Professional Documents
Culture Documents
Technical Guide Rs46 English
Technical Guide Rs46 English
TECHNICAL GUIDE
WWW.HYSTER.COM
TRUCK DIMENSIONS
h4
h3.1.2
h1
h6
Q h7
46-4ILS CH
h3.1.1
m1 m1 m2
c x y
l1
l2
100
6,096
2
TRUCK DIMENSIONS
½a
r1
Ast V
Wa
r2
b8
b2
b1.20 b10 b11
b8
b13
3
RATED CAPACITIES AND STACKING HEIGHTS
(shown in 1,000 kg.)
43 42
27 45 26.5 44
27 45 4-5 28.5 46 4-5
14 28 46 13.5 27.5 46
14 29 45 4-4 13.5 28.5 46 4-4
14 29 46 13.5 28.5 46
c3 c2 c1 c3 c2 c1 c3 c2 c1 c3 c2 c1
9‘6” containers 8‘6” containers 9‘6” containers 8‘6” containers
43 42
31 45 30.5 44
31 46 4-5 30.5 46 4-5
17 33 46 16.5 32.5 46
17 33 46 4-4 16.5 32.5 46 4-4
17 33 46 16.5 32.5 46
c3 c2 c1 c3 c2 c1 c3 c2 c1 c3 c2 c1
9‘6” containers 8‘6” containers 9‘6” containers 8‘6” containers
43 42
36 46 35.5 45
36 46 4-5 35.5 46 4-5
19 36 46 19 35.5 46
19 36 46 4-4 19 35.5 46 4-4
19 36 46 19 35.5 46
19 36 46 19 36 46 19 35.5 46 19 35.5 46
c3 c2 c1 c3 c2 c1 c3 c2 c1 c3 c2 c1
9‘6” containers 8‘6” containers 9‘6” containers 8‘6” containers
Stabilizer applied (truck static) Stabilizer NOT applied Stabilizer applied (truck static) Stabilizer NOT applied
43 43 42 42
36 46 36 46 35 45 35 45
40 46 38 46 4-5 39 46 37 46 4-5
28 41 46 21 36 46 27 41 46 20 37 46
28 41 46 21 38 46 4-4 27 41 46 20 37 46 4-4
28 41 46 21 36 46 27 41 46 20 37 46
28 41 46 28 41 46 21 38 46 21 36 46 27 41 46 27 41 46 20 37 46 20 37 46
28 41 46 28 41 46 21 38 46 21 36 46 46-41S CH 27 41 46 27 41 46 20 37 46 20 37 46 46-41S CH
c3 c2 c1 c3 c2 c1 c3 c2 c1 c3 c2 c1 c3 c2 c1 c3 c2 c1 c3 c2 c1 c3 c2 c1
9‘6” containers 8‘6” containers 9‘6” containers 8‘6” containers 9‘6” containers 8‘6” containers 9‘6” containers 8‘6” containers
c1 c2 c3
Note: All load centres c1, c2, c3 are taken from the front face of the (front) Tyres,
1865mm 3815mm 6315mm deduct 100mm for load centres taken from the front face of the stabiliser.
4
RATED CAPACITIES AND STACKING HEIGHTS
(shown in 1,000 kg.)
