Professional Documents
Culture Documents
Installation Instructions
for Hyundai Audio Models:
TL-01 (Tucson)
DM-01 (Santa Fe)
AD-01 (Elantra)
GD-03 (i30)
.
This firmware contains Apple CarPlay™, Android
Auto™, Bluetooth enhancements and bug fixes.
It supersedes all firmware for the above models
issued prior to December 11, 2018.
1. Preparation:
a. Ensure the USB memory stick containing the firmware upgrade file
is available*.
b. Ensure the vehicle battery is in good condition; the engine can be
running during the upgrade.
c. Switch the audio set on.
d. Allow approximately 17 minutes for the complete firmware
upgrade.
*PLEASE NOTE:
• If additional copies of the firmware are required, simply copy the
file ‘tll3000h.hdf’ onto a blank, freshly formatted USB memory stick
of 500MB or greater capacity with no other files present.
• The file may be downloaded using your dealer login from
www.cartronics.net.au (Menu>Firmware Upgrade).
Page 1
2. Insert the USB stick
containing the firmware into
the USB socket located on
the dashboard. Wait 20
seconds.
(i30 model shown)
Firmware Installation Instructions for Hyundai audio TL-01, DM-01, AD-01, GD-03 Page 2
6. Tap the DEVICE
INFORMATION icon on the
audio screen.
Firmware Installation Instructions for Hyundai audio TL-01, DM-01, AD-01 GD-03 Page 3
10. During the upgrade the
screen will switch off and
then show SW UPGRADE.
Again, during this time, the
USB memory stick must not
be removed and the ignition
must not be switched off.
Firmware Installation Instructions for Hyundai audio TL-01, DM-01, AD-01, GD-03 Page 4
14. Tap the SYSTEM icon on the
audio screen.
Firmware Installation Instructions for Hyundai audio TL-01, DM-01, AD-01, GD-03 Page 5
18. Tap YES to begin the
upgrade. This step of the
upgrade will take
approximately 8 minutes to
complete.
Firmware Installation Instructions for Hyundai audio TL-01, DM-01, AD-01, GD-03 Page 6
22. Press the SETUP button
located on the front of the
audio set.
(i30 model shown)