Professional Documents
Culture Documents
for carrying out software updates with
instruments:
vPad type Serial number: New software
update
VITA vPad From 2420155636 180208
comfort to 2421000000
VITA vPad From 2320152050 180208
excellence to 232100000
VITA vPad From 2820170050 180303
excellence
In order to keep the updates clear, there is an applicable
furnace update for every vPad update associated with
the same software version number.
Dear customer,
With this document, we would like to inform you about the new software update for your VITA
instrument and ask you to install the updates on your instrument in accordance with the
following instructions.
If you have any questions concerning this update, please consult your regional service partner
for VITA instruments. VITA instruments service is also available at:
• Tel.: +49 (0)77 61 / 562 – 101, ‐105, ‐106 or ‐114
• Fax: +49 (0)77 61 / 562 – 102
• Email: instruments‐service@vita‐zahnfabrik.com
General Procedure
Verify that the available software update is valid for this vPad or furnace.
Download new software update from the Internet and save it to a USB flash drive
Create a backup copy of your own users or materials and programs on a USB flash drive.
Install software update for vPad excellence / vPad comfort.
Check software version in the vPad
Check the update of the software version in the vPad in Settings, under Instrument Data.
Registration in VITA Update Messenger
Download and installation prerequisites
Internet access
Empty USB flash drive
1. Download new software update from the Internet and save it to a USB
flash drive
Step Input by user Function
1.1 In the Update Messenger, select
the link "To Download VITA vPad
comfort/excellence."
1.2 Select "Save" ‐> "Save as" (The
diagram on the right shows the
Windows 7 interface; but may
vary depending on the Windows
edition)
1.3 Save the still‐packed update file
(.zip file) directly onto an empty
USB flash drive (drive of the USB
flash drive: removable disk).
1.4 Double‐click on the downloaded
folder
1.5 Now copy the update file.
1.6 Paste the copied file into the first
level of the removable disk.
1.11 Disconnect the USB flash drive
from the computer
2. Create a backup co
opy of you
ur own useers and prrograms
Step Inp
put by user Instrument functio
on
2.1 Switch on thhe instrumennt using The lift moves tto the lower position
the main swwitch
2.2 Insert emptty USB flash d
drive
into the VITA vPad
2.3
Press button
2.4
Press button
2.5 Select user tto be exported.
2.6
Press button
2.7
Press button
The useer is saved to
o the USB flash drive
2.8
Press button
3. Install upd
date file
Importan nt note:
TThe lift mu
ust in be in the low
wer positioon + no proogram (inccl. standb
by) active
Step Inp
put by user Instrum
ment functio
on
3.1 Insert USB fflash drive wiith
software filee into the VITTA
vPad
3.2
Select button
3.2
Select button
Updatee is completed
3.3 Acknowledgge message w
with
Update completed
d
bu
utton
Im
mportant noote:
The USB flash drivee must remaiin plugged inn throughoutt the comple
ete installatio
on procedurre, and no
further buttons may b
be pressed!
Installation is then complete when the actual firing chambeer temperatu ure reappearrs.
IMPORTAN
NT:
The actuall firing cham
mber temperaature as
well as thee pre‐set standby tempeerature
must be displayed!
If "0°C" is displayed fo
or both of theese
values, theen the installlation of the
e update
is not yet ccomplete!
Informattion:
If, when the button is firsst pressed, the message "No new update found""
is displayyed, then confirm this m
message with the d press the
button and n again.
button
To perforrm a software
e update in the multi-furn
nace operatio
on, the instrum
ments must b
be individually updated:
the switcchbox must b
be removed a and the VITA vPad conne ected to each instrument in turn, and th
hen the
update pperformed acccording to these instructio
ons.
To obtain
n the desired uence of the instruments on the VITA
d display sequ A vPad, the in
nstruments m
must be
switched on after the software upd
date in the co
orresponding
g sequence u
using the main switch.
Example e: A VITA VAC CUMAT 6000 M and a VITA VACUMA AT 6000 MP are operated d via the VIT
TA
Switchbo ox with a VITAA vPad comffort. In this ca
ase, the VITAA VACUMAT T 6000 M sho ould be displaayed as
"No. 1" a
and the VITA VACUMAT 6000 6 MP as "No. 2" on th he VITA vPad d. In this case e, the VITA V
VACUMAT
6000 M m must first be switched on with the main switch. Afte er that, pleasse wait until tthe start men
nu is
displayedd on the VITAA vPad. Onlyy then may th he VITA VAC CUMAT 6000 0 MP - which should be displayed as
"No. 2 - b
be switched on
o with the m
main switch. T This instrumeent is now auutomatically a added to the start menu
in the desired position
n.
4.2
Press button
4.3 Please checkk the software
version to seee if the new
w
software has been installled
properly.
nt version is n
If the curren not
displayed, th
he update m must
be repeated d!
4.4 Then confirm
m with the
buttton
5. R
Reinstall yyour own profile an
nd program
ms
Step Inp
put by user Instrum
ment functio
on
5.1 Insert USB fflash drive wiith
previously ssecured userss and
programs innto the VITA vvPad
5.2
Press button
5.3
Press button
5.4
Press button
5.5 Select profille to be impo
orted
and press button
5.6
Press button
6. Reggistration in VITA Up
pdate Messenger
Step Inp
put by user FFunction
6.1 Bring up ww
ww.vita‐
zahnfabrik.ccom in the w
web
browser
6.2 Select "Servvice" ‐> "VITA
A
Update Messsenger"
6.3 Now select "Subscribe riight
now" and th hen follow th
he
registration steps.