43 42
36 46 35 45
40 46 4-5 39 46 4-5
23 41 46 22 40 46
23 41 46 4-4 22 40 46 4-4
23 41 46 22 40 46
23 41 46 23 41 46 22 40 46 22 40 46
23 41 46 23 41 46 46-41L CH 22 40 46 22 40 46 46-41L CH
c3 c2 c1 c3 c2 c1 c3 c2 c1 c3 c2 c1
9‘6” containers 8‘6” containers 9‘6” containers 8‘6” containers
Stabilizer applied (truck static) Stabilizer NOT applied Stabilizer applied (truck static) Stabilizer NOT applied
43 43 42 42
36 46 36 46 35 45 35 45
40 46 40 46 4-5 39 46 39 46 4-5
29 41 46 23 41 46 28 41 46 22 40 46
30 41 46 23 41 46 4-4 29 41 46 22 40 46 4-4
30 41 46 23 41 46 29 41 46 22 40 46
30 41 46 30 41 46 23 41 46 23 41 46 29 41 46 29 41 46 22 40 46 22 40 46
30 41 46 30 41 46 23 41 46 23 41 46 46-41LS CH 29 41 46 29 41 46 22 40 46 22 40 46 46-41LS CH
c3 c2 c1 c3 c2 c1 c3 c2 c1 c3 c2 c1 c3 c2 c1 c3 c2 c1 c3 c2 c1 c3 c2 c1
9‘6” containers 8‘6” containers 9‘6” containers 8‘6” containers 9‘6” containers 8‘6” containers 9‘6” containers 8‘6” containers
Stabilizer applied (truck static) Stabilizer applied Stabilizer Stabilizer applied (truck static) Stabilizer applied Stabilizer
(truck static) NOT applied (truck static) NOT applied
43 36 43 42 35 43
36 46 35 45
40 46 41 46 41 46 4-5 39 46 41 46 41 46 4-5
29 41 46 28 41 46
30 41 46 32 41 46 25 41 46 4-4 29 41 46 32 41 46 25 41 46 4-4
30 41 46 29 41 46
30 41 46 32 41 46 25 41 46 29 41 46 29 41 46 32 41 46 25 41 46
30 41 46
30 41 46 30 41 46 32 41 46 25 41 46 46-41XLS CH
29 41 46 29 41 46 32 41 46 25 41 46 46-41XLS CH
c3 c2 c1 c3 c2 c1 c3 c2 c1 c3 c2 c1 c3 c2 c1 c3 c2 c1 c3 c2 c1 c3 c2 c1
9‘6” containers 8‘6” containers 9‘6” containers 9‘6” containers 9‘6” containers 8‘6” containers 9‘6” containers 9‘6” containers
41 46 40 46 4-5
31 32 41 46 23 24 40 46 4-4
31 32 41 46 23 24 40 46
46-41LS CH
21 32 41 46 23 24 40 46 46-41XLS CH
r2 c3 c2 c1 r2 c3 c2 c1 r2 r1
9‘6” containers 9‘6” containers
c1 c2 c3 r1 r2
Note: All load centres c1, c2, c3 are taken from the front face of the (front) Tyres,
1865mm 3815mm 6315mm deduct 100mm for load centres taken from the front face of the stabiliser. 1865mm 6400mm
5
RATED CAPACITIES AND STACKING HEIGHTS
(shown in 1,000 kg.)
39
24 43 39
28 43
24 45 4-5
24 45 28 45 4-5
28 45
10.5 24 45 24 45 4-4
10.5 13 28 45 13 28 45 4-4
10.5 24 45 10.5 24 45 13 28 45 13 28 45
11 24 45
10.5 24 45 10.5 24 45 13 28 45
13 28 45 13 28 45
46-24 IH 46-24 IH
46-28 IH 46-28 IH
c3 c2 c1 c3 c2 c1 c3 c2 c1
c3 c2 c1 c3 c2 c1 c3 c2 c1
swap-bodies and containers 9‘6” containers 8‘6” containers swap-bodies and containers 9‘6” containers 8‘6” containers
39 39
33 43 33 43
33 46 4-5 36 46 4-5
33 46 38 46
16.5 33 46 46 4-4 20 38 46 20 38 46 4-4
16.5 33
16.5 33 46 16.5 33 46 20 38 46 20 38 46
16.5 33 46 18 35 46
46-33 IH 16.5 33 46 16.5 33 46 46-33 IH 46-38L IH 20 38 46 20 38 46 46-38L IH
c3 c2 c1 c3 c2 c1 c3 c2 c1 c3 c2 c1 c3 c2 c1 c3 c2 c1
swap-bodies and containers 9‘6” containers 8‘6” containers swap-bodies and containers 9‘6” containers 8‘6” containers
RS 46-38S IH SPREADER
18 35 46 18 35 46 25 38 46 25 38 46
18 35 46 25 38 46
46-38S IH 18 35 46 18 35 46 46-38S IH 46-38S IH 25 38 46 25 38 46 46-38S IH
c3 c2 c1 c3 c2 c1 c3 c2 c1 c3 c2 c1 c3 c2 c1 c3 c2 c1
swap-bodies and containers 9‘6” containers 8‘6” containers swap-bodies and containers 9‘6” containers 8‘6” containers
RS 46-38LS IH SPREADER
20 38 46 20 38 46 27 38 46 27 38 46
20 38 46 27 38 46
46-38LS IH 20 38 46 20 38 46 46-38LS IH 46-38LS IH 27 38 46 27 38 46 46-38LS IH
c3 c2 c1 c3 c2 c1 c3 c2 c1 c3 c2 c1 c3 c2 c1 c3 c2 c1
swap-bodies and containers 9‘6” containers 8‘6” containers swap-bodies and containers 9‘6” containers 8‘6” containers
c1 c2 c3
Note: All load centres c1, c2, c3 are taken from the front face of the (front) Tyres,
1865mm 3815mm 6315mm deduct 100mm for load centres taken from the front face of the stabiliser.
