that pursuing MSc in Petroleum Engineering from KAUST will equip me with the necessary skills
and confidence to achieve my goals. I am hopeful that after completing my master’s degree, I will rejoin
tC
the industry as a more knowledgeable professional and I can teach in the best universities in my country
or abroad.
an
ic
pl
Ap
CV Abdullah Muhammad Ishaq
10300181
Abdullah Ishaq
Address: House. No: 939-1, Ayesha Lodge, H type colony, civil lines, Jhang Saddar.
Cell: +92-3164809885 Alternate Number: +92-302-7229500
Email: abdullahishaq998@gmail.com
Area of Focus Oil and Gas Production technology, Drilling and Reservoir technology
y
Career Objective ▪ Enthusiastic, highly- motivated engineering student with proven leadership
op
capabilities, who likes to take initiative and seek out new challenges and
capable of learning from new exposure within the structured framework of the
organization.
Experience •
tC
Virtual Internship Program Organized PioPetro of Marietta College & SPE
Egypt Section. (5th June- 28th July 2020)
• Internship at Rajian, Kal Oil field of Oil & Gas Development Company
Limited, Pakistan. (Aug 2021 – Sep 2021)
an
Project Hydraulic Fracture Treatment Design Optimization for a Tight Sand Gas Reservoir.
CGPA/Gra
University of Engineering and Technology (UET) Lahore Year
ic
de
BS Petroleum & gas Engineering 2021 3.574
pl