we
TECHNICAL INFORMATION
SUBJECT: Improved High Capacity Work Light Relay
PRODUCTS AFFECTED: TM320 (02090867 - 02091502)
TERRITORIES AFFECTED: UK & Ireland, Spain, South-East Asia, South America, Russia, Portugal,
Poland, North America (USA and Canada), Nordic Territories and Baltic States, Middle East, Mexico,
ltaly, India, Holland, Gulf States, Germany, France (and French territories), Eastern Europe, China,
Caribbean Islands, Brasil, Belgium, Australia and New Zealand, Africa
TO BE CARRIED OUT: Information Only
SAFETY NOTICE: Instructions in Service Bulletins assume thatthe engineer has a sound knowledge of safety procedures and
has been trained in the maintenance and repair of JCB products. you are unsure or do not understand information contained in
this or other bulletin, ask your supervisor or contact JCB Service for advice. REMEMBER SAFETY MUST COME FIRST,
‘nana cerane macnn phtcSpr rhs wiht rarsermaren an es SERVE
‘inne aman totevesb cares garrcs trent) Jeb eo tse ana a6 ay
Introduction 3. Disconnect the battery from the machine.
Reports have been received in the field of inoperative
machine work lights.
Investigation shows that the existing high capacity
‘work light relay in the TM320 machines up to the
serial number 02091502 have failed prematurely due
to intemal failure.
From the machine serial number 02091502, the
existing 35A high capacity work light relay has been
superseded by the new work light relay.
In the event of field report, we recommend you to
replace the existing black coloured work light relay
with the new blue coloured work light relay. Refer to
Table 1
Table 1.
Part Number Description
332103148 Existing work light relay
(Black)
716/E0156 New work light relay (Blue)
Refer to the procedure in this service bulletin to
replace the relay.
Procedure
1. Make the machine safe. Refer to the procedure
in the Operator's Manual,
2. Tum the ignition switch to the OFF position.
4, Remove the existing black coloured work light
relay from the machine.
5, Install the new blue coloured work light relay to
the machine.
6. Connect the battery to the machine.
7. Start the machine and test.
Parts List
Table 2.
Item | PartNo. [Description | Qty.
‘A__| 716/E0156 |Work light relay | 1
414 1207-4 114