6
RATED CAPACITIES AND STACKING HEIGHTS
(shown in 1,000 kg.)
36 46 4-5 36 46 4-5
22 38 46 4-4 31 38 46 4-4
22 38 46 31 38 46
22 38 46 31 38 46
46-38XLS IH 22 38 46 46-38XLS IH
46-38XLS IH 31 38 46 46-38XLS IH
c3 c2 c1 c3 c2 c1 c3 c2 c1 c3 c2 c1
swap-bodies and containers 9‘6” containers swap-bodies and containers 9‘6” containers
7
RS 46-29, RS 46-33, RS 46-36, RS 46-41S CONTAINER HANDLERS
1-5-3 Load capacity at load centre distance c3 without/with stabiliser (1) Q3 kg 14,000 15,000 17,000 16,000 19,000 18,000 21,000 28,000
1-6-1 Load centre distance c1 (2) c1 mm 1,865 1,865 1,865 1,865
1-6-2 Load centre distance c2 (2) c2 mm 3,815 3,815 3,815 3,815
1-6-3 Load centre distance c3 (2) c3 mm 6,315 6,315 6,315 6,315
1-8 Load distance, ctr of drive axle to face of front Tyres/front of stabiliser x mm 835 n/a 835 n/a 930 n/a 930 1030
1-9 Wheelbase y mm 6,200 6,200 6,200 6,200
1-10 Stacking height at first row (number x container height) # 5 x 9’ 6” 5 x 9’ 6” 5 x 9’ 6” 5 x 9’ 6”
2-1 Service weight kg 68,500 72,200 79,300 83,600
WEIGHT
2-2-1 Axle loading with load, front / rear at c1 kg 101,350 13,150 101,100 17,100 103,200 22,100 105,400 24,200
2-3-1 Axle loading without load, front / rear at c1 kg 35,300 33,200 35,000 37,200 36,500 42,800 38,700 44,900
3-1 Tyre type Pneumatic Pneumatic Pneumatic Pneumatic
3-2 Tyre size, front 18.00-25 40PR 18.00-25 40PR 18.00-33 36PR 18.00-33 36PR
WHEELS
3-3 Tyre size, rear 18.00-25 40PR 18.00-25 40PR 18.00-33 36PR 18.00-33 36PR
3-5 Wheels, number front / rear (X = driven wheels) x4 / 2 x4 / 2 x4 / 2 x4 / 2
3-6 Tread, front b10 mm 3,703 3,703 3,703 3,703
3-7 Tread, rear b11 mm 3,060 3,060 3,060 3,060
4-1 Boom angle minimum / maximum (°) 0 / 59 0 / 59 0 / 59 0 / 59
4-2 Height of boom lowered h1 mm 4,700 4,700 4,795 4,795
4-4-1 Lift height at load centre c1 (3) h3.1 mm 15,260 15,260 15,355 15,355
4-4-2 Lift height at load centre c2 (3) h3.2 mm 13,850 13,850 13,945 13,945
4-5 Height, boom extended h4 mm 18,110 18,110 18,205 18,205
4-7 Height of overhead guard (cabin) h6 mm 3,720 3,720 3,815 3,815
4-8 Seat height to SIP (4) h7 mm 2,555 2,555 2,650 2,650
4-15 Height under Twistlock - lowered (3) h13 mm 1,345 1,345 1,440 1,440
DIMENSIONS
8
RS 46-41L, RS 46-41LS, RS46-41XLS CONTAINER HANDLERS
1-5-3 Load capacity at load centre distance c3, without/with stabiliser (1) Q3 kg 23,000 21,000 23,000 30,000 25,000 34,000
1-6-1 Load centre distance c1 (2) c1 mm 1,865 1,865 1,865
1-6-2 Load centre distance c2 (2) c2 mm 3,815 3,815 3,815
1-6-3 Load centre distance c3 (2) c3 mm 6,315 6,315 6,315
1-8 Load distance, centre of drive axle to face of front Tyre/front of stabiliser x mm 930 n/a 930 1030 930 1030
1-9 Wheelbase y mm 6,700 6,700 7,500
1-10 Stacking height at first row (number x container height) # 5 x 9’ 6” 5 x 9’ 6” 5 x 9’ 6”
2-1 Service weight kg 82,600 84,600 84,650
WEIGHT
