Professional Documents
Culture Documents
Center Taxy Way-Yellow
Center Taxy Way-Yellow
ILP-T
8" Uni- or Bidirectional High-Intensity
Inset Light
Compliance with Standards • Excellent light performances due to the reflector lamp:
- Improved luminous efficacy.
ICAO: Annex 14 Volume I, 5th Edition 2009, Paragraphs 5.3.16
- Identical lamp performance: each lamp change with a new
and 5.3.19 for use in CAT I, II and III
reflector.
NATO: STANAG 3316 - High optical stability: no internal adjustment needed as the pre-
French STNA focus lamp is always correctly positioned.
• Possibility of separate lighting for bi-directional lights.
CAP 168
• Quick and easy maintenance: minimal components for
BS 3224 disassembly/assembly.
• Non-sealed prisms for easy replacement
• Valve for water-tightness testing.
• Many common components with other lights in the same range.
• Easy handling due to small size and light weight.
Technical Characteristics
Component Description
Lamp: 40W 6.6A pre-focused halogen lamp with a
dichroic reflector. Lamp life >1500h at 6.6A.
Power Supply: The fitting is delivered equipped of one or two
Uses (option of bi-directional fittings) two-pole
secondary FAA plug(s) to connect it to one (or two)
ILP-T is a 8” uni- or bidirectional high-intensity inset light. isolating transformer(s).
• Taxiway Centre Line Photometry: Distribution and homogeneity comply with ICAO
• Rapid Exit Taxiway and FAA recommendations.
• Stopbar Color: Green, Yellow and Red dichroic filters. Chromaticity
• Clearance Bars complies with ICAO and FAA.
• Apron lead-in Finish: All external parts are made of anodized tempered
aluminum alloy casting. All fixings and fastenings
Features are stainless steel.
Fixing on By two M10 studs and nuts (supplied with the base
• Low power consumption:
support: or the adapter ring).
- 40 Watts (one lamp version)
Projection: 6.35 mm / 1/4”
- 2 × 40 Watts (two lamps version).
• Lamp life greater than 1,500 hours at 6.6 Amps. External 203 mm / 8”
• Low projection: 6.35 mm (1/4”). diameter:
DS-0061_v1.0 1
Taxiway Lighting
ILP-T
Packing Data
ILP-TB ILP-TU
Designation Volume Dimensions mm Weight
m3 kg
ILP-T Fitting with one 0,007 220 × 220 × 145 2.4
connector
ILP-T Fitting with two 0,007 220 × 220 × 145 2.5
connectors
Design
Components
1. Body
2. Silicone prism gasket
3. Non-sealed prism
4. Prism support
5. Dichroic filter with gasket
6. Optical support
7. Lamp support
8. Pre-focused halogen dichroic reflector lamp 40W at 6.6A
9. Lamp spring
10. Optical support screws
11. Cover gasket
12. Obturator
13. Cable sub-assembly for short cover
14. Film disk cut out *
15. Film disk cut out holder *
16. Cut out relay *
17. Cable terminal
18. Valve for water tightness tests
19. Cover screw
20. Cable subassembly for long cover
21. Complete short cover
22. Complete long cover SHORT COVER LONG COVER
DS-0061_v1.0 2
Taxiway Lighting
ILP-T
Order Codes
The table below is a guide to order codes for a fitting with available component parts.
DS-0061_v1.0 3
Taxiway Lighting
ILP-T
Fitting Types
DS-0061_v1.0 4
Taxiway Lighting
ILP-T
Installation Options
Description
• On 8” shallow base 100 mm deep with side access (see FIG 1) or with bottom access (see FIG 2). Shallow Cover.
• On 8” shallow base 134 mm deep with side access (see FIG 3) or with bottom access (see FIG 4). Long Cover.
• On FAA L-868B deep base by means of 12”/ 8” adapter ring (see FIG 5).
• On SR8 seating ring by means of SR8/8”adapter ring.
Note: When the fitting is equipped with a cut-out device (relay or film disk), a long cover must be used and the minimum depth of the base must
be 134 mm. For more information, see the Design section*.
Image examples
DS-0061_v1.0 5
Taxiway Lighting
ILP-T
Photometric
This section includes photometric examples of different light configurations.
Green Light Narrow Beam for Straight Sections I average: 340 cd I max /
Yellow Light Narrow Beam for Straight Sections I average: 380 cd I
I min: 2.2
max / I min: 1.8
Red Light Narrow Beam for Straight Sections I average: 270 cd I max / I Green Light Wide Beam for Straight Sections I average : 315 cd I max / I
min: 1.7 min: 2.3
Yellow Light Wide Beam for Straight Sections I average: 270 cd I max / I Red Light Wide Beam for Straight Sections I average: 260 cd I max / I
min: 1.7 min: 2.6
DS-0061_v1.0 6
Taxiway Lighting
ILP-T
Green Light Beam Curved for Curved Sections I average: 110 cd I max / Yellow Light Wide Beam for Straight Sections I average: 130 cd I max / I
I min: 2.8 min: 2.8
ILP-TB
ILP-TU
www.adbsafegate.com
Product specifications may be subject to change, and specifications listed here are not
binding. Confirm current specifications at time of order.
DS-0061_v1.0 7