Professional Documents
Culture Documents
zxczczc
Unit used should be: Mpa= N/mm^2
Projected area ang bearing stress not circumference area
Note when two plates are not equal use smaller thickness in t*d
Makukuha when you pass through the center of hole if dalawa yung hole consider both hole meaning L-
2(Diameter)
Yung una parang tensile strength of glue yung the consider the board
Mataas ang tensile strength ng plywood, imagine ma break sa middle ang plywood sa tapat ng glue kaya
ang area na ginamit ay A=thickness *(5.75)
Axial strain
one shaft at a time
Peitel book