2-2-1 Axle loading with load, front / rear at c1 kg 103,400 25,200 105,600 25,000 103,350 27,300
2-3-1 Axle loading without load, front / rear at c1 kg 38,200 44,400 40,400 44,200 41,300 43,350
3-1 Tyre type Pneumatic Pneumatic Pneumatic
3-2 Tyre size, front 18.00-33 36PR 18.00-33 36PR 18.00-33 36PR
WHEELS
3-3 Tyre size, rear 18.00-33 36PR 18.00-33 36PR 18.00-33 36PR
3-5 Number of wheels, front / rear (x = driven wheels) x4 / 2 x4 / 2 x4 / 2
3-6 Tread, front b10 mm 3,703 3,703 3,703
3-7 Tread, rear b11 mm 3,060 3,060 3,060
4-1 Boom angle minimum / maximum (°) 0 / 59 0 / 59 3 / 58
4-2 Height of boom lowered h1 mm 4,795 4,795 5,457
4-4-1 Lift height at load centre c1 (3) h3.1 mm 15,355 15,355 15,225
4-4-2 Lift height at load centre c2 (3) h3.2 mm 13,945 13,945 14,158
4-5 Height, boom extended h4 mm 18,205 18,205 18,420
4-7 Height of overhead guard (cabin) h6 mm 3,815 3,815 3,815
4-8 Seat height to SIP (4) h7 mm 2,650 2,650 2,650
4-15 Height under twistlock - lowered (3) h13 mm 1,440 1,440 1,835
DIMENSIONS
9
RS 46-24, RS 46-28, RS 46-33, RS 46-38L INTERMODAL HANDLERS
1-5-3 Load capacity at load centre distance c3 without/with stabiliser (1) Q3 kg 11.000 13,000 13.000 15,000 17.000 15,000 20.000 28,000
1-6-1 Load centre distance c1 (2) c1 mm 1,865 1,865 1,865 1,865
1-6-2 Load centre distance c2 (2) c2 mm 3,815 3,815 3,815 3,815
1-6-3 Load centre distance c3 (2) c3 mm 6,315 6,315 6,315 6,315
1-8 Load distance, ctr of drive axle to face of front Tyres/front of stabiliser x mm 835 n/a 835 n/a 930 n/a 930 n/a
1-9 Wheelbase y mm 6,200 6,200 6,200 6,700
1-10 Stacking height at first row (number x container height) # 5 x 9’ 6” 5 x 9’ 6” 5 x 9’ 6” 5 x 9’ 6”
2-1 Service weight kg 72,400 76,100 83,200 86,500
WEIGHT
2-2-1 Axle loading with load, front / rear at c1 kg 105,400 12,000 105,200 15,900 108,800 20,400 108,800 23,700
2-3-1 Axle loading without load, front / rear at c1 kg 40,800 31,600 40,500 35,600 42,100 41,100 43,600 42,900
3-1 Tyre type Pneumatic Pneumatic Pneumatic Pneumatic
3-2 Tyre size, front 18.00-25 40PR 18.00-25 40PR 18.00-33 36PR 18.00-33 36PR
WHEELS
3-3 Tyre size, rear 18.00-25 40PR 18.00-25 40PR 18.00-33 36PR 18.00-33 36PR
3-5 Wheels, number front / rear (X = driven wheels) x4 / 2 x4 / 2 x4 / 2 x4 / 2
3-6 Tread, front b10 mm 3,703 3,703 3,703 3,703
3-7 Tread, rear b11 mm 3,060 3,060 3,060 3,060
4-1 Boom angle minimum / maximum (°) 0 / 59 0 / 59 0 / 59 0 / 59
4-2 Height of boom lowered h1 mm 4,700 4,700 4,795 4,795
4-4-1 Lift height at load centre c1 (3) h3.1 mm 14,780 14,780 14,875 14,875
4-4-2 Lift height at load centre c2 (3) h3.2 mm 13,375 13,375 13,470 13,470
4-5 Height, boom extended h4 mm 18,110 18,110 18,205 18,205
4-7 Height of overhead guard (cabin) h6 mm 3,720 3,720 3,815 3,815
4-8 Seat height to SIP (4) h7 mm 2,555 2,555 2,650 2,650
4-15 Height under Twistlock - lowered (3) h13 mm 885 885 980 980
DIMENSIONS
10
RS 46-38S, RS 38LS, RS 46-41XLS INTERMODAL HANDLERS
1-5-3 Load capacity at load centre distance c3, without/with stabiliser (1) Q3 kg 18,000 25,000 20,000 27,000 22,000 31,000
1-6-1 Load centre distance c1 (2) c1 mm 1,865 1,865 1,865
1-6-2 Load centre distance c2 (2) c2 mm 3,815 3,815 3,815
1-6-3 Load centre distance c3 (2) c3 mm 6,315 6,315 6,315
1-8 Load distance, centre of drive axle to face of front Tyre/front of stabiliser x mm 930 1030 930 1030 930 1030
1-9 Wheelbase y mm 6,200 6,700 7,500
1-10 Stacking height at first row (number x container height) # 5 x 9’ 6” 5 x 9’ 6” 5 x 9’ 6”
2-1 Service weight kg 87,500 88,500 88,500
WEIGHT
2-2-1 Axle loading with load, front / rear at c1 kg 111,000 22,500 111,000 23,500 110,055 24,488
2-3-1 Axle loading without load, front / rear at c1 kg 44,200 43,300 45,800 42,700 46,900 41,600
3-1 Tyre type Pneumatic Pneumatic Pneumatic
3-2 Tyre size, front 18.00-33 36PR 18.00-33 36PR 18.00-33 36PR
WHEELS
3-3 Tyre size, rear 18.00-33 36PR 18.00-33 36PR 18.00-33 36PR
3-5 Number of wheels, front / rear (x = driven wheels) x4 / 2 x4 / 2 x4 / 2
3-6 Tread, front b10 mm 3,703 3,703 3,703
3-7 Tread, rear b11 mm 3,060 3,060 3,060
4-1 Boom angle minimum / maximum (°) 0 / 59 0 / 59 3 / 58
4-2 Height of boom lowered h1 mm 4,795 4,795 5,457
4-4-1 Lift height at load centre c1 (3) h3.1 mm 14,875 14,875 14,765
4-4-2 Lift height at load centre c2 (3) h3.2 mm 13,470 13,470 13,698
4-5 Height, boom extended h4 mm 18,205 18,205 18,420
4-7 Height of overhead guard (cabin) h6 mm 3,815 3,815 3,815
4-8 Seat height to SIP (4) h7 mm 2,650 2,650 2,650
4-15 Height under twistlock - lowered (3) h13 mm 980 980 1,835
DIMENSIONS
11
POWERTRAINS
1-1 Manufacturer HYSTER HYSTER HYSTER
GENERAL
7-1 Engine manufacturer / model Cummins / QSM11 Cummins / QSM11 Cummins / QSM11
7-1a EPA / CE Tier compliance Tier 3 / Stage IIIA Tier 3 / Stage IIIA Tier 3 / Stage IIIA
7-2 Engine power output according to ISO 1585 kW 224 250 224
7-2-1 Engine power output - peak kW 224 272 224
ENGINE
8-1 Drive control / transmission Type / # Hydrodynamic Transmission Hydrodynamic Transmission Hydrodynamic Transmission
8-2 Transmission manufacturer / type Type / # Spicer Off-Highway / TE-27 Spicer Off-Highway / TE-32 Spicer Off-Highway / TE-27
8-4 Transmission speeds forward / backward # 4/4 4/4 4/4
DRIVE
9-1 Spreader manufacturer / type Type / # Elme / 817 Elme / 817 Elme / 857
9-1-1 Pile slope, mechanical without PPS ° 3 3 3
9-1-2 Pile slope, mechanical with PPS ° 1.5 1.5 1.5
SPREADER
NOTES: NOTICE:
Specifications are affected by the condition of the vehicle and how it is equipped, as well Care must be exercised when handling elevated loads. Operators must be
as the nature and condition of the operating area. Inform your dealer of the nature and trained and must read, understand and follow the instructions contained in
condition of the intended operating area when purchasing your Hyster® truck. the Operating Manual.
(1) Load capacities shown with mechanical pile slope (MPS) spreader. Deduction for All values are nominal values and they are subject to tolerances. For further
using powered pile slope spreader is approx. 900 kg information, please contact the manufacturer.
(2) From face of front Tyres. Hyster products are subject to change without notice.
(3) With Mechanical Pile Slope (MPS). For optional Powered Pile Slope (PPS) function:
Lift trucks illustrated may feature optional equipment. Values may vary with
deduct 310 mm.
alternative configurations.
(4) Full suspension seat in depressed position.
(5) Spreader at 8.0 m high, central above front axle; container 0 mm in front of Tyres;
includes 100 mm clearance. CERTIFICATION: Hyster lift trucks meet the design and construction requirements of
(6) Gradeability figures provided for comparison of tractive performance, but are not B56.1-1969, per OSHA Section 1910.178(a)(2), and also comply with the B56.1 revision in effect
at time of manufacture. Certification of compliance with the applicable ANSI standards
intended to endorse the operation of vehicle on the stated inclines.
appears on the lift truck. Performance specifications are for a truck equipped as described
(7) Add 2 dB(A) for option with additional cab fan.
under Standard Equipment on this Technical Guide. Performance specifications are affected
by the condition of the vehicle and how it is equipped, as well as by the nature, condition of
All capacities are according to EN1459. the operating area, proper service and maintenance of the vehicle. If these specifications are
All specifications and capacities are valid for trucks equipped with a Hyster® container critical, the proposed application should be discussed with your dealer.
handling spreader for handling ISO containers.
NOTE: Specifications, unless otherwise listed, are for a standard truck without
optional equipment.
Safety: This truck conforms to the current
EU requirements. Specification data is based on VDI 2198.
12
STANDARD AND OPTIONAL EQUIPMENT
PERFORMANCE STD OPT APPEARANCE STD OPT
Cummins QSM11 diesel engine rated 224 kW Stage IIIA Hyster yellow paint base truck and spreader X
X
wastegate turbocharger, water cooled Special paint base truck and spreader X
Cummins QSM11 diesel engine rated 250 kW Stage IIIA X ERGONOMICS STD OPT
wastegate turbocharger, water cooledd Powered partial-sliding cabin, including additional mirrors on top of fenders X
Hibernate Idle X Powered full-sliding cabin, including additional steps and handrails X
Hydraulically driven on-demand cooling fan X Isolated mounting for low noise and vibration X
120 amp alternator X Coat hook X
Powertrain protection system X Front, top and rear wipers X
Spicer Off-Highway TE-27 4-speed auto-shifting transmission X Front and rear window defrosters X
Spicer Off-Highway TE-32 4-speed auto-shifting transmission X Left side handrails, stairway and cabin door X
Kessler D102 drive axle with wet disc brakes X RH side door X
DRIVE STD OPT Right side handrails and stairway X
Traction speed limiter when carrying container (adjustable) X Stair lights X
Traction speed limiter - unconditional (adjustable) X Multifunction display panel X
Steer axle with full stroke steer cylinder for tight turning radius X Seat-side joystick hydraulic control X
Steer axle with reduced stroke steer cylinder for longer Tyre life X Steering wheel spinner knob X
Premium E4 Pneumatic bias ply Tyres X Directional control lever X
Pemium Slick bias ply Tyres X Interior wide angle mirrors X
Premium Slick radial Tyres X Heater with 3 speed fan X
18.00-25 40PR drive and steer Tyres X Telescoping & tilting steering column X
18.00-33 36PR drive and steer Tyres X Recirculation fan X
LIFT STD OPT DC/DC converter 24 volt/12 volt with socket X
On-demand load sensing hydraulic system X 2nd 12 volt socket X
Automatic throttle-up when lifting (in neutral or inching) X Accessory mounting post X
2-stage boom for 5-high 1st row stacking X Rear locking console in cab X
6-high 1st row stacking X Heated top window X
3B6 load moment Indicator with monochrome display X "H"-pattern front wiper X
3B6 load moment Indicator with color display IH CH Air conditioning X
High speed hoist system - below 10 tons X Sun shades on top and rear X
Hydraulic system temperature protection X Radio preparation set-up (wiring, two speakers and antenna) X
Container weighing system SOLAS compliant X Reading light X
HANDLING STD OPT Operator presence system X
Hyster model 817 spreader, with rotation (CH models) X Mechanical suspension seat X
Hyster model 857 spreader, with rotation (IH models) X Deluxe air suspension seat X
Mechanical Pile Slope X Low backrest X
Powered Pile Slope IH CH High backrest X
Powered dampening X Cloth seat cover X
Wide Twistlock Position (WTP) container handling X Vinyl seat cover X
Intermodal handling - top / bottom pick X Seat heating X
Barge container handling X 2-point high visibility seatbelt X
4 lifting eyes located on end beam corners X 3-point high visibility seatbelt X
4 lifting eyes located under centre beam of spreader X OPERATION STD OPT
Container guides - located outside near twistlocks X Electric air horn 112 dB X
Container guides - 500mm inset, heavy duty X Visible alarm – Amber strobe light, key switch activated X
Rotation stops with override X Audible alarm – reverse direction activated 82–102 dB(A), self-adjusting X
Automatic extend/retract X Forward motion alarm X
Stops for 30' containers X Seatbelt interlock for engine start X
Vertical lift X Seatbelt indicator light on top of cab X
Tool changer X Tyre pressure monitoring system X
Attachments for steel load handling X Lockable battery disconnect switch X
Attachments for wind industry load handling X Battery jump start connection (NATO plug) X
VISIBILITY STD OPT Adjustable automatic “empty seat” engine shutdown X
External wide angle mirrors mounted on rear of front fenders X Trainer seat X
External wide angle mirrors mounted on top of front fenders IH CH Non-locking fuel cap X
Rear view camera system X Lockable fuel cap X
Halogen work lights X Hyster Tracker wireless asset management - monitoring X
LED work lights X Hyster Tracker wireless asset management - access / verification X
High Performance LED work lights X Auto greasing system for basic truck & outer boom X
LED twistlock indicator lights X Auto greasing system for inner boom and spreader X
LED stop/tail/brake lights X 24 volt electrical system X
Turn signals, hazard & marker lights (LED) X Engine block heater 220 volt X
SUPPLEMENTAL STD OPT Steer wheel lug nut protection X
Literature package Engine compartment light X
Operator’s manual
Warranty: 12 months / 2,000 hours manufacturer’s warranty X
CE Certification X
13
FRONT END EQUIPMENT
14
FRONT END EQUIPMENT
15
STRONG PARTNERS. TOUGH TRUCKS.
TM
HYSTER EUROPE
Centennial House, Frimley Business Park, Frimley, Surrey, GU16 7SG, England.
Tel: +44 (0) 1276 538500
HYSTER-YALE UK LIMITED trading as Hyster Europe. Registered Address: Centennial House, Building 4.5, Frimley Business Park, Frimley, Surrey GU16 7SG, United Kingdom.
Registered in England and Wales. Company Registration Number: 02636775.
HYSTER, and FORTENS are registered trademarks in the European Union and certain other jurisdictions.
MONOTROL® is a registered trademark, and DURAMATCH and are trademarks in the United States and in certain other jurisdictions.
Hyster products are subject to change without notice. Forklift trucks illustrated may feature optional equipment.